Mavic Series / Released 2021

DJI Mavic 3

Mavic Series Prosumer 895 g
DJI Mavic 3
895 g
Takeoff Weight
15.0
Max Range
46 min
Flight Time
4K/120fps
Max Video
4/3 CMOS
Sensor
O3+
Transmission

About the DJI Mavic 3

The DJI Mavic 3, released in 2021, is a prosumer-tier drone within the Mavic series. It features a 4/3 CMOS sensor for imaging and offers a maximum flight time of 46 minutes.

Technical Specifications

Takeoff WeightMavic 3: 895 g
Dimensions (Folded/Unfolded)Folded (without propellers) 221×96.3×90.3 mm
Max Ascent Speed1 m/s (C mode)
Max Descent Speed1 m/s (C mode)
Max Flight Speed (at sea level, no wind)5 m/s (C mode)
Max Flight Time (no wind)46 minutes *
Max Hovering Time (no wind)40 minutes *
Max Flight Distance30 km The flight distance is different from the video transmission distance. The data was tested in a controlled environment, under the following specific test conditions: flying at a constant speed of 50.4 kph in a windless environment at sea level, with APAS off, AirSense off, camera parameters set to 1080p/24fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
Max Wind Speed Resistance12 m/s
Max Pitch Angle25° (C mode)
Operating Temperature-10° to 40° C (14° to 104° F)
GNSSGPS + Galileo + BeiDou
Hovering Accuracy RangeVertical: ±0.1 m (with Vision Positioning); ±0.5 m
Internal StorageMavic 3: 8 GB (available space is approx. 7.9 GB)
Shutter SpeedElectronic Shutter: 8-1/8000 s
Max Control Speed (tilt)100°/s
Sensor4/3 CMOS, Effective pixels: 20 MP
LensFOV: 84°
ISO RangeVideo: 100-6400
Max Image SizeMain Unit: 5280×3956
Still Photography ModesSingle shot: 20MP Photos
Video ResolutionApple ProRes 422 HQ
Max Video BitrateH.264/H.265 Bitrate: 200 Mbps
Photo FormatJPEG/DNG (RAW)
Video FormatsMavic 3:
Digital Zoom7-28x
Max Download BitrateO3+:
Stabilization3-axis motorized (tilt, roll, pan)
Mechanical RangeTilt: -135° to 100°
Controllable RangeTilt: -90° to 35°
Angular Vibration Range±0.007°
Sensing SystemOmnidirectional binocular vision system, supplemented with an infrared sensor at the bottom of the aircraft
ForwardMeasurement Range: 0.5-20 m
BackwardMeasurement Range: 0.5-16 m
LateralMeasurement Range: 0.5-25 m
UpwardMeasurement Range: 0.2-10 m
DownwardMeasurement Range: 0.3-18 m
Operating EnvironmentForward, Backward, Left, Right, and Upward: Surface with a clear pattern and adequate lighting (lux>15)
Video Transmission SystemO3+
Live View QualityRemote Controller: 1080p@30fps/1080p@60fps
Operation Frequency2.400-2.4835 GHz
Max Transmission Distance (unobstructed, free of interference and aligned with controller)2.400-2.4835 GHz; 5.725-5.850 GHz
Signal Transmission Ranges (FCC)Strong Interference (urban landscape, limited line of sight, many competing signals): Approx. 1.5-3 km
Antennas4 antennas, 2T4R
Transmitter Power (EIRP)2.4 GHz: ≤33 dBm (FCC); ≤20 dBm (CE/SRRC/MIC)
Remote Controller Transmission SystemWhen used with different aircraft hardware configurations, DJI RC-N1 Remote Controllers will automatically select the corresponding firmware version for updating and support the following transmission technologies enabled by the hardware performance of the linked aircraft models:
Diagonal Length380.1 mm
Max Service Ceiling Above Sea Level6000 m
Max Angular Velocity200°/s
Supported File FormatsexFAT
Latency (depending on environmental conditions and mobile device)130 ms (with RC-N1 remote controller)
Voltage15.4 V
Charging Voltage Limit17.6 V
USB-C OutputUSB-C: 5.0 V⎓5.0 A/9.0 V⎓5.0 A/12.0 V⎓5.0 A/15.0 V⎓4.3 A/20.0 V⎓3.25 A/5.0~20.0 V⎓3.25 A
USB-A outputUSB-A: 5 V⎓2 A
Rated Power65 W
SSD SpecsMavic 3: 8 GB (available space is approx. 7.2 GB)
Battery LifeWithout charging any mobile device: 6 hr;
Supported USB Port TypesLightning, Micro USB, USB-C
Guaranteed software updates until2026/12/31

DJI Mavic 3 Parts Library

serviceable parts in this zone.

serviceable parts in this zone.

serviceable parts in this zone.

serviceable parts in this zone.

serviceable parts in this zone.

Repairing a DJI Mavic 3?

Match the exact part first, then choose OEM parts or technician installation.

Shop Parts Collection Repair Options