DJI Inspire 1 V2
Quick Answer
The DJI Inspire 1 V2 is a Inspire series DJI drone released in 2015, with 2,935 g (battery included), 1/2.3-inch CMOS, 12.4 MP, 4K/30fps (X3), 18 min, 5 km (FCC); 3.5 km (CE); 2 km (MIC), and Lightbridge connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Inspire 1 V2 Comparison Snapshot
| Model position | Inspire series DJI drone, released 2015 |
| Flight profile | 2,935 g (battery included) takeoff weight; 18 min flight time |
| Camera profile | 1/2.3-inch CMOS, 12.4 MP; 4K/30fps (X3) video |
| Signal profile | Lightbridge; 5 km (FCC); 3.5 km (CE); 2 km (MIC) max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
About the DJI Inspire 1 V2
DJI Inspire 1 V2.0 ships with a Zenmuse X3 camera mounted on the X5-style damping plate; Inspire 1 Pro instead ships with the X5. Its X3 has a 1/2.3-inch 12.4 MP sensor and records up to 4K/30fps. The cited 2,935 g is a battery-included configuration, not the maximum takeoff weight. DJI lists approximately 18 minutes of flight and a Lightbridge controller link up to 5 km FCC, 3.5 km CE or 2 km MIC unobstructed and interference-free. Verify the installed payload and firmware.
Technical Specifications
| GPS Hovering Accuracy | Vertical: ±1.64 feet (0.5 m)Horizontal: ±8.20 feet (2.5 m) |
| Max Pitch Angle | 35° |
| Max Ascent Speed | 16.4 ft/s (5 m/s) |
| Max Descent Speed | 13.1 ft/s (4 m/s) |
| Max Speed | 49 mph or 79 kph (ATTI mode, no wind) |
| Max Wind Speed Resistance | 10 m/s |
| Max Flight Time | Approx. 18 min |
| Indoor Hovering | Enabled by default |
| Operating Temperature | 14° to 104° F (-10° to 40° C) |
| Max Takeoff Weight | 7.71 lbs(3500 g) |
| Max Controllable Speed | Pitch: 120°/s |
| Storage Temperature | Less than 3 months: -4° to 113° F (-20° to 45° C) |
| Electronic Shutter Speed | 8s － 1/8000s |
| Operating Temperature Range | 0° to 40° C |
| Standard Flight Battery Weight | 570 g (TB47) |
| Storage Temperature Range | Less than 3 months: -4° to 113° F (-20° to 45° C) |
| Altitude Range | 5-500 cm |
| ISO Range | 100-3200 (video) |
| Lens | 20mm (35mm format equivalent)f/2.8 focus at ∞ |
| Still Photography Modes | Single shot; 3/5/7-shot burst; 3/5-frame AEB at 0.7 EV; time-lapse at 5/7/10/20/30-second intervals. |
| Max Bitrate of Video Storage | 60 Mbps |
| Ultrasonic Sensor Operating Range | 0.17-16.4 feet (5-500 cm) |
| Ultrasonic Sensor Operating Environment | Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance) |
| Angular Vibration Range | ±0.03° |
| Controllable Range | Pitch: -90° to +30° |
| Mechanical Range | Pitch: -125° to +45° |
| Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
| Operating Frequency | 922.7-927.7 MHz (Japan Only) |
| Model | T600 |
| Max Angular Velocity | Pitch: 300°/s |
| Max Takeoff Sea Level | 1.55 mi (2500 m) |
| Motor Model | DJI 3510H |
| Propeller Model | DJI 1345T |
| Diagonal Distance(propeller excluded) | 22.8 inch (581 mm, Landing Mode) |
| Interface Type | Detachable |
| Max Transmitting Distance(unobstructed, free of interference) | Up to 5 km (FCC), 3.5 km (CE), or 2 km (MIC), unobstructed and free of interference. |
| EIRP | 10dBm@900m, 13dBm@5.8G, 20dBm@2.4G |
| Video Output Ports | USB, mini-HDMI |
| Power Supply | Built-in battery |
| Charging | DJI charger |
| Dual User Capability | Host-and-Slave connection |
| Mobile Device Holder | Tablet or Smart Phone |
| Max Mobile Device Width | 170mm |
| Remote Controller Battery | 6000 mAh 2S LiPo |
| Name | X3 |
| Total Pixels | 12.76M |
| Effective Pixels | 12.4M |
| Image Max Size | 4000x3000 |
| FOV (Field of View) | 94° |
| CMOS | 1/2.3” CMOS |
| Video Recording Modes | UHD (4K): 4096x2160p24/25, 3840x2160p24/25/30 |
| Supported File Formats | FAT32/exFAT |
| Supported SD Card Types | Micro SD |
| Voltage | 26.3 V |
| Rated Power | 100 W |
| Velocity Range | <26.2 ft/s (8 m/s) at height of 6.56 feet (2 m) |
| Operating Range | <9.8 feet (3 m) |
| Mobile Device System Requirements | iOS 8.0 or later, Android 4.1.2 or later |
| Flight Battery (Standard) | TB47 Intelligent Flight Battery: 4500 mAh, 22.2 V, 6S LiPo. |
| Flight Battery (Optional) | TB48 Intelligent Flight Battery: 5700 mAh, 22.8 V, 6S LiPo. |
| Official detailed specs | https://www.dji.com/support/product/inspire-1 |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Inspire 1 V2 Parts Library
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsCompatible Power & Accessories
Compatible batteries and accessories are being mapped from verified Reboot Hub inventory.