DJI Mini 4 Pro
Quick Answer
The DJI Mini 4 Pro is a Mini series DJI drone released in 2023, with <249 g, 1/1.3-inch CMOS, 4K/100fps slow motion, 34 min, 20 km FCC, and O4 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Mini 4 Pro Comparison Snapshot
| Model position | Mini series DJI drone, released 2023 |
| Flight profile | <249 g takeoff weight; 34 min flight time |
| Camera profile | 1/1.3-inch CMOS; 4K/100fps slow motion video |
| Signal profile | O4; 20 km FCC max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
DJI Mini 4 Pro FAQ
What is the DJI Mini 4 Pro best used for?
The DJI Mini 4 Pro is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Is the DJI Mini 4 Pro repairable?
Yes. Reboot Hub maps serviceable parts for the DJI Mini 4 Pro, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
How should I compare the DJI Mini 4 Pro with another DJI drone?
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Can I buy pre-owned DJI Mini 4 Pro parts from Reboot Hub?
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Mini 4 Pro. Match the exact model, part zone, and connector generation before ordering a replacement.
What should I check before buying a used DJI Mini 4 Pro?
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
Specification answer
What are the key DJI Mini 4 Pro specifications?
Quick answer: DJI lists the Mini 4 Pro as a sub-249 g mini drone with up to 34 minutes of flight time on the standard Intelligent Flight Battery, up to 45 minutes with Battery Plus where available, and 10.7 m/s maximum wind-speed resistance. Its core buying checks are battery type, controller bundle, camera/gimbal condition, and regional battery availability.
Primary source: DJI Mini 4 Pro specifications. Published figures do not establish the condition or included items of a pre-owned unit.
About the DJI Mini 4 Pro
DJI Mini 4 Pro is a 2023 Mini-series camera drone weighing under 249 g with its standard Intelligent Flight Battery. DJI lists a 1/1.3-inch CMOS sensor, 4K/60fps HDR video, omnidirectional obstacle sensing and up to 34 minutes of flight under its test conditions. Its 4K/100fps H.265 mode records slow-motion video. O4 transmission is rated up to 20 km under FCC rules only in an unobstructed, interference-free test; the optional Battery Plus raises takeoff weight above 249 g and is not sold in Europe.
Technical Specifications
| Takeoff Weight | < 249 g |
| Dimensions | Folded (without propellers): 148×94×64 mm (L×W×H) |
| Max Ascent Speed | 5 m/s (S Mode) |
| Max Descent Speed | 5 m/s (S Mode) |
| Max Horizontal Speed (at sea level, no wind) | 16 m/s (S Mode) |
| Max Takeoff Altitude | With DJI Mini 4 Pro Intelligent Flight Battery: 4000 m |
| Max Flight Time | 34 minutes (with Intelligent Flight Battery) |
| Max Hovering Time | 30 minutes (with Intelligent Flight Battery) |
| Max Flight Distance | 18 km (with Intelligent Flight Battery and measured while flying at 40.7 kph in a windless environment at 20 meters above sea level) |
| Max Wind Speed Resistance | 10.7 m/s |
| Max Pitch Angle | 35° |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + Galileo + BeiDou |
| Hovering Accuracy Range (windless or breezy) | Vertical: ±0.1 m with vision positioning, ±0.5 m with GNSS; horizontal: ±0.1 m with vision positioning, ±0.5 m with GNSS. |
| Internal Storage | 2 GB |
| Class | C0 (EU), with the option to apply for C1 (EU) in the DJI Fly app. |
| Shutter Speed | 12MP Photo: 1/16000-2 s (2.5-8 s for simulated long exposure) |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | O4: 10 MB/s with DJI RC-N2 or DJI RC 2; Wi-Fi 5: up to 30 MB/s under DJI's stated low-interference dual-band laboratory conditions with footage in internal storage. |
