بعد الخروج، يؤكد Reboot Hub الطلب الدقيق، ويفحص العنصر الفعلي مقابل القائمة، ويثبت المستندات حيثما أمكن، ويسجل فيديو التعبئة، ويتتبع الأسهم.

الموافقة عبر البريد الإلكترونينرسل لك العنصر المحدد والتكوين المحدد عبر البريد الإلكتروني للتأكيد.
من 1 إلى 5 أيام عمليبدأ الإعداد والإرسال بعد الرد على تفاصيل الطلب والموافقة عليها.
14-21 يومًا دوليًاتصل بعض الطرق في غضون 10 أيام تقريبًا، لكن أوقات التسليم تقديرية وليست مضمونة.
  1. 01تأكيد الطلب
  2. 02مراجعة السلعة
  3. 03إثبات مشترك
  4. 04فيديو التعبئة
  5. 05تم إرسال التتبع

لماذاReboot Hub

البينة قبل الوعود.

نقوم بتقليل الأسئلة التي تجعل عمليات شراء مستعمل الدولية صعبة: ما هي السلعة، وكيف تبدو، وما الذي تم تضمينه، وما الذي تم فحصه، ومن قام بتعبئته.

01

الحالة الدقيقة مدرجة

صفحة المنتج هي مصدر الحقيقة فيما يتعلق بالحالة والتفاصيل المرئية والعناصر المضمنة وملاحظات التوافق الخاصة بالطراز.

دليل الحالة
02

ضمان 180 يومًا

تشتمل منتجات مستعمل المؤهلة على شروط الضمان الموضحة في صفحة المنتج، مع ذكر الاستثناءات بوضوح.

عرض السياسة
03

فريق معتمد من MOHRSS

تدعم خلفيتنا الفنية الفحص العملي ومراجعة مخاطر الإصلاح وفحوصات التوافق قبل الإرسال.

شهاداتنا
04

تم التعامل معه بواسطة Reboot Hub

نحن لا نقوم بإسقاط هذه الطلبات. يقوم فريقنا الخاص بمراجعة العنصر وإعداد الحماية وتعبئته وتسجيل الإرسال.

معيارنا

دليل التعبئة

تم فحصها وحمايتها وتبطينها وختمها من قبل فريقنا.

يوضح سجل التعبئة الحقيقي هذا كيفية تعامل Reboot Hub مع طلب RC Pro 2 عالي القيمة. تنطبق نفس العملية الدقيقة على جميع معداتنا: مراجعة القائمة، والحماية الإضافية المناسبة، والتوسيد، والختم النهائي، والإرسال الذي يمكن تتبعه.

  • تم فحص العنصر الفعلي مقابل الطلب
  • تمت مراجعة الملحقات ومحتويات العبوة
  • تم تحديد الحماية للمعدات والطريق
  • تم الاحتفاظ بأدلة التعبئة قبل الإرسال

دليل المنتج

الشفافية الكاملة، من الفحص إلى التسليم.

فهم الوحدة الدقيقة والحالة المسجلة والأدلة والحماية وراء طلبك.

01 صور تقرير التفتيش الوحدة الفعلية

تُظهر الصور الموجودة داخل تقرير الفحص الوحدة الفعلية التي تم إعدادها لطلبك، بدلاً من عينة منتج مُعاد استخدامها.

02 سجل الحالة والفحص نفس الوحدة

تصف درجة الحالة وسجل الفحص نفس الوحدة المعتمدة والجاهزة للإرسال.

03 الأدلة الوظيفية والتشخيصية الشفافية الكاملة

تم الكشف عن فحوصات الوظائف المتوفرة ونتائج التشخيص والملاحظات والفيديو الداعم للوحدة التي يتم توفيرها.

04 فيديو التعبئة سجل التعبئة الكامل

يوثق سجل التعبئة كيفية حماية العنصر المعتمد وتوسيده وإغلاقه لهذا الطلب قبل الإرسال.

05 سجل التتبع والإرسال التسليم الذي يمكن تتبعه

تتم مشاركة تتبع الشحنة بعد الإرسال بحيث يظل سجل التسليم متصلاً بالطلب المؤكد.

