정확한 상태가 나열됨
제품 페이지는 상태, 눈에 보이는 세부 정보, 포함된 항목 및 모델별 호환성 참고 사항에 대한 정보의 출처입니다.
컨디션 가이드
DJI Air 3S 마더보드 - OEM-pulled
제품 요약:DJI Air 3S 마더보드 - OEM-pulled는 도너 유닛에서 제거되어 Air 3S 수리 작업을 위해 준비된 정품...
공급업체:
DJI
유효성:
재고 있음
- $120.00
- 단가
- 단위
OEM-pulled/서비스 부품
180일 부품 제한 보증사진 + 포장 증명
설치된 부품은 단순 변심 반품 대상이 아닙니다. 설치 후 청구는 검증된 보증 사례로만 처리됩니다. 구매하기 전에 모델, 커넥터, 보드 버전 및 부품 위치를 일치시키십시오.
소계:
$120.00
픽업 사용 가능 여부를 로드할 수 없습니다.
After checkout, Reboot Hub confirms the exact order, checks the actual item against the listing, documents proof where applicable, records a packing video, and shares tracking.
Email approvalWe email the exact item and selected configuration for you to confirm.
1–5 business daysPreparation and dispatch begin after you reply and approve the order details.
14–21 days internationalSome routes arrive in around 10 days, but delivery times are estimates and are not guaranteed.
- 01Order Confirmation
- 02Item Review
- 03Proof Shared
- 04Packing Video
- 05Tracking Sent
왜 Reboot Hub인가.
약속 이전의 증거.
해외 중고 구매를 어렵게 만드는 질문(상품이 무엇인지, 어떻게 생겼는지, 무엇이 포함되어 있는지, 무엇이 확인되었는지, 누가 포장했는지)을 줄입니다.
180일 보증
적격 중고 제품에는 제품 페이지에 표시된 보증 조건과 명확하게 명시된 제외 사항이 포함됩니다.
정책 보기MOHRSS 인증팀
당사의 기술적 배경은 파견 전 실제 검사, 수리 위험 검토 및 호환성 확인을 지원합니다.
당사 인증Reboot Hub에 의해 처리됨
우리는 이러한 주문을 직송하지 않습니다. 우리 팀이 품목을 검토하고, 보호 장치를 준비하고, 포장하고, 발송을 기록합니다.
우리의 표준포장 증명
우리 팀이 점검, 보호, 완충 및 봉인했습니다.
이 실제 포장 기록은 Reboot Hub가 고가의 RC Pro 2 주문을 어떻게 처리하는지 보여줍니다. 목록 검토, 적절한 추가 보호, 완충, 최종 봉인, 추적 가능한 배송 등 동일한 신중한 프로세스가 장비 전체에 적용됩니다.
- 주문과 대조하여 실제 품목 확인
- 액세서리 및 패키지 내용물을 검토했습니다.
- 장비 및 경로에 대한 보호 선택
- 발송 전 보관된 포장 증거
PRODUCT EVIDENCE
Full transparency, from inspection to delivery.
Understand the exact unit, recorded condition, evidence and protection behind your order.
01 Inspection report photos ACTUAL UNIT
Photos inside the inspection report show the actual unit prepared for your order, rather than a reused sample product.
02 Condition & inspection record SAME UNIT
The condition grade and inspection record describe the same unit that is approved and prepared for dispatch.
03 Function & diagnostic evidence FULL TRANSPARENCY
Available function checks, diagnostic results, notes and supporting video are disclosed for the unit being supplied.
04 Packing video FULL PACKING RECORD
The packing record documents how the approved item is protected, cushioned and sealed for this order before dispatch.
05 Tracking & dispatch record TRACEABLE DELIVERY
Shipment tracking is shared after dispatch so the delivery record remains connected to the confirmed order.
정확한 상품정보
배송 전에 상품을 알아보세요.
선택한 제품 페이지, 변형 및 서면 확인은 상태, 호환성, 포함 항목 및 보증 조건에 대한 진실의 출처로 유지됩니다.
조건 승인됨
선택한 제품 상태 및 포함된 장비는 배송 전에 이 목록과 비교하여 확인됩니다.
요약 정보 및 호환성
출고 전 선택한 모델, 컨트롤러, 배터리, 충전기 및 액세서리 세대에 대한 호환성을 확인합니다.
제품 기능
Protects the gimbal and camera assembly on the DJI Air 3S drone.
상자에는 무엇이 들어있나요?
선택한 변형은 포함된 장치, 컨트롤러, 배터리, 충전기, 케이스 및 액세서리에 대한 정보의 출처입니다. Reboot Hub는 배송 전에 정확한 패키지를 확인합니다.
DJI Air 3S Motherboard - OEM-pulled · PRODUCT KNOWLEDGE
DJI Air 3S Motherboard - OEM-pulled, clearly explained
Product summary: DJI Air 3S Motherboard - OEM-pulled is a genuine DJI board removed from a donor unit and prepared for Air 3S repair work. It is intended for technicians or experienced repair buyers matching the exact model, board version, connector layout, and installation position.
