The DJI Mavic Pro is a Mavic series DJI drone released in 2016, with 734 g, 1/2.3” (CMOS), 4K, 27 min, 7 km, and OcuSync 1.0 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Mavic series DJI drone, released 2016 |
| Flight profile | 734 g takeoff weight; 27 min flight time |
| Camera profile | 1/2.3” (CMOS); 4K video |
| Signal profile | OcuSync 1.0; 7 km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Mavic Pro is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Mavic Pro, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Mavic Pro. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
The original Mavic Pro is a discontinued model, so a useful quote should identify the confirmed fault, board or assembly revision, part provenance, donor history where applicable, calibration needs, post-repair tests, battery and controller condition, and the written warranty for the work.
Compare the diagnosis with the current repair cost database and the aircraft's verified replacement value. Use the repair intake path when the quote depends on board-level evidence or a legacy donor component.
The DJI Mavic Pro, introduced in 2016 as part of the Mavic series, is a prosumer-grade drone. It incorporates a 4K camera with a 1/2.3-inch CMOS sensor and utilizes OcuSync 1.0 transmission for a maximum range of 7 kilometers.
| Weight (Battery & Propellers Included) | 1.62 lbs (734 g) (exclude gimbal cover) |
| Max Ascent Speed | 16.4 ft/s (5 m/s) in Sport mode |
| Max Descent Speed | 9.8 ft/s (3 m/s) |
| Max Speed | 40 mph (65 kph) in Sport mode without wind |
| Maximum Takeoff Altitude | 16404 feet (5000 m) |
| Max Flight Time | 27 minutes (no wind at a consistent 15.5 mph (25 kph)) |
| Max Hovering Time | 24 minutes (no wind) |
| Overall Flight Time | 21 minutes ( In normal flight, 15% remaining battery level ) |
| Max Total Travel Distance (One Full Battery, No Wind) | 8 mi (13 km, no wind) |
| Operating Temperature Range | 32° to 104° F (0° to 40° C) |
| Satellite Positioning Systems | GPS / GLONASS |
| Electronic Shutter Speed | 8s -1/8000 s |
| Altitude Range | 1 - 43 feet (0.3 - 13 m) |
| Net Weight | Approx.0.5 lbs(240 g) |
| Sensor | 1/2.3” (CMOS), Effective pixels:12.35 M (Total pixels:12.71M) |
| Lens | FOV 78.8° 26 mm (35 mm format equivalent) f/2.2 |
| ISO Range | video: 100-3200 |
| Image Size | 4000×3000 |
| Still Photography Modes | Single shot |
| Max Video Bitrate | 60 Mbps |
| Supported File Systems | FAT32 ( ≤ 32 GB ); exFAT ( > 32 GB ) |
| Photo | JPEG, DNG |
| Obstacle Sensory Range | Precision measurement range: 2 ft (0.7 m) to 49 ft (15 m) Detectable range: 49 ft (15 m) to 98 ft (30 m) |
| Controllable Range | Pitch: -90° to +30° |
| Stabilization | 3-axis (pitch, roll, yaw) |
| Operating Environment | Surface with clear pattern and adequate lighting (lux > 15) |
| Operating Frequency | FCC: |
| Transmitter Power (EIRP) | 2.4GHz |
| Max Transmission Distance | FCC Compliant: 4.3 mi (7 km); |
| Live View Quality | 720p@30fps, 1080p@30fps（Remote Controller） |
| Folded | H83mm x W83mm x L198mm |
| Diagonal Size (Propellers Excluded) | 335 mm |
| Hover Accuracy Range | Vertical: |
| Video Recording Modes | C4K: 4096×2160 24p |
| Video | MP4, MOV (MPEG-4 AVC/H.264) |
| Supported SD Cards | Micro SD™ |
| Battery | 2970mAh |
| Operating Current/Voltage | 950mA @ 3.7V |
| Voltage | 13.05 V |
| Rated Power | 50 W |
| Vision System | Forward Vision System |
| Velocity Range | ≤22.4 mph (36 kph) at 6.6 ft (2 m) above ground |
| Operating Range | 1 - 43 feet (0.3 - 13 m) |
| Mobile App | DJI GO 4 |
| Latency | 160-170ms (depending on conditions and mobile device) |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
5 serviceable parts in this zone.
2 serviceable parts in this zone.
0 serviceable parts in this zone.
1 serviceable parts in this zone.
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
