The DJI Inspire 2 is a Inspire series DJI drone released in 2016, with 3440g, 1" (X4S) / 4/3" (X5S), 5.2K/30fps, 27 min, 7km, and Lightbridge 2 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Inspire series DJI drone, released 2016 |
| Flight profile | 3440g takeoff weight; 27 min flight time |
| Camera profile | 1" (X4S) / 4/3" (X5S); 5.2K/30fps video |
| Signal profile | Lightbridge 2; 7km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Inspire 2 is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Inspire 2, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Inspire 2. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
The DJI Inspire 2, released in 2016, is a professional-tier quadcopter from the Inspire series designed for high-end aerial imaging. It supports 5.2K/30fps video recording and features interchangeable cameras with 1-inch (X4S) and 4/3-inch (X5S) sensors. The system utilizes Lightbridge 2 transmission for a maximum range of 7 km.
| Flight time | 23-27 MINS |
| Speed | 94 KM/H |
| Max Takeoff Weight | 9.37lbs (4250 g) |
| GPS Hovering Accuracy | Vertical: ±1.64 feet (0.5 m) or ±0.33 feet (0.1 m, Downward Vision System enabled) |
| Max Ascent Speed | P-mode/A-mode: 16.4 ft/s (5 m/s) |
| Max Descent Speed | Vertical: 13.1 ft/s (4 m/s) |
| Max Wind Speed Resistance | 10 m/s |
| Max Flight Time | Approx. 27min (with Zenmuse X4S) |
| Indoor Hovering | Enabled by default |
| Operating Temperature | -4° to 104° F (-20° to 40° C) |
| Max Speed | 58 mph or 94 kph(Sport mode) |
| Max Controllable Speed | Pitch: 180°/s |
| Storage Temperature | Less than 3 months: -4° to 113° F (-20° to 45° C) |
| Net Weight | 515 g |
| Altitude Range | <32.8 feet (10 m) |
| Video resolution | 6K/5.2K |
| Sensory range | 30 M |
| Ultrasonic Sensor Operating Range | 0.33-16.4 feet (10-500 cm) |
| Ultrasonic Sensor Operating Environment | Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance) |
| Angular Vibration Range | ±0.01° |
| Controllable Range | Pitch: -130° to+40° |
| Mechanical Range | Pitch: -140° to+50° |
| Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
| Obstacle Sensing Range | 2.3-98.4 feet (0.7-30 m) |
| Live view | 1080 P |
| Operating Frequency | 2.400-2.483 GHz |
| Control range | 7 KM |
| Model | T650A |
| Max Angular Velocity | Pitch: 300°/s |
| Max Tilt Angle | P-mode: 35° (Forward Vision System enabled: 25°) |
| Max Takeoff Sea Level | 1.55 mi (2500 m) |
| Motor Model | DJI 3512 |
| Propeller Model | DJI 1550T |
| Diagonal Distance(propeller excluded) | 23.8 inch (605 mm, Landing Mode) |
| Interface Type | Detachable |
| Max Transmitting Distance(unobstructed, free of interference) | 2.4 GHz: |
| EIRP | 2.4 GHz: |
| Video Output Ports | USB, HDMI |
| Power Supply | Built-in battery |
| Charging | DJI charger |
| Dual User Capability | Host-and-Slave connection |
| Mobile Device Holder | Tablet or Smart Phone |
| Max Mobile Device Width | 170 mm |
| Battery | 6000mAh 2S LiPo |
| USB Supply Power | iOS: 1 A @ 5.2 V (Max); Android: 1.5 A @ 5.2 V (Max) |
| Voltage | 26.1 V |
| Rated Power | 180 W |
| Name | Intelligent Flight Battery |
| Velocity Range | <32.8 ft/s (10 m/s) at height of 6.56 feet (2 m) |
| Operating Range | <32.8 feet (10 m) |
| FOV | Horizontal: 60°; Vertical: 54° |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
13 serviceable parts in this zone.
3 serviceable parts in this zone.
1 serviceable parts in this zone.
2 serviceable parts in this zone.
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
