DJI Mavic 3 Thermal
Quick Answer
The DJI Mavic 3 Thermal is a Mavic series DJI drone released in 2022, with 1,050 g max, 48MP + thermal, 4K/30fps, 45 min standard, 15 km (FCC); 8 km (CE/SRRC/MIC), and O3 Enterprise connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Mavic 3 Thermal Comparison Snapshot
| Model position | Mavic series DJI drone, released 2022 |
| Flight profile | 1,050 g max takeoff weight; 45 min standard flight time |
| Camera profile | 48MP + thermal; 4K/30fps video |
| Signal profile | O3 Enterprise; 15 km (FCC); 8 km (CE/SRRC/MIC) max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
About the DJI Mavic 3 Thermal
DJI Mavic 3 Thermal (M3T) is the 2022 enterprise thermal variant with integrated 1/2-inch CMOS 48 MP wide and 12 MP tele cameras plus a 640×512 radiometric thermal imager at 30 Hz. DJI lists 920 g configured weight with standard battery/propellers, separate from the 1,050 g maximum takeoff weight. Maximum flight time is 45 minutes with the standard 5,000 mAh Mavic 3 Series battery or 36 minutes with the EU C1 4,230 mAh battery and low-noise propellers under DJI test conditions. M3T thermal optics and camera identity differ from M3E and M3T Advanced.
Technical Specifications
| Weight | 920 g with standard battery and propellers, without accessories |
| Max Takeoff Weight | 1,050 g standard; 899 g with EU C1 battery + low-noise propellers (DJI regional setup) |
| Dimensions Folded | 221 x 96 x 90 mm |
| Dimensions Unfolded | 347.5 x 283 x 107.7 mm |
| Max Flight Time | 45 min standard 5,000 mAh battery/propellers; 36 min EU C1 4,230 mAh battery/low-noise propellers (DJI tests) |
| Max Speed | 21 m/s |
| Max Transmission Distance | DJI Mavic 3T: up to 15 km (FCC) or 8 km (CE/SRRC/MIC), unobstructed and interference-free; one-way test without payload. |
| Camera | Integrated 1/2-inch CMOS 48 MP wide, 1/2-inch CMOS 12 MP tele and 640×512 radiometric thermal cameras |
| Wide Camera | 1/2-inch CMOS, 48 MP; 24 mm equivalent f/2.8 |
| Tele Camera | 1/2-inch CMOS, 12 MP; 162 mm equivalent f/4.4 |
| Thermal Camera | Uncooled VOx; 640×512 at 30 Hz; 12 μm pixel pitch, 40 mm equivalent lens (M3T, not M3TA) |
| Thermal Measurement | Spot and area measurement; high gain −20°C to 150°C, low gain 0°C to 500°C under DJI conditions |
| Thermal Files | 16-bit radiometric R-JPEG stills; H.264 MP4 thermal video at 640×512/30fps |
| Battery Model | DJI Mavic 3 Series Intelligent Flight Battery (standard); Mavic 3 Enterprise Series Battery (EU C1 Version) is a distinct option |
| Battery Capacity | 5,000 mAh standard; 4,230 mAh EU C1 version |
| Charging System | DJI charger |
| GNSS | GPS + Galileo + BeiDou; GLONASS when RTK module is enabled |
| Obstacle Sensing | Omnidirectional |
| Remote Controller Compatibility | DJI RC Pro Enterprise |
| App | DJI Pilot 2 |
| Official detailed specs | https://enterprise.dji.com/mavic-3-enterprise/specs (checked 2026-10-16) |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Mavic 3 Thermal Parts Library
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsCompatible Power & Accessories
Compatible batteries and accessories are being mapped from verified Reboot Hub inventory.