DJI Mavic 3 Pro
Quick Answer
The DJI Mavic 3 Pro is a Mavic series DJI drone released in 2023, with 958 g, Hasselblad Camera: 4/3 CMOS, 4K/120fps slow motion, 43 min, 15km, and O3+ connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Mavic 3 Pro Comparison Snapshot
| Model position | Mavic series DJI drone, released 2023 |
| Flight profile | 958 g takeoff weight; 43 min flight time |
| Camera profile | Hasselblad Camera: 4/3 CMOS; 4K/120fps slow motion video |
| Signal profile | O3+; 15km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
About the DJI Mavic 3 Pro
DJI Mavic 3 Pro is a 2023 triple-camera aircraft with a 4/3 CMOS 20 MP Hasselblad wide camera, 70 mm medium tele and 166 mm tele cameras. DJI lists 958 g takeoff weight and up to 43 minutes of flight under its stated test conditions. The Hasselblad camera records up to 5.1K/50fps; its 4K/120fps mode plays as slow motion. O3+ transmission is rated up to 15 km FCC or 8 km CE/SRRC/MIC unobstructed and interference-free. Apple ProRes recording belongs to the separate Cine version.
Technical Specifications
| Takeoff Weight | Mavic 3 Pro: 958 g |
| Dimensions | Folded (without propellers): 231.1×98×95.4 mm (L×W×H) |
| Max Ascent Speed | 8 m/s |
| Max Descent Speed | 6 m/s |
| Max Horizontal Speed (at sea level, no wind) | 21 m/s |
| Max Takeoff Altitude | 6000 m |
| Max Flight Time | 43 minutes |
| Max Hovering Time | 37 minutes |
| Max Flight Distance | 28 km The flight distance is different from the video transmission distance. The data was tested in a controlled environment, under the following specific test conditions: flying at a constant speed of 50.4 kph in a windless environment at sea level, with APAS off, AirSense off, camera parameters set to 1080p/24fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. |
| Max Wind Speed Resistance | 12 m/s |
| Max Pitch Angle | 35° |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + Galileo + BeiDou |
| Hovering Accuracy Range | Vertical: ±0.1 m with vision positioning, ±0.5 m with GNSS; horizontal: ±0.3 m with vision positioning, ±0.5 m with GNSS. |
| Internal Storage | Mavic 3 Pro: 8 GB (approx. 7.9GB available space) |
| Class | C2 (EU) |
| Shutter Speed | Hasselblad Camera: 8-1/8000 s |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | O3+: 5.5 MB/s with DJI RC-N1, 15 MB/s with DJI RC Pro, or 5.5 MB/s with DJI RC; Wi-Fi 6: up to 80 MB/s under DJI's stated low-interference laboratory conditions with footage in internal storage. |
| Image Sensor | Hasselblad Camera: 4/3 CMOS, Effective Pixels: 20 MP |
| Lens | Hasselblad: 24 mm equivalent, 84° FOV, f/2.8–f/11, focus 1 m–∞; medium tele: 70 mm, 35° FOV, f/2.8, focus 3 m–∞; tele: 166 mm, 15° FOV, f/3.4, focus 3 m–∞. |
| ISO Range | Video Normal/Slow Motion: ISO 100–6400 Normal, 400–1600 D-Log, 100–1600 D-Log M or HLG; Night mode: 800–12800 Normal; Photo: 100–6400. |
| Max Image Size | Hasselblad: 5280×3956 pixels; medium tele: 8064×6048; tele: 4000×3000. |
| Still Photography Modes | Hasselblad: 20 MP single, 3/5/7-shot burst, 3/5-frame AEB at 0.7 EV and 2–60 s interval. Medium tele: 12 or 48 MP single/burst/AEB; interval 12 MP 2–60 s or 48 MP 7–60 s. Tele: 12 MP single/burst/AEB and 2–60 s interval. |
| Photo Format | JPEG/DNG (RAW) |
| Video Resolution | Hasselblad: 5.1K 5120×2700 up to 50fps, DCI 4K or 4K up to 120fps, FHD up to 200fps. Medium tele: 4K or FHD up to 60fps. Tele: 4K or FHD up to 60fps. Apple ProRes 422 HQ/422/422 LT recording is available only on the Cine version; 120/200fps files play as slow motion. |
| Video Format | MP4/MOV (MPEG-4 AVC/H.264, HEVC/H.265) |
| Max Video Bitrate | Hasselblad Camera: H.264/H.265: 200 Mbps ProRes 422 HQ: 3772 Mbps ProRes 422: 2514 Mbps ProRes 422 LT: 1750 Mbps Medium Tele Camera: H.264/H.265: 160 Mbps ProRes 422 HQ: 1768 Mbps ProRes 422: 1178 Mbps ProRes 422 LT: 821 Mbps Tele Camera: H.264/H.265: 160 Mbps ProRes 422 HQ: 1768 Mbps ProRes 422: 1178 Mbps ProRes 422 LT: 821 Mbps Only the Cine version supports ProRes recording. |
| Supported File System | exFAT |