| Image Sensor | 1/1.3-inch CMOS, Effective Pixels: 48 MP |
| Lens | 24 mm equivalent, 82.1° FOV, f/1.7, focus 1 m–∞. |
| ISO Range | Video Normal/Slow Motion: ISO 100–6400 Normal or 100–1600 D-Log M/HLG; Night video: 100–12800 Normal; Photo: 12 MP 100–6400, 48 MP 100–3200. |
| Max Image Size | 8064×6048 |
| Still Photography Modes | Single Shot: 12 MP and 48 MP |
| Photo Format | JPEG/DNG (RAW) |
| Video Resolution | 4K 3840×2160 at 24/25/30/48/50/60/100fps; FHD 1920×1080 at 24/25/30/48/50/60/100/200fps. The 100/200fps modes record slow motion; 4K/100fps and HLG/D-Log M use H.265 only. |
| Video Format | MP4 (MPEG-4 AVC/H.264, HEVC/H.265) |
| Max Video Bitrate | H.264/H.265: 150 Mbps |
| Supported File System | exFAT |
| Color Mode and Sampling Method | Normal: 8-bit 4:2:0 (H.264/H.265); HLG/D-Log M: 10-bit 4:2:0 (H.265). |
| Digital Zoom | 12MP Photo: 1-3x |
| 3D Infrared Sensor | Measurement Range: 0.1-8 m (reflectivity > 10%) |
| Stabilization | 3-axis mechanical gimbal (tilt, roll, pan) |
| Mechanical Range | Tilt: -135° to 80° |
| Controllable Range | Tilt: -90° to 60° |
| Angular Vibration Range | ±0.01° |
| Sensing Type | Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft |
| Forward | Measurement Range: 0.5-18 m |
| Backward | Measurement Range: 0.5-15 m |
| Lateral | Measurement Range: 0.5-12 m |
| Upward | Measurement Range: 0.5-15 m |
| Downward | Measurement Range: 0.3-12 m |
| Operating Environment | Forward, backward, lateral and upward sensing: textured surfaces and light above 15 lux; downward sensing: textured, diffusely reflective surfaces above 20% reflectivity and light above 15 lux. |
| Video Transmission System | O4 |
| Live View Quality | Remote controller: up to 1080p/60fps in flight in photo or 60fps recording mode; up to 1080p/30fps in 30fps recording mode; up to 1080p/24fps on the ground before takeoff. |
| Operating Frequency | 2.4000-2.4835 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: <33 dBm FCC, <20 dBm CE/SRRC/MIC; 5.1 GHz: <23 dBm CE; 5.8 GHz: <33 dBm FCC, <30 dBm SRRC, <14 dBm CE. |
| Max Transmission Distance (unobstructed, free of interference) | FCC: 20 km |
| Max Transmission Distance (unobstructed, with interference) | FCC typical-condition test, unobstructed: strong urban interference approx. 1.5–4 km; medium suburban interference approx. 4–10 km; low-interference suburb/seaside approx. 10–20 km. These figures do not guarantee an actual flight distance. |
| Max Transmission Distance (obstructed, with interference) | FCC low-interference test with obstruction: buildings approx. 0–0.5 km; trees approx. 0.5–3 km. These figures do not guarantee an actual flight distance. |
| Lowest Latency | Aircraft + Remote Controller: approx. 120 ms |
| Antenna | 4 antennas, 2T4R |
| Video Transmission Operating Frequency | 2.4000-2.4835 GHz |
| Max Operating Time | Without charging any mobile device: 6 hours |
| Guaranteed software updates until | 2026/12/31 |
| Official detailed specs | https://www.dji.com/cn/mini-4-pro/specs (checked 2026-10-16) |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Mini 4 Pro Parts Library
External
6 serviceable parts in this zone.
Circuit Boards
1 serviceable parts in this zone.
Flex Cables
3 serviceable parts in this zone.
Gimbal
4 serviceable parts in this zone.
Compatible Power & Accessories
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Batteries & Power 4 options
Propellers & Flight Consumables 2 options
Mini research cluster
Research DJI Mini 4 Pro, then choose the right pre-owned path.
This page supports the research layer. Use the buying guide, live collection, and Reboot Hub trust pages to connect specs, compatibility, inspection evidence, warranty terms, and current inventory before choosing a unit.