The DJI Neo 2 is a Neo series DJI drone released in 2025, with 151 g, 1/2-inch CMOS, 4K/100fps, 19 min, 10 km, and Wi-Fi connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Neo series DJI drone, released 2025 |
| Flight profile | 151 g takeoff weight; 19 min flight time |
| Camera profile | 1/2-inch CMOS; 4K/100fps video |
| Signal profile | Wi-Fi; 10 km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Neo 2 is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Neo 2, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Neo 2. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
Specification answer
Quick answer: DJI lists Neo 2 at 151 g without the DJI Neo 2 Digital Transceiver and 160 g with it. Official product materials describe a 12MP 1/2-inch CMOS sensor, f/2.2 aperture, 4K/60fps video, and 4K/100fps slow motion. For buying, confirm controller path, propeller guards, and bundle contents.
The DJI Neo 2, released in 2025, is an entry-level drone within the Neo series. It weighs 151 grams and includes a 4K/100fps camera with a 1/2-inch CMOS sensor. The drone has a max transmission range of 10 km via Wi-Fi and a flight time of 19 minutes.
| Takeoff Weight | 151 g (without DJI Neo 2 Digital Transceiver) |
| Dimensions | 147×171×41 mm (L×W×H, with propeller guards and without DJI Neo 2 Digital Transceiver) |
| Max Ascent Speed | 0.5 m/s (Cine mode) |
| Max Descent Speed | 0.5 m/s (Cine Mode) |
| Max Horizontal Speed | 8 m/s (Normal Mode) |
| Max Takeoff Altitude | 2000 m |
| Max Flight Time | Approx. 19 minutes (approx. 17 minutes with the propeller guards)* |
| Max Hovering Time | Approx. 18 minutes (16.5 minutes with the propeller guards) |
| Max Flight Distance | 7 km |
| Max Wind Speed Resistance | 10.7 m/s (Level 5) |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + Galileo + BeiDou |
| Hovering Accuracy Range | Vertical: |
| Internal Storage | 49 GB |
| Class | C0 (EU) |
| Shutter Speed | Video: 1/8000-1/30 s |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | Wi-Fi: 80 MB/s |
| Image Sensor | 1/2-inch CMOS Sensor |
| Lens | FOV: 119.8° |
| ISO Range | Photo |
| Max Image Size | 12 MP Photo |
| Still Photography Modes | Single/Timed Shot |
| Photo Format | JPEG |
| Video Resolution | Horizontal Shooting: |
| Video Format | MP4 |
| Max Video Bitrate | 80 Mbps |
| Supported File System | exFAT |
| Color Mode | Normal |
| Infrared Sensor | Forward-Facing LiDAR: |
| Stabilization | 2-axis mechanical gimbal (tilt, roll) |
| Mechanical Range | Tilt: -125° to 105° |
| Controllable Range | Tilt: -90° to 70° |
| Angular Vibration Range | ±0.01° |
| Sensing Type | Omnidirectional monocular vision system, paired with a downward infrared sensing system and forward-facing LiDAR |
| Forward | Measurement Range: 0.5-10 m |
| Backward | Detection Range: 0.5-15 m |
| Lateral | Detection Range: 0.5-15 m |
| Upward | Detection Range: 0.5-15 m |
| Downward | Detection Range: 0.5-15 m |
| Operating Environment | Forward, Backward, Left, Right, and Upward: |
| Video Transmission System | Standard: Wi-Fi Video Transmission |
| Live View Quality | With DJI RC-N3 Remote Controller: Up to 1080p/60fps |
| Operating Frequency | 2.400 GHz to 2.4835 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: |
| Max Transmission Distance (unobstructed, free of interference) | FCC: 10 km |
| Max Transmission Distance (unobstructed, with interference) | Strong Interference: Urban landscape, approx. 1.5-3 km |
| Max Transmission Distance (obstructed, with interference) | Low Interference and Obstructed by Buildings: Approx. 0-0.5 km |
| Lowest Latency | With DJI RC-N3 Remote Controller or DJI RC 2 Remote Controller: Approx. 120 ms |
| Antenna | 2 antennas, 1T2R |
| Protocol | 802.11a/b/g/n/ac/ax |
| EIS | Supports RockSteady and turning stabilization off*. |
| Image Roll Correction | Supports correction of footage recorded on the drone. |
| Communication Bandwidth | Max 60 MHz |
| Effective Operating Range | 500 m |
| Charging Method | 3 batteries charged simultaneously |
| Max Operating Time | Without charging any mobile device: 3.5 hours |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsVerified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
