DJI Phantom 4 Advanced
Quick Answer
The DJI Phantom 4 Advanced is a Phantom series DJI drone released in 2017, with 1368g, 1’’ CMOS, 4K, 30 min, 7km, and Lightbridge connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Phantom 4 Advanced Comparison Snapshot
| Model position | Phantom series DJI drone, released 2017 |
| Flight profile | 1368g takeoff weight; 30 min flight time |
| Camera profile | 1’’ CMOS; 4K video |
| Signal profile | Lightbridge; 7km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
DJI Phantom 4 Advanced FAQ
What is the DJI Phantom 4 Advanced best used for?
The DJI Phantom 4 Advanced is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Is the DJI Phantom 4 Advanced repairable?
Yes. Reboot Hub maps serviceable parts for the DJI Phantom 4 Advanced, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
How should I compare the DJI Phantom 4 Advanced with another DJI drone?
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Can I buy pre-owned DJI Phantom 4 Advanced parts from Reboot Hub?
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Phantom 4 Advanced. Match the exact model, part zone, and connector generation before ordering a replacement.
What should I check before buying a used DJI Phantom 4 Advanced?
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
Specification answer
What are the key DJI Phantom 4 Advanced specifications?
Quick answer: DJI lists the Phantom 4 Advanced with approximately 30 minutes of maximum flight time, 10 m/s maximum wind-speed resistance, and 20 m/s maximum speed in S-mode. For pre-owned buying, check the battery generation, propellers, gimbal/camera behavior, remote controller condition, and whether the aircraft has older app or firmware constraints.
About the DJI Phantom 4 Advanced
The DJI Phantom 4 Advanced is a 2017 prosumer drone in the Phantom series. It features a 1-inch CMOS sensor capable of recording 4K video and offers a flight time of approximately 30 minutes. The aircraft utilizes Lightbridge transmission technology, providing a maximum control range of 7 km.
Technical Specifications
| Weight (Battery & Propellers Included) | 1368 g |
| Max Ascent Speed | S-mode: 6 m/s |
| Max Descent Speed | S-mode:4 m/s |
| Max Speed | S-mode: 45 mph (72 kph) |
| Max Pitch Angle | S-mode:42° |
| Max Angular Speed | S-mode: 250°/s |
| Max Wind Speed Resistance | 10 m/s |
| Max Flight Time | Approx. 30 minutes |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Satellite Positioning Systems | GPS/GLONASS |
| Max Controllable Angular Speed | Pitch: 90°/s |
| Altitude Range | 0 - 33 feet (0 - 10 m) |
| Mechanical Shutter Speed | 8 - 1/2000 s |
| Electronic Shutter Speed | 8 - 1/8000 s |
| Net Weight | 468 g |
| Obstacle Sensory Range | 2 - 98 feet (0.7 - 30 m) |
| Sensor | 1’’ CMOS |
| Lens | FOV 84° 8.8 mm/24 mm (35 mm format equivalent) f/2.8 - f/11 auto focus at 1 m - ∞ |
| ISO Range | Video: |
| Image Size | 3:2 Aspect Ratio: 5472 × 3648 |
| PIV Image Size | 4096×2160(4096×2160 24/25/30/48/50p) |
| Still Photography Modes | Single Shot |
| Max Video Bitrate | 100 Mbps |
| Supported File Systems | FAT32 (≤32 GB); exFAT (>32 GB) |
| Photo | JPEG, DNG (RAW), JPEG + DNG |
| Stabilization | 3-axis (pitch, roll, yaw) |
| Controllable Range | Pitch: -90° to +30° |
| Angular Vibration Range | ±0.02° |
| Operating Environment | Surface with clear pattern and adequate lighting (lux>15) |
| Measuring Frequency | Forward: 10 Hz |
| Operating Frequency | 2.400 - 2.483 GHz |
| Max Transmission Distance | 2.400 - 2.483 GHz (Unobstructed, free of interference) |
| Transmitter Power (EIRP) | 2.400 - 2.483 GHz |
| Live View Working Frequency | 2.4 GHz ISM |
| Live View Quality | 720P @ 30fps |
| Diagonal Size (Propellers Excluded) | 350 mm |
| Max Service Ceiling Above Sea Level | 19685 feet (6000 m) |
| Hover Accuracy Range | Vertical: |
| Vision System | Forward Vision System |
| Velocity Range | ≤31 mph (50 kph) at 6.6 ft (2 m) above ground |
| Operating Range | 0 - 33 feet (0 - 10 m) |
| FOV | Forward: 60°(Horizontal), ±27°(Vertical) |
| Video Recording Modes | H.265 |
| Video | MP4/MOV (AVC/H.264; HEVC/H.265) |
| Supported SD Cards | Micro SD |
| Battery | 6000 mAh LiPo 2S |
| Operating Current/Voltage | 1.2 A@7.4 V |
| Video Output Port | GL300E: HDMI |
| Mobile Device Holder | GL300E: Built-in display device (5.5 inch screen, 1920×1080, 1000 cd/m2, Android system, 4 GB RAM＋16 GB ROM) GL300C: Tablets and smart phones |
| Voltage | 17.5V |
| Rated Power | 100 W |
| Mobile App | DJI GO 4 |
| Latency | Phantom 4 Advanced: 220 ms (depending on conditions and mobile device) |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Phantom 4 Advanced Parts Library
External
0 serviceable parts in this zone.
Circuit Boards
3 serviceable parts in this zone.
Flex Cables
0 serviceable parts in this zone.
Gimbal
1 serviceable parts in this zone.
Compatible Power & Accessories
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.