DJI Air 3S Gimbal Vibration Absorbing Board - OEM-pulled

DJI Air 3S Gimbal Vibration Absorbing Board - OEM-pulled

Cena regularna $34.68
Cena regularna $34.68 Cena sprzedaży
OSZCZĘDŹ Wyprzedane
StanOryginalna część OEM-pulled
Gwarancja180-dniowa ograniczona gwarancja na części. Zobacz warunki
Dostawa DDP Brak ceł importowych należnych od kwalifikujących się zamówień.
Wyjaśnienie dostarczania DDP

W przypadku kwalifikujących się zamówień do użytku osobistego i miejsc docelowych pokazanych przy kasie Reboot Hub organizuje dostawę w formacie DDP. Obowiązujące cła importowe i podatki są uwzględniane przy kasie lub obsługiwane w ramach naszej umowy dostawy, chyba że kasa lub pisemne potwierdzenie stanowią inaczej.

Patrz Polityka wysyłkowa, punkt 6
Wysyłka za 28.88 USD poniżej 99 USD Bezpłatna standardowa wysyłka obowiązuje od 99 USD. Ostateczne opcje dostawy są wyświetlane przy kasie.

DJI Air 3S Gimbal Vibration Absorbing Board - OEM-pulled. This is the photographed gimbal damping board for an exact Air 3S repair.

What does the DJI Air 3S Gimbal Vibration Absorbing Board do?

This part is part of the gimbal mounting and vibration isolation: it holds the gimbal to the airframe and filters motor vibration out of the footage. For reference, the DJI Air 3S (2024) has a 1-inch 50 MP + 1/1.3-inch 48 MP camera and records video up to 4K/120fps. The listing shows 5 original photographs of this exact part.

Common reasons owners replace it

  • Jello effect or fine vibration visible in video
  • A torn rubber damper or broken mounting bracket
  • A gimbal that sits crooked in its mount after a crash

Related DJI Air 3S parts

See all DJI Air 3S parts. The DJI Air 3S repair guide covers teardown order and checks.

Fitment: Match the board outline, mounting points, damping interfaces and attached hardware to the removed original before ordering.

Included: One OEM-pulled board in the photographed configuration. Aircraft, tools, screws and unrelated gimbal parts are not included unless shown.

Condition: Removed original part; inspect the gallery for the exact configuration and cosmetic condition.

How do I confirm fitment?

This Gimbal Vibration Absorbing Board is listed specifically for the DJI Air 3S. Compare the outline, connector layout, mounting points and printed markings shown in the gallery with the removed original before ordering; visually similar parts from other DJI aircraft can use different connectors or mounting geometry.

What is included?

The listing includes one photographed Gimbal Vibration Absorbing Board in OEM-pulled condition. Aircraft, tools, screws, adhesive and connected assemblies are excluded unless they are clearly shown. Diagnose the failed component before installation and use a qualified repair technician when the repair requires internal disassembly.

OEM-pulled DJI Air 3S Gimbal Vibration Absorbing Board on white with Reboot Hub watermark overlay — view 1

DJI Air 3S Gimbal Vibration Absorbing Board - OEM-pulled

Cena regularna $34.68
Cena regularna $34.68 Cena sprzedaży
OSZCZĘDŹ Wyprzedane
Pokaż kompletne dane

DOKŁADNE DOPASOWANIE CZĘŚCI I WYPOSAŻENIA

Przed złożeniem zamówienia dopasuj część, interfejs i stan.

W przypadku części, kontrolerów, kamer, gimbali i akcesoriów Reboot Hub sprawdza dokładny przedmiot, tożsamość części, widoczny stan i znaną zgodność z informacjami dostępnymi dla zamówienia. Poproś nas o sprawdzenie dopasowania przed dokonaniem płatności, jeśli komponent jest specyficzny dla modelu lub wersji.