The DJI Air 2S is a Air series DJI drone released in 2021, with 595 g, 1-inch CMOS, 5.4K/30fps, 31 min, 12 km, and O3 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Air series DJI drone, released 2021 |
| Flight profile | 595 g takeoff weight; 31 min flight time |
| Camera profile | 1-inch CMOS; 5.4K/30fps video |
| Signal profile | O3; 12 km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Air 2S is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Air 2S, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Air 2S. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
The DJI Air 2S is a consumer drone in the Air series, released in 2021. It features a 1-inch CMOS sensor capable of 5.4K/30fps video and utilizes O3 transmission for a maximum range of 12 kilometers. The aircraft has a flight time of 31 minutes and weighs 595 grams.
| Takeoff Weight | 595 g |
| Dimensions | Folded: |
| Max Ascent Speed | 6 m/s (S Mode) |
| Max Descent Speed | 6 m/s (S Mode) |
| Max Flight Time (no wind) | 31 minutes |
| Max Hovering Time (no wind) | 30 minutes * |
| Max Flight Distance (no wind) | 18.5 km |
| Max Flight Speed (near sea level, no wind) | 19 m/s (S Mode) |
| Max Wind Speed Resistance | 10.7 m/s |
| Max Pitch Angle | 35° (S Mode) |
| Operating Temperature Range | 0° to 40°C (32° to 104°F) |
| Hovering Accuracy Range | Vertical: |
| GNSS | GPS+GLONASS+GALILEO |
| Internal Storage | 8 GB |
| Max Controllable Speed (tilt) | 100°/s |
| Operating Temperature | 0° to 40°C (32° to 104°F) |
| Sensor | 1" CMOS |
| Lens | FOV: 88° |
| ISO Range | Video: |
| Still Image Size | 20 MP |
| Still Photography Modes | Single shot: 20 MP |
| Video Resolution | 5.4K: 5472×3078 @ 24/25/30 fps |
| Max Video Bitrate | 150 Mbps |
| Supported File System | FAT32/exFAT |
| Digital Zoom | Zoom recording is not available while recording 10-bit videos and 120fps videos. |
| Max Transmission Bitrate | 44 Mbps (download bitrate) |
| Stabilization | 3-axis (tilt, roll, pan) |
| Mechanical Range | Tilt: -135° to 45° |
| Controllable Range | Tilt: -90° to 0°(default); -90° to 24° (extended) |
| Angular Vibration Range | ±0.01° |
| Forward | Precision Measurement Range: 0.38-23.8 m |
| Backward | Precision Measurement Range: 0.37-23.4 m |
| Downward | ToF Measurement Range: 0.1-8 m |
| Upward | Precision Measurement Range: 0.34-28.6 m |
| Downward Auxiliary Light | Single LED |
| Operating Frequency | 2.4 GHz |
| Transmission Power (EIRP) | 2.4 GHz: |
| Transmission System | O3 |
| Max Transmission Distance | 12 km (FCC), 8 km (CE) |
| Live View Quality/Latency | Drone + Remote Controller: 1080p/30fps 12 Mbps 120 ms |
| Remote Controller Transmission System | When used with different aircraft hardware configurations, DJI RC-N1 Remote Controllers will automatically select the corresponding firmware version for updating and support the following transmission technologies enabled by the hardware performance of the linked aircraft models: a. DJI Mini 2/ DJI Mavic Air 2: O2 b. DJI Air 2S: O3 c. DJI Mavic 3: O3+ |
| Transmitter Power (EIRP) | 2.400-2.4835 GHz: |
| Video Transmission System | DJI O3 |
| Wi-Fi Transmitter Power (EIRP) | 2.400-2.4835 GHz: < 23 dBm (FCC), < 20 dBm (CE/SRRC/MIC) |
| Bluetooth Protocol | Bluetooth 4.2 |
| Bluetooth Transmitter Power (EIRP) | 2.400-2.4835 GHz: < 10 dBm |
| Wi-Fi Protocol | 802.11 a/b/g/n |
| Diagonal Length | 302 mm |
| Max Service Ceiling Above Sea Level | 5000 m |
| Max Angular Velocity | 250°/s (S Mode) |
| Propellers | Quick release, low noise, folding |
| Aircraft Arms | Foldable |
| Compass | Single Compass |
| IMU | Single IMU |
| Voltage | 11.04 V / 11.55 V |
| Built-in Battery | N/A |
| Pan Axis | Pan：-80° to 80° |
| Left/Right | N/A |
| Multiple Controllers | N/A |
| DJI Smart Controller | Supported |
| Battery Life | 6 hours (4 hours when charging a mobile device) |
| Model | RM330 |
| Storage Capacity | DJI RC's storage capacity can be increased by using a microSD card. Users can store images and videos on the card and export them to a computer or other devices. |
| Video Output Port | N/A |
| Max Battery Life | Approx. 4 hours |
| Supported SD Cards | UHS-I Speed Class 3 or above is required. A list of recommended microSD cards can be found below. |
| Charging Input | 100-240V, 50/60 Hz, 1.3 A |
| Charging Output | Charging Port: 13.2 V⎓2.82 A |
| Rated Power | 38 W |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
6 serviceable parts in this zone.
3 serviceable parts in this zone.
1 serviceable parts in this zone.
0 serviceable parts in this zone.
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Air research cluster
This page supports the research layer. Use the buying guide, live collection, and Reboot Hub trust pages to connect specs, compatibility, inspection evidence, warranty terms, and current inventory before choosing a unit.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
