DJI Mavic 3 Pro Cine
Quick Answer
The DJI Mavic 3 Pro Cine is a Mavic series DJI drone released in 2023, with 963 g, Hasselblad 4/3, 5.1K/50fps Apple ProRes, 43 min, 15km, and O3+ connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Mavic 3 Pro Cine Comparison Snapshot
| Model position | Mavic series DJI drone, released 2023 |
| Flight profile | 963 g takeoff weight; 43 min flight time |
| Camera profile | Hasselblad 4/3; 5.1K/50fps Apple ProRes video |
| Signal profile | O3+; 15km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
About the DJI Mavic 3 Pro Cine
DJI Mavic 3 Pro Cine is the 2023 triple-camera Cine variant, with 4/3 CMOS 20 MP Hasselblad, 70 mm medium tele and 166 mm tele cameras. DJI lists 963 g takeoff weight, 1 TB internal storage and Apple ProRes 422 HQ/422/422 LT recording across supported camera modes, including 5.1K up to 50 fps on the Hasselblad camera. Its 4K/120fps mode plays as slow motion. DJI rates up to 43 minutes of flight and O3+ transmission up to 15 km FCC or 8 km CE/SRRC/MIC in unobstructed, interference-free conditions.
Technical Specifications
| Weight | 963 g |
| Dimensions Folded | 231.1 x 98 x 95.4 mm |
| Dimensions Unfolded | 347.5 x 290.8 x 107.7 mm |
| Max Flight Time | 43 min |
| Max Speed | 21 m/s (75.6 km/h) |
| Max Transmission Distance | 15 km (FCC), 8 km (CE/SRRC) |
| Camera | Triple: Hasselblad 24mm f/2.8-f/11 + Med Tele 70mm f/2.8 + Tele 166mm f/3.4 |
| Sensor | 4/3 CMOS 20MP + 1/1.3" CMOS 48MP + 1/2" CMOS 12MP |
| Video Resolution | 5.1K @ 50fps; DCI 4K/4K @ 120fps; 4K @ 60fps (tele); 120fps modes play as slow-motion video |
| Video Formats | MP4/MOV H.264/H.265; MOV Apple ProRes 422 HQ, 422 and 422 LT (Cine only) |
| Photo Resolution | 5280x3956 (Hasselblad); 8064x6048 (Med Tele); 4000x3000 (Tele) |
| Battery Model | DJI Mavic 3 Intelligent Flight Battery |
| Battery Capacity | 5000 mAh / 77 Wh |
| Charging System | DJI 65W/100W charger; Charging Hub |
| GNSS | GPS + Galileo + BeiDou |
| Internal Storage | 1 TB |
| Obstacle Sensing | Omnidirectional binocular vision + bottom infrared |
| Remote Controller Compatibility | DJI RC-N1, DJI RC Pro, DJI RC |
| App | DJI Fly |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Mavic 3 Pro Cine Parts Library
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsCompatible Power & Accessories
Compatible batteries and accessories are being mapped from verified Reboot Hub inventory.