DJI Mavic 3 Pro Parts

Choose DJI Mavic 3 Pro parts by aircraft version and the component identified for your repair. The range includes OEM-pulled camera and gimbal pieces, structural components, navigation modules, cables and boards recovered from donor equipment, checked and offered with their condition stated. Pro and Cine wording applies to the individual listing that names it.

• Model scope: the original DJI Mavic Pro is a different model name; these listings do not confirm interchangeability.
• Condition: use listing photos and condition notes to assess visible wear and the stated condition.
• Selection: match the named component and position to the confirmed repair scope.
• Contents: a component name does not establish every supplied item or a complete assembly.
• Protection: limited parts coverage covers verified defects in the supplied part. Structural and installation-sensitive parts qualify only for verified pre-existing defects or a wrong item supplied. Wrong-model orders and installation damage are excluded.

Choose the component your repair needs

For camera work, the Lens is the optical component; the Camera Front Frame and Camera Rear Frame are distinct frame pieces. Choose the frame position named in the confirmed repair scope. The Lens title does not identify which camera channel it serves.

For gimbal work, distinguish the Gimbal Frame Rear Cover from the Gimbal Mounting Cover and the Gimbal Upper Vibration Absorbing Board. These are separately named components, not a confirmed complete gimbal assembly. Match the named piece to the confirmed repair scope.

For structural work, the Rear Arm Rotating Axis is an axis, while the Rear Left Arm Module and Front Right Arm Module are arm modules at different named positions. Choose the axis or arm position identified for replacement.

For navigation, the Compass Module is separate from the GPS + IMU boards; the board choice is covered in the comparison below. For electrical work, the Auxiliary Bottom Light Board and ESC Board are distinct boards. The Core Board to WiFi Board Flexible Flat Cable connects the two named boards and is distinct from either board. Match each choice to the confirmed component requirement.

Compare Pro and Cine GPS + IMU boards

Both listings describe OEM-pulled boards. For model identification, official specifications distinguish the Mavic 3 Pro’s 8 GB internal storage from the Mavic 3 Pro Cine’s 1 TB; only Cine supports ProRes recording. These aircraft differences do not establish replacement-board compatibility. Confirm aircraft version, component, connector, revision and supplied contents; similar appearance or series names do not establish interchangeability.

How we recover parts and document condition

The Reboot Hub Standard describes donor-unit disassembly to recover usable original components, which are checked and offered with their condition stated clearly. Small parts and accessories may use listing photos, condition notes and model-fit information.

Photos help assess visible wear and compare component details; photos alone do not prove functional performance. The full 40-point inspection applies to activated pre-owned drones and is not a blanket spare-parts inspection promise.

When the fault needs diagnosis

A generic fault label alone does not identify the DJI Mavic 3 Pro component needing replacement. The repair service evaluates the exact model, reported symptom, visible condition, relevant crash or moisture history and previous repairs.

Where safe and applicable, physical and electronic checks can cover impact, moisture, connectors, housings, camera, gimbal, motors, sensors or boards. Connector and housing observations assess visible physical condition; camera or gimbal checks assess the reported behavior. These repair checks do not describe tests on a particular catalog part. A repair decision uses a written scope and customer approval.

Parts protection and installation boundaries

OEM-pulled and service replacement parts coverage applies to verified defects in the supplied part itself. Wrong-model ordering, incorrect matching, installation or soldering damage, modification, crash or liquid damage, misuse, and faults caused by other damaged components are excluded.

Structural and installation-sensitive parts are covered only for verified pre-existing defects or a wrong item supplied. Broken clips, screw damage, installation marks and fitting damage are excluded. Installed spare parts are handled as verified warranty cases rather than change-of-mind returns.

Claims may require order details, photos, video, installation context, diagnostic information and return inspection. Review the warranty policy.

Frequently asked questions

Will DJI Mavic 3 Pro parts fit the original DJI Mavic Pro?

These listings name DJI Mavic 3 Pro components and do not confirm interchangeability with the original DJI Mavic Pro. Match the exact aircraft and component before ordering.

Can I use a DJI Mavic 3 Pro GPS + IMU board in a Mavic 3 Pro Cine?

The DJI Mavic 3 Pro GPS + IMU Board and DJI Mavic 3 Pro Cine GPS + IMU Board are separate OEM-pulled listings. They do not establish interchangeability; choose according to the confirmed aircraft version and GPS + IMU requirement.

What does OEM-pulled mean for these DJI Mavic 3 Pro parts?

An OEM-pulled DJI Mavic 3 Pro component is recovered from donor equipment, checked and offered with its condition stated. Listing photos and condition notes help assess visible condition, but photos alone do not prove functional performance.

Does a camera frame or gimbal cover include the complete camera and gimbal assembly?

A DJI Mavic 3 Pro Camera Front Frame, Camera Rear Frame or named gimbal cover is a separately identified component; its name does not establish a complete camera or gimbal assembly. Review the listing for supplied contents.

What protection applies to OEM-pulled DJI Mavic 3 Pro parts?

Coverage concerns verified defects in the supplied part itself. Wrong-model orders, incorrect matching, installation or soldering damage, modification, crash or liquid damage, misuse, and faults caused by other damaged components are excluded. Structural and installation-sensitive parts are covered only for verified pre-existing defects or a wrong item supplied.

Can I return a DJI Mavic 3 Pro part after installing it?

Installed DJI Mavic 3 Pro spare parts are handled as verified warranty cases, not change-of-mind returns. Structural and installation-sensitive coverage excludes installation marks, fitting damage, broken clips and screw damage.

Should I order a replacement board before the fault has been diagnosed?

A generic fault label does not identify a failed DJI Mavic 3 Pro board. If the component is unidentified, use the <a href="https://reboot-hub.com/pages/repair-ticket">repair ticket</a> with the exact model, symptoms, visible damage and relevant history, then review the written scope before approving repair.

If the component is identified, open its product card, review model fit and supplied contents, then order through that listing. If the fault is unidentified, use the repair ticket with the exact model, symptoms, visible damage and relevant history; review the written scope before approving repair.