DJI Inspire 1 Pro
Quick Answer
The DJI Inspire 1 Pro is a Inspire series DJI drone released in 2015, with 3,396 g (X5 + TB47); 3,496 g (X5 + TB48), Type 4/3 CMOS (Zenmuse X5), 4K/30fps (X5), 15 min (TB47); 18 min (TB48), 5 km (FCC); 3.5 km (CE); 2 km (MIC), and Lightbridge connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Inspire 1 Pro Comparison Snapshot
| Model position | Inspire series DJI drone, released 2015 |
| Flight profile | 3,396 g (X5 + TB47); 3,496 g (X5 + TB48) takeoff weight; 15 min (TB47); 18 min (TB48) flight time |
| Camera profile | Type 4/3 CMOS (Zenmuse X5); 4K/30fps (X5) video |
| Signal profile | Lightbridge; 5 km (FCC); 3.5 km (CE); 2 km (MIC) max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
About the DJI Inspire 1 Pro
DJI Inspire 1 Pro is the X5-equipped Inspire 1 variant. Its Zenmuse X5 uses a 16 MP Micro Four Thirds sensor and interchangeable compatible lenses, and records up to 4K video. DJI lists 3,396 g with X5 and TB47 or 3,496 g with X5 and TB48; flight ratings are approximately 15 and 18 minutes respectively. The Lightbridge controller rating is up to 5 km FCC, 3.5 km CE or 2 km MIC unobstructed and interference-free. Check the installed camera, lens and battery before selecting parts.
Technical Specifications
| GPS Hovering Accuracy | Vertical: ±1.64 feet (0.5 m)Horizontal: ±8.20 feet (2.5 m) |
| Max Pitch Angle | 35° |
| Max Ascent Speed | 16.4 ft/s (5 m/s) |
| Max Descent Speed | 13.1 ft/s (4 m/s) |
| Max Speed | 49 mph or 79 kph (ATTI mode, no wind) |
| Max Wind Speed Resistance | 10 m/s |
| Max Flight Time | Approx. 15 min with Zenmuse X5 + TB47; 18 min with X5 + TB48. |
| Indoor Hovering | Enabled by default |
| Operating Temperature | 14° to 104° F (-10° to 40° C) |
| Max Takeoff Weight | 7.71 lbs(3500 g) |
| Max Controllable Speed | Pitch 120°/s; pan 180°/s (Zenmuse X5). |
| Storage Temperature | Less than 3 months: -4° to 113° F (-20° to 45° C) |
| Electronic Shutter Speed | 8s － 1/8000s |
| Camera Operating Temperature | 0° to 40° C (Zenmuse X5). |
| Standard Flight Battery Weight | 570 g (TB47) |
| Storage Temperature Range | Less than 3 months: -4° to 113° F (-20° to 45° C) |
| Altitude Range | 5-500 cm |
| ISO Range | 100–6400 (video); 100–25600 (stills), Zenmuse X5. |
| Lens | Interchangeable Micro Four Thirds lens; kit DJI MFT 15 mm f/1.7 ASPH (30 mm equivalent, focus 0.2 m–∞). |
| Still Photography Modes | Single shot; 3/5/7-shot burst; 3/5-frame AEB at 0.7 EV; time-lapse at 5/7/10/20/30-second intervals. |
| Max Bitrate of Video Storage | 60 Mbps |
| Ultrasonic Sensor Operating Range | 0.17-16.4 feet (5-500 cm) |
| Ultrasonic Sensor Operating Environment | Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance) |
| Angular Vibration Range | ±0.02° (Zenmuse X5). |
| Controllable Range | Pitch -90° to +30°; pan ±320° (Zenmuse X5). |
| Mechanical Range | Pitch -130° to +45°; pan ±330°; roll ±45° (Zenmuse X5). |
| Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
| Operating Frequency | 922.7-927.7 MHz (Japan Only) |
| Model | T600 |
| Max Angular Velocity | Pitch: 300°/s |
| Max Takeoff Sea Level | 1.55 mi (2500 m) |
| Motor Model | DJI 3510H |
| Propeller Model | DJI 1345T |
| Diagonal Distance(propeller excluded) | 22.8 inch (581 mm, Landing Mode) |
| Interface Type | Detachable |
| Max Transmitting Distance(unobstructed, free of interference) | Up to 5 km (FCC), 3.5 km (CE), or 2 km (MIC), unobstructed and free of interference. |
| EIRP | 10dBm@900m, 13dBm@5.8G, 20dBm@2.4G |
| Video Output Ports | USB, mini-HDMI |
| Power Supply | Built-in battery |
| Charging | DJI charger |
| Dual User Capability | Host-and-Slave connection |
| Mobile Device Holder | Tablet or Smart Phone |
| Max Mobile Device Width | 170mm |
| Remote Controller Battery | 6000 mAh 2S LiPo |
| Name | Zenmuse X5 |
| Max Pixels | 16 MP maximum still image |
| Effective Pixels | 16 MP (Zenmuse X5). |
| Image Max Size | 4608×3456 pixels (Zenmuse X5). |
| FOV (Field of View) | 72° with the DJI MFT 15 mm f/1.7 kit lens; varies with lens. |
| CMOS | Type 4/3 CMOS (Zenmuse X5). |
| Video Recording Modes | 4K 4096×2160 at 24/25p or 3840×2160 at 24/25/30p; 2.7K 2704×1520 at 24/25/30p; FHD 1920×1080 at 24/25/30/48/50/60p. |
| Supported File Formats | FAT32 (up to 32 GB) or exFAT (over 32 GB); JPEG/DNG photos and MP4/MOV (H.264) video. |
| Supported SD Card Types | MicroSD up to 64 GB; Class 10 or UHS-1 or higher. |
| Voltage | 26.3 V |
| Rated Power | 100 W |
| Velocity Range | <26.2 ft/s (8 m/s) at height of 6.56 feet (2 m) |
| Operating Range | <9.8 feet (3 m) |
| Mobile Device System Requirements | iOS 8.0 or later, Android 4.1.2 or later |
| Flight Battery (Standard) | TB47 Intelligent Flight Battery: 4500 mAh, 22.2 V, 6S LiPo. |
| Flight Battery (Optional) | TB48 Intelligent Flight Battery: 5700 mAh, 22.8 V, 6S LiPo. |
| Official detailed specs | https://dl.djicdn.com/downloads/zenmuse_x5s/en/Zenmuse_X5_User_Manual_en__v1.0.pdf |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Inspire 1 Pro Parts Library
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsCompatible Power & Accessories
Compatible batteries and accessories are being mapped from verified Reboot Hub inventory.