| Color Mode and Sampling Method | Hasselblad Camera Normal: 10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT) 8-bit 4:2:0 (H.264/H.265) D-Log: 10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT) 10-bit 4:2:0 (H.264/H.265) HLG/D-Log M: 10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT) 10-bit 4:2:0 (H.265) Medium Tele Camera Normal: 10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT) 8-bit 4:2:0 (H.264/H.265)HLG/D-Log M: 10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT) 10-bit 4:2:0 (H.265) Tele Camera Normal: 10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT) 8-bit 4:2:0 (H.264/H.265) HLG/D-Log M: 10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT) 10-bit 4:2:0 (H.265) Only the Cine version supports ProRes recording. |
| Digital Zoom (only in Normal Video Mode and Explore Mode) | Hasselblad Camera: 1-3x |
| Stabilization | 3-axis mechanical gimbal (tilt, roll, pan) |
| Mechanical Range | Tilt: -140° to 50° |
| Controllable Range | Tilt: -90° to 35° |
| Angular Vibration Range | Hovering Without Wind: ±0.001° |
| Sensing Type | Omnidirectional binocular vision system, supplemented with an infrared sensor at the bottom of the aircraft |
| Forward | Measurement 0.5–20 m; detection 0.5–200 m; effective obstacle avoidance at ≤15 m/s; FOV 90° horizontal × 103° vertical. |
| Backward | Measurement 0.5–16 m; effective obstacle avoidance at ≤12 m/s; FOV 90° horizontal × 103° vertical. |
| Lateral | Measurement 0.5–25 m; effective obstacle avoidance at ≤15 m/s; FOV 90° horizontal × 85° vertical. |
| Upward | Measurement 0.2–10 m; effective obstacle avoidance at ≤6 m/s; FOV 100° front/back × 90° left/right. |
| Downward | Measurement 0.3–18 m; effective obstacle avoidance at ≤6 m/s; FOV 130° front/back × 160° left/right. |
| Operating Environment | Forward, backward, lateral and upward sensing: textured surfaces and light above 15 lux; downward sensing: textured, diffusely reflective surfaces above 20% reflectivity and light above 15 lux. |
| Video Transmission System | O3+ |
| Live View Quality | Remote controller: 1080p/30fps or 1080p/60fps. |
| Operating Frequency | 2.400-2.4835 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: <33 dBm FCC, <20 dBm CE/SRRC/MIC; 5.8 GHz: <33 dBm FCC, <30 dBm SRRC, <14 dBm CE. |
| Max Transmission Distance (unobstructed, free of interference) | FCC: 15 km |
| Max Transmission Distance (unobstructed, with interference) | FCC typical-condition test, unobstructed: strong urban interference approx. 1.5–3 km; medium suburban interference approx. 3–9 km; low-interference suburb/seaside approx. 9–15 km. These figures do not guarantee an actual flight distance. |
| Max Transmission Distance (obstructed, with interference) | FCC low-interference test with obstruction: buildings approx. 0–0.5 km; trees approx. 0.5–3 km. These figures do not guarantee an actual flight distance. |
| Lowest Latency | 130 ms (with DJI RC-N1 Remote Controller) |
| Antenna | 4 antennas, 2T4R |
| Rated Power | DJI 65W Portable Charger: 65 W |
| Guaranteed software updates until | 2026/12/31 |
| Official detailed specs | https://www.dji.com/cn/mavic-3-pro/specs (checked 2026-10-16) |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Mavic 3 Pro Parts Library
External
0 serviceable parts in this zone.
Circuit Boards
6 serviceable parts in this zone.
Flex Cables
1 serviceable parts in this zone.
Gimbal
2 serviceable parts in this zone.
Compatible Power & Accessories
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Propellers & Flight Consumables 1 options
Cases, Cables & Accessories 3 options
DJI Mavic 3 Pro — frequently asked questions
What is the maximum flight time of the DJI Mavic 3 Pro?
How far can the DJI Mavic 3 Pro transmit / fly?
What should I check if DJI Mavic 3 Pro has a problem?
Where can I get a DJI Mavic 3 Pro repaired?
Mavic research cluster
Research DJI Mavic 3 Pro, then choose the right pre-owned path.
This page supports the research layer. Use the buying guide, live collection, and Reboot Hub trust pages to connect specs, compatibility, inspection evidence, warranty terms, and current inventory before choosing a unit.