The DJI Mini 3 is a Mini series DJI drone released in 2022, with 248 g, 1/1.3-inch CMOS, 4K/30fps, 38 min, 10.0km, and O2 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Mini series DJI drone, released 2022 |
| Flight profile | 248 g takeoff weight; 38 min flight time |
| Camera profile | 1/1.3-inch CMOS; 4K/30fps video |
| Signal profile | O2; 10.0km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Mini 3 is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Mini 3, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Mini 3. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
Identificeer de mislukte montage voordat u een Mini 3-onderdeel koopt. Leg het exacte model en serienummer, de zijkant en positie, het connectorpad, de revisie van het bord of de schaal, het foutbewijs, de impact- of vochtgeschiedenis vast en maak duidelijke foto's van het verwijderde onderdeel. Onderdelen met een vergelijkbare naam uit de Mini-serie kunnen nog steeds verschillen qua pasvorm, kalibratie of firmwaregedrag.
Gebruik deDJI-onderdelendatabasevoor assemblageterminologie en derepareer het inlaattrajectwanneer de klus betrekking heeft op het moederbord, de cardanische ophanging, sensoren, ESC, solderen of kalibratie in plaats van een gedocumenteerde externe vervanging.
The DJI Mini 3, released in 2022, is an entry-level quadcopter in DJI's Mini series designed for portability and accessibility. It features a 248 g takeoff weight and offers a maximum flight time of 38 minutes. The drone captures video at 4K/30fps and uses O2 transmission technology.
| Takeoff Weight | 248 g |
| Dimensions | Folded (without propellers): 148×90×62 mm (L×W×H) |
| Max Ascent Speed | 5 m/s |
| Max Descent Speed | 3.5 m/s |
| Max Horizontal Speed (at sea level, no wind) | 16 m/s |
| Max Takeoff Altitude | With Intelligent Flight Battery: 4000 m |
| Max Flight Time | 38 minutes (with Intelligent Flight Battery) |
| Max Hovering Time | 33 minutes (with Intelligent Flight Battery) |
| Max Flight Distance | 18 km (with Intelligent Flight Battery and measured while flying at 43.2 kph in windless conditions) |
| Max Wind Speed Resistance | 10.7 m/s (Level 5) |
| Max Pitch Angle | 40° |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + GLONASS + Galileo |
| Hovering Accuracy Range | Vertical: |
| Internal Storage | N/A |
| Class | C0 (EU) |
| Shutter Speed | Electronic Shutter: 2-1/8000 s |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | DJI O2: |
| Image Sensor | 1/1.3-inch CMOS |
| Lens | FOV: 82.1° |
| ISO Range | Video: |
| Max Image Size | 8064×6048 |
| Still Photography Modes | Single Shot: 12 MP |
| Photo Format | JPEG/DNG (RAW) |
| Video Resolution | 4K: 3840×2160@24/25/30 fps |
| Video Format | MP4 (H.264) |
| Max Video Bitrate | 100 Mbps |
| Supported File System | FAT32 (≤ 32 GB) |
| Color Mode | Normal |
| Digital Zoom | 4K: 2× |
| Stabilization | 3-axis mechanical gimbal (tilt, roll, and pan) |
| Mechanical Range | Tilt: -135° to 80° |
| Controllable Range | Tilt: -90° to 60° |
| Angular Vibration Range | ±0.01° |
| Sensing Type | Downward vision system |
| Downward | Precise Hovering Range: |
| Operating Environment | Downward: |
| Video Transmission System | DJI O2 |
| Live View Quality | Remote Controller: |
| Operating Frequency | 2.400-2.4835 GHz |
| Transmission Power (EIRP) | 2.400-2.4835 GHz: |
| Max Transmission Distance (free of interference) | FCC: 10 km |
| Max Transmission Distance (with interference) | Strong Interference: urban landscape, approx. 1.5-3 km |
| Lowest Latency | Approx. 200 ms |
| Antenna | 2 antennas, 1T2R |
| QuickShots Modes | Dronie, Helix, Rocket, Circle, and Boomerang |
| Compatible Batteries | DJI Mini 3 Pro Intelligent Flight Battery, DJI Mini 3 Pro Intelligent Flight Battery Plus* |
| Max Operating Time | DJI RC-N1 Remote Controller |
| Guaranteed software updates until | 2026/12/31 |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
3 serviceable parts in this zone.
5 serviceable parts in this zone.
1 serviceable parts in this zone.
3 serviceable parts in this zone.
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
