正確な状態を記載
製品ページは、状態、目に見える詳細、付属品、およびモデル固有の互換性に関する注意に関する真実の情報源です。
コンディションガイド



受取状況を読み込めませんでした
チェックアウト後、Reboot Hub は正確な注文を確認し、実際の商品をリストと照合し、該当する場合は証拠を文書化し、梱包ビデオを記録し、追跡を共有します。 【2】ご注文と納品のタイミング
Reboot Hub を選ぶ理由
中古 の国際的な購入を難しくする質問を減らします。商品が何であるか、外観、何が含まれているか、何をチェックしたか、誰が梱包したかなどです。
製品ページは、状態、目に見える詳細、付属品、およびモデル固有の互換性に関する注意に関する真実の情報源です。
コンディションガイド対象となる 中古 製品には、製品ページに示されている保証条件が含まれていますが、除外事項は明確に記載されています。
ポリシーの表示当社の技術的背景は、発送前の実際の検査、修理リスクの検討、互換性チェックをサポートします。
当社の認証私たちはこれらの注文をドロップシッピングしません。私たち自身のチームが商品をレビューし、保護を準備し、梱包し、発送を記録します。
当社の基準梱包証明
この実際の梱包記録は、Reboot Hub が高額の RC Pro 2 注文をどのように処理するかを示しています。同じ慎重なプロセスが当社の機器全体に適用されます。リストのレビュー、適切な追加保護、緩衝材、最終シール、追跡可能な発送です。
製品の証拠
注文の背後にある正確な単位、記録された状態、証拠と保護を理解します。
検査報告書内の写真は、再利用サンプル品ではなく、ご注文に応じて準備された実際のユニットを示しています。 【3】状態・点検記録
状態グレードと検査記録は、承認され発送の準備ができているものと同じユニットを示しています。
供給されるユニットについて、利用可能な機能のチェック、診断結果、注意事項、およびサポートビデオが公開されています。
梱包記録には、承認された商品が発送前にこの注文に対してどのように保護され、緩衝され、密封されているかが文書化されています。
発送追跡は発送後に共有されるため、配達記録は確認された注文に関連付けられたままになります。
正確な製品情報
選択した製品ページ、バリエーション、および書面による確認は、状態、互換性、付属品、および保証条件についての信頼できる情報源となります。
発送前に、選択されたモデル、コントローラー、バッテリー、充電器、およびアクセサリーの世代に対して互換性がチェックされます。
コア機能は、このページで選択した製品タイプと正確な構成に対してチェックされます。
DJI MAVIC AIR · SPARE PART FIT CHECK
Central OEM-pulled electronics assembly for the first-generation DJI Mavic Air. Match both board sides, connector layout, shielding and hardware revision to the listing photographs before ordering.
Fits
DJI Mavic Air (1st gen)Not Mavic Air 2 or Air 2S.Match
PCB revision, connectors and shieldingCompare both listing photographs.Includes
1 × MotherboardFront and reverse views show the same component.Condition
OEM-pulledInspect the exact item photos.製品の互換性について
| アイテム | ステータス 【4】知っておきたいこと | 知っておくべきこと |
|---|---|---|
| Compatible aircraft | Compatible | DJI Mavic Air (first generation) only. It is not for DJI Mavic Air 2 or DJI Air 2S. |
| Hardware match | Exact match required | Compare both PCB sides, printed identifiers, shields, heat-sink profile, connectors, contacts and mounting holes. |
| Repair scope | Diagnosis required | Confirm the motherboard is the failed component and note that connected-system calibration or firmware service may be required after installation. |
選択されたパッケージ = 真実の情報源
One OEM-pulled DJI Mavic Air motherboard in the configuration shown. Both photos show the same board from opposite sides. ESC board, GPS board, fan, loose cables, screws, tools and unrelated assemblies are excluded unless expressly named.
選択したバリアント、その画像、および Reboot Hub 検査記録により、正確な付属品が決まります。
Match the first-generation DJI Mavic Air and compare both sides of the original motherboard with the listing photos.
Check pins, contacts, shields, mounting holes and attached pieces before installation.
Use ESD-safe handling, correct tools and a documented repair procedure. Do not force the board or connectors.
After reassembly, verify affected systems and complete required firmware service or calibration before operational use.
Stop and re-check the aircraft generation, hardware revision, connector orientation, shielding and mounting points.
Power down, inspect every related connector and cable, and verify the diagnosis before judging the replacement part.
Record the exact warning, power down safely and follow the model-specific firmware and calibration path.
Stop work to prevent secondary damage and document the connector and mounting area before seeking technical support.
文書化された製品証拠
製品に関するご質問
部品と機器の正確なフィット感
部品、コントローラー、カメラ、ジンバル、アクセサリについては、Reboot Hub が注文に利用可能な情報と照らし合わせて、正確な品目、部品の同一性、目に見える状態、および既知の互換性をチェックします。コンポーネントがモデルまたはリビジョン固有である場合は、支払い前に適合性を確認するよう依頼してください。
ガイド、サポート、学習
Use the Reboot Hub model reference for compatibility checks, parts context and repair planning.
ガイドを読む
Use a controlled aircraft, battery, propeller, controller and environment check before flight.
ガイドを読む