Product category
Spare PartsCurrent Shopify product classification.Listing condition
As listedExact condition and cosmetic grade are governed by this listing and selected variant.Available selection
Single listed configurationThe selected variant and listing photographs control included items.Core function
Protects the gimbal and camera assembly on the DJI Air 3S drone.Based on the current product listing.Inspection focus
Condition, core function, compatibility and included piecesReboot Hub review scope before dispatch.Written coverage
Listing-specific written termsCheck the warranty, shipping and return terms shown on this listing before purchase.INTERNATIONAL BUYER CHECK
International use & compatibility
주문하기 전에 모델 버전, 목적지 무선 요구 사항, 활성화 및 현지 비행 규칙을 확인하십시오.
DJI 지역 호환성 가이드 읽기PRODUCT COMPATIBILITY
Compatibility for DJI Air 3S 마더보드 - OEM-pulled
| Item | Status | What to know |
|---|---|---|
| Exact host model | Exact match required | Match DJI Air 3S Motherboard to the full donor and host model, generation and part number before ordering. |
| Hardware revision and position | Confirm | Confirm connector layout, board or mechanical revision, left/right position and subtype (board-electronics) from the listing photographs. |
| Installation scope and included pieces | Listing-specific | Confirm whether this listing includes only the pulled part or also its cables, screws, brackets, adhesive and related hardware. |
| Exact equipment model | Confirm | Match the full DJI model and generation before ordering. |
| Connection or mounting path | Confirm | Check the documented connector, mounting interface and intended workflow. |
| Included pieces | Listing-specific | Use the selected variant and listing photographs as the source of truth. |
SELECTED PACKAGE = SOURCE OF TRUTH
What your package means
01
Exact listed item
The selected variant, its photographs and Reboot Hub written confirmation determine the exact included pieces.
The selected variant, its images and the Reboot Hub inspection record determine the exact included pieces.
FIRST FLIGHTSetup checklist+
- 01
Confirm the exact host model and part number
Match DJI Air 3S Motherboard, its hardware revision and physical position to the intended equipment before disassembly.
- 02
Inspect the pulled part and every connector
Compare the exact item with listing photographs; check pins, flex cables, mounts, sensors and contact surfaces for damage.
- 03
Install with equipment safely powered down
Use the model-specific service procedure, ESD precautions, correct tools and documented fastener sequence; specialist installation may be required.
- 04
Run a controlled function and calibration check
Reassemble only after checking fitment, then verify the affected function and complete any documented calibration before operational use.
QUICK ANSWERSTroubleshooting+
- FITMENT
The part does not align or seat correctly
Stop installation and re-check the exact host model, hardware revision, side, position and connector orientation.
- CONNECTOR
The affected function is still unavailable
Inspect every related connector and flex cable, then verify installation, firmware and required calibration before judging the replacement part.
- INSTALLATION
A warning appears after reassembly
Record the exact warning, power down safely and review the model-specific service path; do not force calibration or operation.
- DAMAGE
The part or surrounding assembly is damaged
Stop work to prevent secondary damage and document the item, connector and mounting area before seeking technical support.
DOCUMENTED PRODUCT EVIDENCE
Complete product reference
PRODUCT QUESTIONS
Useful answers before checkout
What exactly is included with DJI Air 3S Motherboard - OEM-pulled?
The selected variant, listing photographs and Reboot Hub written confirmation determine the exact included item, cables, controller, battery and accessories.
What does Reboot Hub check on DJI Air 3S Motherboard - OEM-pulled?
Reboot Hub reviews visible condition, core equipment functions, compatibility risk and listed package contents before dispatch. Evidence is supplied where applicable to the product type.
How should I confirm DJI Air 3S Motherboard - OEM-pulled compatibility?
Send Reboot Hub the exact aircraft, controller, goggles, battery or accessory model before ordering. Compatibility can depend on hardware generation, firmware and region.
What condition is this DJI Air 3S Motherboard - OEM-pulled?
This listing identifies the item as as listed. The selected variant, photographs and written confirmation remain the source of truth for condition and included pieces.
Will I receive proof and tracking before shipment?
After checkout, Reboot Hub confirms the exact order. Where applicable, it shares actual-item or function evidence, records packing video and provides shipment tracking.
상장 뒤에 숨은 실제 팀
우리를 방문하세요Reboot Hub가게
Reboot Hub는 검사된 중고 장비, 정품 OEM-pulled 부품, 모델별 호환성 검사, 신중한 소싱 및 수리 지원 판매 후 지원을 통해 전 세계 구매자를 지원합니다.
당사의 서비스 데스크는 해외 구매자에게 익명의 마켓플레이스 목록이 아닌 발송 전에 연락할 수 있는 실제 팀을 제공합니다.
Reboot Hub Service Desk - Shenzhen만하커머셜센터 A동 1층 H1370
Huaqiangbei Street, Futian District
월요일~일요일 오전 11시~오후 7시
GUIDES, SUPPORT & LEARNING
Practical DJI Air 3S 마더보드 - OEM-pulled guidance, beyond the listing.
Use focused guides for model comparisons, pre-flight decisions, and battery care. The product page proves the item; these resources help you own and fly it well.
DJI Air 3S Motherboard - OEM-pulled: complete model reference
Continue from the purchase decision into one organized model reference covering compatibility, setup, parts context, common failure points and supporting DJI documents.
Read guide
DJI Drone Pre-Flight Checklist: Go/No-Go Checks
Use a practical aircraft, battery, propeller, controller, Home Point, and environment check before deciding to launch.
Read guide
DJI Battery Charging: Compatibility and Safe Checks
Check the battery, charger, cable, temperature, and indicator behavior before treating a charging problem as a failed battery.
Read guide