بعد الخروج، يؤكد Reboot Hub الطلب الدقيق، ويفحص العنصر الفعلي مقابل القائمة، ويثبت المستندات حيثما أمكن، ويسجل فيديو التعبئة، ويتتبع الأسهم.

الموافقة عبر البريد الإلكترونينرسل لك العنصر المحدد والتكوين المحدد عبر البريد الإلكتروني للتأكيد.
من 1 إلى 5 أيام عمليبدأ الإعداد والإرسال بعد الرد على تفاصيل الطلب والموافقة عليها.
14-21 يومًا دوليًاتصل بعض الطرق في غضون 10 أيام تقريبًا، لكن أوقات التسليم تقديرية وليست مضمونة.
  1. 01تأكيد الطلب
  2. 02مراجعة السلعة
  3. 03إثبات مشترك
  4. 04فيديو التعبئة
  5. 05تم إرسال التتبع

لماذاReboot Hub

البينة قبل الوعود.

نقوم بتقليل الأسئلة التي تجعل عمليات شراء مستعمل الدولية صعبة: ما هي السلعة، وكيف تبدو، وما الذي تم تضمينه، وما الذي تم فحصه، ومن قام بتعبئته.

01

الحالة الدقيقة مدرجة

صفحة المنتج هي مصدر الحقيقة فيما يتعلق بالحالة والتفاصيل المرئية والعناصر المضمنة وملاحظات التوافق الخاصة بالطراز.

دليل الحالة
02

ضمان 180 يومًا

تشتمل منتجات مستعمل المؤهلة على شروط الضمان الموضحة في صفحة المنتج، مع ذكر الاستثناءات بوضوح.

عرض السياسة
03

فريق معتمد من MOHRSS

تدعم خلفيتنا الفنية الفحص العملي ومراجعة مخاطر الإصلاح وفحوصات التوافق قبل الإرسال.

شهاداتنا
04

تم التعامل معه بواسطة Reboot Hub

نحن لا نقوم بإسقاط هذه الطلبات. يقوم فريقنا الخاص بمراجعة العنصر وإعداد الحماية وتعبئته وتسجيل الإرسال.

معيارنا

دليل التعبئة

تم فحصها وحمايتها وتبطينها وختمها من قبل فريقنا.

يوضح سجل التعبئة الحقيقي هذا كيفية تعامل Reboot Hub مع طلب RC Pro 2 عالي القيمة. تنطبق نفس العملية الدقيقة على جميع معداتنا: مراجعة القائمة، والحماية الإضافية المناسبة، والتوسيد، والختم النهائي، والإرسال الذي يمكن تتبعه.

  • تم فحص العنصر الفعلي مقابل الطلب
  • تمت مراجعة الملحقات ومحتويات العبوة
  • تم تحديد الحماية للمعدات والطريق
  • تم الاحتفاظ بأدلة التعبئة قبل الإرسال

دليل المنتج

الشفافية الكاملة، من الفحص إلى التسليم.

فهم الوحدة الدقيقة والحالة المسجلة والأدلة والحماية وراء طلبك.

01 صور تقرير التفتيش الوحدة الفعلية

تُظهر الصور الموجودة داخل تقرير الفحص الوحدة الفعلية التي تم إعدادها لطلبك، بدلاً من عينة منتج مُعاد استخدامها.

02 سجل الحالة والفحص نفس الوحدة

تصف درجة الحالة وسجل الفحص نفس الوحدة المعتمدة والجاهزة للإرسال.

03 الأدلة الوظيفية والتشخيصية الشفافية الكاملة

تم الكشف عن فحوصات الوظائف المتوفرة ونتائج التشخيص والملاحظات والفيديو الداعم للوحدة التي يتم توفيرها.

04 فيديو التعبئة سجل التعبئة الكامل

يوثق سجل التعبئة كيفية حماية العنصر المعتمد وتوسيده وإغلاقه لهذا الطلب قبل الإرسال.

