The DJI Mini SE is a Mini series DJI drone released in 2021, with 249g, 1/2.3” CMOS, 2.7K, 30 min, 4 km, and Wi-Fi connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Mini series DJI drone, released 2021 |
| Flight profile | 249g takeoff weight; 30 min flight time |
| Camera profile | 1/2.3” CMOS; 2.7K video |
| Signal profile | Wi-Fi; 4 km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Mini SE is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Mini SE, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Mini SE. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
Specification answer
Quick answer: DJI lists the Mini SE with up to 30 minutes of flight time in windless test conditions and Level 5 wind resistance, stated as 8.5-10.5 m/s. For pre-owned buying, the important checks are battery health, propeller condition, controller pairing, app compatibility, and whether the kit includes charger and spare propellers.
The DJI Mini SE is an entry-level drone from the Mini series, released in 2021. It weighs 249 grams, provides a maximum flight time of 30 minutes, and captures 2.7K video using a 1/2.3-inch CMOS sensor with Wi-Fi transmission.
| Takeoff Weight [1] | < 249 g |
| Dimensions | Folded: 138×81×58 mm (L×W×H) |
| Max Ascent Speed | 4 m/s (S Mode) |
| Max Descent Speed | 3 m/s (S Mode) |
| Max Speed (near sea level, no wind) | 13 m/s (S Mode) |
| Maximum Takeoff Altitude | 3000 m |
| Max Flight Time | 30 minutes (measured while flying at 17 kph in windless conditions) |
| Max Wind Speed Resistance | 8.5 m/s to 10.5m/s (Scale 5) |
| Max Pitch Angle | 30° (S Mode) 20° (P Mode) 20° (C Mode) |
| Operating Temperature Range | 0° to 40°C (32° to 104°F) |
| GNSS | GPS+GLONASS |
| Hovering Accuracy Range | Vertical: ±0.1 m (with Vision Positioning), ±0.5 m (with GPS Positioning) Horizontal: ±0.3 m (with Vision Positioning), ±1.5 m (with GPS Positioning) |
| Max Control Speed (tilt) | 120°/s |
| Shutter Speed | Electronic Shutter: 4-1/8000s |
| Net Weight | 82.5 g |
| Sensor | 1/2.3” CMOS |
| Lens | FOV: 83° |
| ISO Range | Video: 100-3200 (Auto)100-3200 (Manual) Photo: 100-3200 (Auto) 100-3200 (Manual) |
| Still Image Size | 4:3: 4000×3000 |
| Still Photography Modes | Single shot Interval: 2/3/5/7/10/15/20/30/60 s |
| Video Resolution | 2.7K：2720×1530 24/25/30 p |
| Max Video Bitrate | 40 Mbps |
| Supported File System | FAT32（≤32 GB） |
| Photo Format | JPEG |
| Video Format | MP4 (H.264/MPEG-4 AVC） |
| Max. Bitrate | 4 Mbps |
| Mechanical Range | Tilt: -110° to 35° Roll: -35° to 35° Pan: -20° to 20° |
| Controllable Range | Tilt: -90° to 0° (default setting) -90° to +20° (extended) |
| Stabilization | 3-axis (tilt, roll, pan) |
| Angular Vibration Range | ±0.01° |
| Downward | Operating Range: 0.5-10 m |
| Operating Environment | Non-reflective, discernable surfaces |
| Operating Frequency[2] | Model MT2SS5: 5.725-5.850 GHz |
| Transmission Power (EIRP) | Model MT2SS5 |
| Operating Frequency | Model MR1SS5: 5.725-5.850 GHz |
| Max Transmission Distance (unobstructed, free of interference) | Model MR1SS5 |
| Video Transmission System | Enhanced Wi-Fi |
| Live View Quality | 720p/30fps |
| Diagonal Distance | 213 mm |
| Max Angular Velocity | 150°/s (S Mode) |
| Operating Current/Voltage | 1200 mA 3.6 V (Android) |
| Supported USB Port Types | Lightning, Micro USB (Type-B), USB Type-C |
| Latency (depending on environmental conditions and mobile device) | 170-240 ms |
| Rated Power | 18 W |
| Voltage | 7.7 V |
| Name | DJI Fly |
| Required Operating System | iOS v10.0 or later Android v6.0 or later |
| Supported SD Cards | UHS-I Speed Class 3 or above is required. A list of reccomended microSD cards can be found below. |
| Footnotes | 1. The standard weight of the aircraft (including battery, propellers, and a microSD card) is 242 grams. Actual product weight may vary. Registration is not required in some countries and regions. Check local rules and regulations before use. These specifications have been determined through tests conducted with the latest firmware. Firmware updates can enhance performance, so updating to the latest firmware is highly recommended. |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
1 serviceable parts in this zone.
0 serviceable parts in this zone.
0 serviceable parts in this zone.
0 serviceable parts in this zone.
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
