The DJI Mini 3 Pro is a Mini series DJI drone released in 2022, with 249 g, 1/1.3-inch CMOS, 4K/60fps, 34 min, model-specific range, and O3 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Mini series DJI drone, released 2022 |
| Flight profile | 249 g takeoff weight; 34 min flight time |
| Camera profile | 1/1.3-inch CMOS; 4K/60fps video |
| Signal profile | O3 |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Mini 3 Pro is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Mini 3 Pro, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Mini 3 Pro. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
The DJI Mini 3 Pro is a consumer drone from the Mini series, released in 2022. It features a weight of 249 grams and a 1/1.3-inch CMOS sensor capable of recording 4K video at 60 frames per second.
| Takeoff Weight | <249 g [1] |
| Dimensions (L×W×H) | Folded: 145×90×62 mm |
| Max Ascent Speed | 5 m/s (S Mode) |
| Max Descent Speed | 5 m/s (S Mode) |
| Max Speed (at sea level, no wind) [2] | 16 m/s (S Mode) |
| Max Flight Time | 34 mins (with Intelligent Flight Battery and measured while flying at 21.6 kph in windless conditions) |
| Max Hovering Time | 30 mins (with Intelligent Flight Battery, no wind) |
| Max Flight Distance | 18 km (with Intelligent Flight Battery and measured while flying at 43.2 kph in windless conditions) |
| Max Wind Speed Resistance | 10.7 m/s (Level 5) |
| Max Pitch Angle | Forward: 40°, Backward: 35° (S Mode) |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System (GNSS) | GPS + Galileo + BeiDou |
| Hovering Accuracy Range | Vertical: |
| Class | C0 (EU) |
| Max Control Speed (tilt) | 100°/s |
| Shutter Speed | Electronic Shutter: 2-1/8000 s |
| Sensor | 1/1.3-inch CMOS |
| Lens | FOV: 82.1° |
| ISO Range | Video: 100-6400 (Auto), 100-6400 (Manual) |
| Max Image Size | 8064 × 6048 |
| Still Photography Modes | Single Shot: 12 MP |
| Photo Format | JPEG/DNG (RAW) |
| Video Resolution | 4K: 3840×2160@24/25/30/48/50/60fps |
| Video Format | MP4/MOV (H.264/H.265) |
| Max Video Bitrate | 150 Mbps |
| Supported File System | FAT32 (≤32 GB) |
| Max Download Bitrate [5] | DJI O3: |
| Mechanical Range | Tilt: -135° to 80° |
| Controllable Range | Tilt: -90° to 60° |
| Stabilization | 3-axis mechanical gimbal (tilt, roll, and pan) |
| Angular Vibration Range | ±0.01° |
| Forward | Precision Measurement Range: 0.39-25 m |
| Backward | Precision Measurement Range: 0.36-23.4 m |
| Downward | Precision Measurement Range: 0.15-9 m |
| Operating Environment | Diffuse reflective surface with a clear pattern and reflectivity >20% (such as cement pavement) |
| Operation Frequency | 2.400-2.4835 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) |
| Video Transmission System | DJI O3 |
| Live View Quality | 1080p/30fps |
| Max Transmission Distance (free of interference) | FCC: 12 km CE: 8 km SRRC: 8 km MIC: 8 km Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. During your flight, please pay attention to RTH reminders in the DJI Fly app. |
| Max Transmission Distance (with interference) | Strong Interference: urban landscape, approx. 1.5-3 km Medium Interference: suburban landscape, approx. 3-7 km Low Interference: suburb/seaside, approx. 7-12 km Data tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual flight distance. |
| Antennas | 4 antennas, 1T2R |
| Audio Transmission | N/A |
| Protocol | 802.11 a/b/g/n/ac |
| Wi-Fi Protocol | 802.11 a/b/g/n |
| Wi-Fi Transmitter Power (EIRP) | 2.400-2.4835 GHz: <23 dBm (FCC), <20 dBm (CE/SRRC/MIC) |
| Bluetooth Protocol | Bluetooth 4.2 |
| Bluetooth Transmitter Power (EIRP) | 2.400-2.4835 GHz: <10 dBm |
| Diagonal Length | 247 mm |
| Max Service Ceiling Above Sea Level | With Intelligent Flight Battery: 4000 m |
| Max Angular Velocity (by default)* | 130°/s (S Mode) |
| Auxiliary Bottom Light | N/A |
| HDR Mode | Photo: HDR supported in Single Shot mode |
| Zoom Range | 4K: 2x |
| QuickShot Modes | Dronie, Helix, Rocket, Circle, Boomerang, and Asteroid |
| Color Profiles | Normal |
| Communication Bandwidth | 1.4MHz/3MHz/10MHz/20MHz/40MHz |
| Latency (depending on environmental conditions and mobile device) | Aircraft + Remote Controller: Approx. 120 ms |
| Voltage | 7.38 V |
| Charging Voltage Limit | 8.5 V |
| Supported Memory Cards | UHS-I Speed Class 3 or above is required. |
| Supported Port Types | Lightning, Micro-USB (Type-B), USB-C |
| Max Battery Time | 6 hrs (without charging any mobile device) |
| Model | RM330 |
| Storage Capacity | DJI RC's storage capacity can be increased by using a microSD card. Users can store images and videos on the card and export them to a computer or other devices. |
| Video Output Port | N/A |
| Max Battery Life | Approx. 4 hours |
| Supported SD Cards | UHS-I Speed Class 3 or above is required. |
| Compatible DJI Charger | DJI 30W USB-C Charger or other USB Power Delivery chargers (30 W) |
| Compatible DJI Batteries | DJI Mini 3 Pro Intelligent Flight Battery, DJI Mini 3 Pro Intelligent Flight Battery Plus [7] |
| Mobile Device App | DJI Fly |
| Required Operating System | iOS v11.0 or later |
| Footnotes | 1. Standard aircraft weight (including DJI Mini 3 Pro Intelligent Flight Battery, propellers, and a microSD card). The actual product weight may vary due to differences in batch materials and external factors. Training or examination is not required for flying this product in most countries and regions. Always check local laws and regulations before use. Data was measured with the latest firmware. Firmware updates can enhance product performance, so updating to the latest firmware is highly recommended. With the DJI Mini 3 Pro Intelligent Flight Battery Plus, the aircraft will weigh more than 249 g (about 290 g). Always check and strictly abide by local laws and regulations before flying. |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
8 serviceable parts in this zone.
12 serviceable parts in this zone.
2 serviceable parts in this zone.
3 serviceable parts in this zone.
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Mini research cluster
This page supports the research layer. Use the buying guide, live collection, and Reboot Hub trust pages to connect specs, compatibility, inspection evidence, warranty terms, and current inventory before choosing a unit.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