05 سجل التتبع والإرسال التسليم الذي يمكن تتبعه

تتم مشاركة تتبع الشحنة بعد الإرسال بحيث يظل سجل التسليم متصلاً بالطلب المؤكد.

انظر كيف يبدو الدليل على مستوى العنصر

معلومات المنتج الدقيقة

معرفة السلعة قبل شحنها.

تظل صفحة المنتج المحدد والمتغير والتأكيد المكتوب مصدر الحقيقة فيما يتعلق بالحالة والتوافق والعناصر المضمنة وشروط الضمان.

تمت الموافقة على الحالة
يتم فحص حالة المنتج المحدد والمعدات المضمنة وفقًا لهذه القائمة قبل الإرسال.
حقائق سريعة والتوافق

يتم التحقق من التوافق وفقًا للطراز ووحدة التحكم والبطارية والشاحن والملحقات المحددة قبل الإرسال.

وظيفة المنتج

Main board for DJI Phantom 4 Pro V2.0 remote controller functionality.

ماذا يوجد في الصندوق؟
المتغير المحدد هو المصدر الحقيقي للجهاز ووحدة التحكم والبطاريات والشاحن والعلبة والملحقات المضمنة. يؤكد Reboot Hub الطرد الدقيق قبل الإرسال.

DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen) - OEM-pulled · PRODUCT KNOWLEDGE

DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen) - OEM-pulled, clearly explained

Product summary: DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen) - OEM-pulled from Reboot Hub. This main board is the core component of the DJI Phantom 4 Pro V2.0 GL300L remote controller, housing essential electronics for signal processing and control. It features multiple connectors for antennas, buttons, and other peripherals, ensuring seamless communication between the controller and the drone.

Product category

Spare PartsCurrent Shopify product classification.

Listing condition

As listedExact condition and cosmetic grade are governed by this listing and selected variant.

Available selection

Single listed configurationThe selected variant and listing photographs control included items.

Core function

Main board for DJI Phantom 4 Pro V2.0 remote controller functionality.Based on the current product listing.

Inspection focus

Condition, core function, compatibility and included piecesReboot Hub review scope before dispatch.

Written coverage

Listing-specific written termsCheck the warranty, shipping and return terms shown on this listing before purchase.

فحص المشتري الدولي

الاستخدام والتوافق الدولي

قبل الطلب، تحقق من إصدار الطراز ومتطلبات راديو الوجهة والتنشيط وقواعد الطيران المحلية.

اقرأ دليل توافق المنطقة DJI

توافق المنتج

التوافق مع DJI Phantom 4 Pro V2.0 GL300L اللوحة الرئيسية لجهاز التحكم عن بعد (بدون شاشة مدمجة) - OEM-pulled

البندالحالةما يجب معرفته
Exact host model Exact match required Match DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen) to the full donor and host model, generation and part number before ordering.
Hardware revision and position Confirm Compare board markings, connector count and orientation, mounting holes and left/right position with the original board and listing photographs.
Installation scope and included pieces Listing-specific Confirm whether the listing includes only the named component or also attached cables, fasteners, seals and other hardware shown in its photographs.
Exact board revision Exact match required Confirm the controller model, PCB markings and hardware revision before ordering.
Connector and mounting layout Confirm Match every socket, pin orientation, shield and mounting point; appearance alone does not prove fit.
Service and included pieces Listing-specific Confirm attached cables and hardware from this listing; use qualified diagnostics for an electrical fault.

الحزمة المختارة = مصدر الحقيقة

ماذا تعني الحزمة الخاصة بك

01

Exact listed item

The selected variant, its photographs and Reboot Hub written confirmation determine the exact included pieces.

يحدد المتغير المحدد وصوره وسجل فحص Reboot Hub القطع المضمنة بالضبط.

الرحلة الأولىقائمة التحقق من الإعداد
  1. 01

    Confirm the exact host and part position

    Match DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen), its side and hardware revision to the original component before disassembly.

  2. 02

    Inspect the board revision

    Compare markings, connectors, mounting holes and visible condition against the removed board.

  3. 03

    Install with power removed

    Use the model-specific service path and ESD precautions; qualified board-level service may be required.