انظر كيف يبدو الدليل على مستوى العنصر

معلومات المنتج الدقيقة

معرفة السلعة قبل شحنها.

تظل صفحة المنتج المحدد والمتغير والتأكيد المكتوب مصدر الحقيقة فيما يتعلق بالحالة والتوافق والعناصر المضمنة وشروط الضمان.

تمت الموافقة على الحالة
يتم فحص حالة المنتج المحدد والمعدات المضمنة وفقًا لهذه القائمة قبل الإرسال.
حقائق سريعة والتوافق

يتم التحقق من التوافق وفقًا للطراز ووحدة التحكم والبطارية والشاحن والملحقات المحددة قبل الإرسال.

وظيفة المنتج

Replacement flat cable for DJI Phantom 4 Pro V2.0 remote controller.

ماذا يوجد في الصندوق؟
المتغير المحدد هو المصدر الحقيقي للجهاز ووحدة التحكم والبطاريات والشاحن والعلبة والملحقات المضمنة. يؤكد Reboot Hub الطرد الدقيق قبل الإرسال.

DJI Phantom 4 Pro V2.0 Remote Controller Flat Cable Pack - OEM-pulled · PRODUCT KNOWLEDGE

DJI Phantom 4 Pro V2.0 Remote Controller Flat Cable Pack - OEM-pulled, clearly explained

Product summary: DJI Phantom 4 Pro V2.0 Remote Controller Flat Cable Pack - OEM-pulled from Reboot Hub. This flat cable pack is designed for the DJI Phantom 4 Pro V2.0 remote controller, featuring a flexible ribbon cable with precise connectors. It ensures reliable electrical connections for the controller's internal components.

Product category

Spare PartsCurrent Shopify product classification.

Listing condition

As listedExact condition and cosmetic grade are governed by this listing and selected variant.

Available selection

Single listed configurationThe selected variant and listing photographs control included items.

Core function

Replacement flat cable for DJI Phantom 4 Pro V2.0 remote controller.Based on the current product listing.

Inspection focus

Condition, core function, compatibility and included piecesReboot Hub review scope before dispatch.

Written coverage

Listing-specific written termsCheck the warranty, shipping and return terms shown on this listing before purchase.

فحص المشتري الدولي

الاستخدام والتوافق الدولي

قبل الطلب، تحقق من إصدار الطراز ومتطلبات راديو الوجهة والتنشيط وقواعد الطيران المحلية.

اقرأ دليل توافق المنطقة DJI

توافق المنتج

التوافق مع DJI Phantom 4 Pro V2.0 حزمة كابل مسطح لوحدة التحكم عن بعد - OEM-pulled

البندالحالةما يجب معرفته
Exact host model Exact match required Match DJI Phantom 4 Pro V2.0 Remote Controller Flat Cable Pack to the full donor and host model, generation and part number before ordering.
Hardware revision and position Confirm Compare both connector ends, latch style, cable length, routing and position with the original part and listing photographs.
Installation scope and included pieces Listing-specific Confirm whether the listing includes only the named component or also attached cables, fasteners, seals and other hardware shown in its photographs.
Connector ends and pin layout Exact match required Match both ends, orientation and contact layout to the original cable; connector fit alone is insufficient.
Cable route and host modules Confirm Confirm the controller model, board generation and cable routing shown by the removed component.
Included cable or attached parts Listing-specific Check the exact photographed cable, latches, foam or attached hardware before ordering.

الحزمة المختارة = مصدر الحقيقة

ماذا تعني الحزمة الخاصة بك

01

Exact listed item

The selected variant, its photographs and Reboot Hub written confirmation determine the exact included pieces.

يحدد المتغير المحدد وصوره وسجل فحص Reboot Hub القطع المضمنة بالضبط.

الرحلة الأولىقائمة التحقق من الإعداد
  1. 01

    Confirm the exact host and part position

    Match DJI Phantom 4 Pro V2.0 Remote Controller Flat Cable Pack, its side and hardware revision to the original component before disassembly.

  2. 02

    Inspect both connectors and the cable path

    Compare pin layout, latch style, length and routing with the removed cable and listing photographs.

  3. 03

    Install with power removed

    Follow the model-specific service path and ESD precautions; do not force a connector that differs.

