DJI Zenmuse H30T
About the DJI Zenmuse H30T
The DJI Zenmuse H30T is the thermal flagship of the H30 series, adding a 1280×1024 high-resolution radiometric thermal camera to the 40 MP zoom, 48 MP wide, laser rangefinder and an 850 nm NIR light. DJI supports it on Matrice 400, Matrice 350 RTK and Matrice 300 RTK (DJI RC Plus required for M300).
Technical Specifications
| Type | Penta-sensor payload (zoom + wide + thermal + LRF + NIR aux light) |
| Dimensions / Weight | 170×145×165 mm / 920±5 g (28 W) |
| Ingress Protection | IP54 |
| Supported Aircraft | Matrice 400; Matrice 350 RTK; Matrice 300 RTK (DJI RC Plus required for M300) |
| Zoom Camera | 1/1.8" CMOS 40 MP, 33.4–809.3 mm equiv. |
| Wide Camera | 1/1.3" CMOS 48 MP |
| Thermal Camera | 1280×1024 @30 fps, NETD ≤50 mK, spot/area/center measurement |
| Laser Rangefinder | 905 nm, 3–3000 m |
| NIR Auxiliary Light | 850 nm; 4.6±0.6° round FOV; approx. 8 m diameter circle at 100 m |
| Hybrid Optical / Max Zoom | 34× hybrid optical / 400× max zoom |
| Thermal Lens | 24 mm actual / 52 mm equivalent, f/0.95, 45.2° DFOV |
| Thermal Native Video / Photo | 1280×1024 at 30fps video; 1280×1024 R-JPEG stills |
| Thermal Measurement Range | High gain -20 to 150 °C, low gain 0 to 600 °C; with IR density filter -20 to 450 / 0 to 1600 °C |
| Laser Accuracy | ≤500 m: ±(0.2 m + D×0.15%); >500 m: ±1.0 m |
| Operating Temperature | -20 to 50 °C |
| microSD | U3/Class 10/V30 or above; exFAT |
| Data Source | DJI Zenmuse H30 Series User Manual v1.0 (official) |
| Current DJI Platform Source | https://enterprise.dji.com/zenmuse-h30-series/specs |
Common Failure Modes
Symptoms: The thermal view is missing, uneven or inconsistent with a known reference.
Likely areas: Lens/window condition, gain and palette settings, FFC/calibration state, environment and sensor path.
Check the exact model and DJI thermal test procedure before declaring the sensor defective.
Symptoms: A visible channel is unclear where fitted, or gimbal movement is unstable.
Likely areas: Lens, focus/zoom where fitted, gimbal, mount and firmware.
Keep visible and thermal channel symptoms separate in the service record.
Symptoms: The aircraft does not detect the payload or a channel/control is unavailable.
Likely areas: Supported aircraft/controller firmware, connector contacts, power and data link.
Power off before reseating; a firmware or pairing limit is not proof of board damage.
Symptoms: Wet contacts, damaged housing, scratched window or corrosion after exposure.
Likely areas: Seals, windows, contacts and internal power path.
Follow the exact model IP rating; no Zenmuse payload should be treated as submersible.
Repair Notes
Identify the exact thermal model and its visible/thermal channels before interpreting an image or temperature reading.
Record ambient conditions, gain, palette and calibration/FFC behavior using a controlled reference; do not infer sensor failure from one scene.
Power off before detaching the payload. Inspect connector contacts, housing and optical surfaces without forcing gimbal axes.
Retest the available channels, gimbal and temperature workflow against model-specific DJI guidance.
DJI Zenmuse H30T Parts Library
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsCompatible Power & Accessories
Compatible batteries and accessories are being mapped from verified Reboot Hub inventory.