DJI Goggles N3 Wiki | Compatibility & Buying Guide

Quick Answer

DJI Goggles N3 supports Avata 360, Neo 2, Neo and Avata 2 in DJI’s current matrix. Avata 360 requires RC Motion 3 or FPV Remote Controller 3; standard controllers cannot be combined with goggles.

Specifications

ModelTKGSM

DisplaySingle 3.5-inch LCD, 1920 × 1080, up to 60 Hz

Field of View54°

Weight536 g including headband and battery

EyeglassesCan be worn with personal glasses; no diopter adjustment

Video TransmissionDJI O4; range and latency depend on aircraft and region

Battery2450 mAh, 17.64 Wh; up to 2.7 hours under DJI test conditions

Avata 360 control pathPair with DJI RC Motion 3 or DJI FPV Remote Controller 3

Official sourceshttps://www.dji.com/goggles-n3/specs · https://repair.dji.com/help/content?customId=01700010143&lang=en&paperDocType=ARTICLE&re=US&spaceId=17 · https://repair.dji.com/help/content?customId=01700043652&lang=en&paperDocType=ARTICLE&re=DK&spaceId=17

Compatibility Notes

DJI compatibility is aircraft, controller, headset, firmware, and region dependent.

DJI Avata 360 DJI Neo 2 DJI Neo DJI Avata 2

Inspection Checklist

LCD and optics

Check the 1080p LCD for dead pixels, brightness imbalance, haze and lens-window damage while wearing prescription glasses if needed.

Battery and headband

Check integrated-battery charging and runtime, headband fit, face foam and shell condition.

Cooling and interfaces

Verify one-tap defogging/fan behavior, USB-C live-feed path, microSD recording, buttons and firmware.

Avata 360 pairing

Test Avata 360 only with DJI RC Motion 3 or FPV Remote Controller 3; standard RC 2/RC-N2/RC-N3 cannot be combined with goggles.

Common Failure Modes

LCD or optical fault

Dead pixels, dim display, scratches or haze can compromise the flight view.

Battery or cooling fault

A degraded integrated battery, charging port or fan can shorten runtime or cause fogging.

Pairing or link fault

Firmware, controller path or antenna/RF faults can prevent a stable O4 link.

Repair Notes

Confirm the exact DJI aircraft, goggles, controller, firmware and region pairing before hardware diagnosis.
Inspect screens, lenses, fan, antennas, ports, power and wearable parts; record faults before opening the headset.
After repair, verify firmware, charging and a controlled short-range live-view test with the supported aircraft.

Pre-Owned Buying Checks

Confirm the exact goggles model, supported aircraft and controller generation.
Inspect displays, lenses, headband, foam, fan, antennas, ports, battery and included accessories.
Require a controlled pairing and live-view test; do not infer compatibility from a similar-looking headset.