  4. 04

    Test the affected electrical function

    Run controlled diagnostics and any documented service check before operational use.

إجابات سريعةاستكشاف الأخطاء وإصلاحها
  • FITMENT

    The board will not align

    Stop and compare board revision, connector positions and mounting holes with the original.

  • CONNECTOR

    A socket or cable differs

    Do not force the connection; verify the exact board and host module generation.

  • FUNCTION

    The electrical fault persists

    Check connected cables and components and run qualified diagnostics before condemning the board.

  • DAMAGE

    The board or surrounding assembly is damaged

    Power down and document the condition before seeking technical support.

أدلة المنتج الموثقة

مرجع المنتج الكامل

أسئلة المنتج

إجابات مفيدة قبل الخروج

What exactly is included with DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen) - OEM-pulled?
The selected variant, listing photographs and written confirmation define the exact named component and attached pieces. A complete controller, aircraft or battery is included only if this listing expressly says so.
What does Reboot Hub check on DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen) - OEM-pulled?
Reboot Hub reviews visible component condition, connector or mounting identity, fitment risk and listed package contents before dispatch. Evidence is supplied where applicable.
How should I confirm DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen) - OEM-pulled compatibility?
Confirm the exact controller model, assembly location, hardware revision, side and connector or mounting profile against the original part and listing photographs.
What condition is this DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen) - OEM-pulled?
This is an OEM-pulled component. The selected variant, photographs and written terms govern its exact condition and included pieces.
Will I receive proof and tracking before shipment?
After checkout, Reboot Hub confirms the exact order. Where applicable, it shares actual-item or function evidence, records packing video and provides shipment tracking.
معيار المحتوىملخص المصدر الرسمي، تم تنظيمه بشكل مستقل بواسطة Reboot Hub.

Organized from this product listing, its cited DJI documentation, selected variant data and Reboot Hub inspection records. The selected variant, listing photographs and written confirmation remain the source of truth for condition and included items.

تمت مراجعة المحتوى: 24 August 2026

فريق حقيقي وراء الإدراج

قم بزيارة موقعناReboot Hubمحل

تدعم Reboot Hub المشترين في جميع أنحاء العالم من خلال معدات مستعمل التي تم فحصها، وقطع غيار OEM-pulled الأصلية، وفحوصات التوافق الخاصة بالطراز، والمصادر الدقيقة، ودعم ما بعد البيع المدعوم بالإصلاح.

يوفر مكتب الخدمة لدينا للمشترين الدوليين فريقًا حقيقيًا للاتصال به قبل الإرسال، وليس قائمة سوق مجهولة.

Reboot Hub Service Desk - Shenzhen
H1370, 1/F Building A, Manha Commercial Centre
Huaqiangbei Street, Futian District
من الاثنين إلى الأحد 11:00 صباحًا - 7:00 مساءً
فريق خدمة Reboot Hub في Shenzhen

ملاءمة الأجزاء والمعدات تمامًا

قم بمطابقة الجزء والواجهة والحالة قبل الطلب.

بالنسبة للأجزاء وأجهزة التحكم والكاميرات والمحورين والملحقات، تقوم Reboot Hub بالتحقق من العنصر الدقيق وهوية الجزء والحالة المرئية والتوافق المعروف مقابل المعلومات المتاحة للطلب. اطلب منا التحقق من الملاءمة قبل الدفع عندما يكون أحد المكونات خاصًا بالطراز أو المراجعة.

الأدلة والدعم والتعلم

إرشادات عملية لـ DJI Phantom 4 Pro V2.0 GL300L اللوحة الرئيسية لجهاز التحكم عن بعد (بدون شاشة مدمجة) - OEM-pulled، تتجاوز تفاصيل الإعلان.

استخدم أدلة مركزة لمقارنات النماذج وقرارات ما قبل الرحلة والعناية بالبطارية. صفحة المنتج تثبت السلعة؛ تساعدك هذه الموارد على امتلاكها والطيران بها بشكل جيد.