DJI Matrice 400
Quick Answer
The DJI Matrice 400 is a Matrice series DJI drone released in 2025, with 15.8kg, DJI camera system, DJI video modes, 59min, model-specific range, and DJI transmission system connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Matrice 400 Comparison Snapshot
| Model position | Matrice series DJI drone, released 2025 |
| Flight profile | 15.8kg takeoff weight; 59min flight time |
| Camera profile | Check the model-specific camera module |
| Signal profile | DJI transmission system |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
DJI Matrice 400 FAQ
What is the DJI Matrice 400 best used for?
The DJI Matrice 400 is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Is the DJI Matrice 400 repairable?
Yes. Reboot Hub maps serviceable parts for the DJI Matrice 400, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
How should I compare the DJI Matrice 400 with another DJI drone?
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Can I buy pre-owned DJI Matrice 400 parts from Reboot Hub?
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Matrice 400. Match the exact model, part zone, and connector generation before ordering a replacement.
What should I check before buying a used DJI Matrice 400?
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
About the DJI Matrice 400
The DJI Matrice 400 is DJI's flagship enterprise flight platform, designed for professional inspection, public-safety, mapping and heavy-payload operations. DJI specifies up to 59 minutes of flight time and up to 6 kg maximum payload under stated test conditions. It uses TB100 Intelligent Flight Batteries and the BS100 Intelligent Battery Station.
Technical Specifications
| Max Takeoff Weight (MTOM) | 15800 g |
| Max Flight Time | Up to 59 min (DJI stated test conditions) |
| Max Payload | Up to 6 kg (varies with altitude and battery level) |
| EU UAS Class | C3, C6 (C6 allows BVLOS under STS-02; parachute required) |
| Sound Power Level | 106 dB |
| Max Propeller Speed | 4050 RPM |
| Propeller | 2510F — 63.5×25.4 cm, 37.4 g each |
| Battery | TB100-20254-48.23 — 274×122×182 mm, 4720±20 g |
| Battery Station | BS100 Intelligent Battery Station |
| Remote Controller Battery | WB37 Intelligent Battery |
| Dual Gimbal Connector | M400 DGC — 158×320×115 mm, 231 g (optional) |
| Operator Modes | Dual Operator Mode supported |
| App | DJI Pilot 2 |
| Data Source | DJI Matrice 400 User Manual v2.0 + product listing (official) |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the drone. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Matrice 400 Parts Library
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsCompatible Power & Accessories
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.