  4. 04

    Test the affected connection

    Verify the connected function with a controlled diagnostic check before operational use.

إجابات سريعةاستكشاف الأخطاء وإصلاحها
  • FITMENT

    A connector will not seat

    Stop and compare both ends, orientation and hardware revision; do not force the latch.

  • ROUTING

    The cable is too short or follows a different path

    Confirm the original route and component generation before installation.

  • FUNCTION

    The connected function remains unavailable

    Inspect the cable and both host connectors; diagnose the system before blaming the replacement cable.

  • DAMAGE

    The cable or contact is damaged

    Power down and document the affected connector and cable before further work.

أدلة المنتج الموثقة

مرجع المنتج الكامل

أسئلة المنتج

إجابات مفيدة قبل الخروج

What exactly is included with DJI Phantom 4 Pro V2.0 Remote Controller Flat Cable Pack - OEM-pulled?
The selected variant, listing photographs and written confirmation define the exact named component and attached pieces. A complete controller, aircraft or battery is included only if this listing expressly says so.
What does Reboot Hub check on DJI Phantom 4 Pro V2.0 Remote Controller Flat Cable Pack - OEM-pulled?
Reboot Hub reviews visible component condition, connector or mounting identity, fitment risk and listed package contents before dispatch. Evidence is supplied where applicable.
How should I confirm DJI Phantom 4 Pro V2.0 Remote Controller Flat Cable Pack - OEM-pulled compatibility?
Confirm the exact controller model, assembly location, hardware revision, side and connector or mounting profile against the original part and listing photographs.
What condition is this DJI Phantom 4 Pro V2.0 Remote Controller Flat Cable Pack - OEM-pulled?
This is an OEM-pulled component. The selected variant, photographs and written terms govern its exact condition and included pieces.
Will I receive proof and tracking before shipment?
After checkout, Reboot Hub confirms the exact order. Where applicable, it shares actual-item or function evidence, records packing video and provides shipment tracking.
معيار المحتوىملخص المصدر الرسمي، تم تنظيمه بشكل مستقل بواسطة Reboot Hub.

Organized from this product listing, its cited DJI documentation, selected variant data and Reboot Hub inspection records. The selected variant, listing photographs and written confirmation remain the source of truth for condition and included items.

تمت مراجعة المحتوى: 24 August 2026

فريق حقيقي وراء الإدراج

قم بزيارة موقعناReboot Hubمحل

تدعم Reboot Hub المشترين في جميع أنحاء العالم من خلال معدات مستعمل التي تم فحصها، وقطع غيار OEM-pulled الأصلية، وفحوصات التوافق الخاصة بالطراز، والمصادر الدقيقة، ودعم ما بعد البيع المدعوم بالإصلاح.

يوفر مكتب الخدمة لدينا للمشترين الدوليين فريقًا حقيقيًا للاتصال به قبل الإرسال، وليس قائمة سوق مجهولة.

Reboot Hub Service Desk - Shenzhen
H1370, 1/F Building A, Manha Commercial Centre
Huaqiangbei Street, Futian District
من الاثنين إلى الأحد 11:00 صباحًا - 7:00 مساءً
فريق خدمة Reboot Hub في Shenzhen

ملاءمة الأجزاء والمعدات تمامًا

قم بمطابقة الجزء والواجهة والحالة قبل الطلب.

بالنسبة للأجزاء وأجهزة التحكم والكاميرات والمحورين والملحقات، تقوم Reboot Hub بالتحقق من العنصر الدقيق وهوية الجزء والحالة المرئية والتوافق المعروف مقابل المعلومات المتاحة للطلب. اطلب منا التحقق من الملاءمة قبل الدفع عندما يكون أحد المكونات خاصًا بالطراز أو المراجعة.

الأدلة والدعم والتعلم

إرشادات عملية لـ DJI Phantom 4 Pro V2.0 حزمة كابل مسطح لوحدة التحكم عن بعد - OEM-pulled، تتجاوز تفاصيل الإعلان.

استخدم أدلة مركزة لمقارنات النماذج وقرارات ما قبل الرحلة والعناية بالبطارية. صفحة المنتج تثبت السلعة؛ تساعدك هذه الموارد على امتلاكها والطيران بها بشكل جيد.