The DJI Neo is a Neo series DJI drone released in 2024, with 135 g, 1/2-inch image sensor, 4K/30fps, 18 min, 10 km, and O4 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Neo series DJI drone, released 2024 |
| Flight profile | 135 g takeoff weight; 18 min flight time |
| Camera profile | 1/2-inch image sensor; 4K/30fps video |
| Signal profile | O4; 10 km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Neo is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Neo, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Neo. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
DJI Neo バッテリーは、汎用セル バンドルではなく、密閉されたインテリジェント バッテリー パックとして扱う必要があります。購入者は、飛行に使用する前に、目に見える状態、膨張、ラッチのフィット感、サイクル履歴、充電動作、およびバッテリーが純正かどうかを確認する必要があります。
このブロックでは、情報が公式または直接検証された資料から得られたものでない限り、分解の詳細、セルのレイアウト、または内部の化学的性質について記述すべきではありません。安全な購入者の価値は、パックを開封することではなく、状態を確認することです。
スキンは、センサー、通気口、ステータス ライト、ラベル、バッテリー ラッチ、充電接点、プロペラ クリアランス、またはアクセス パネルを覆わずに、DJI Neo に適合する必要があります。材料の端が浮き上がったり、砂が溜まったり、亀裂や衝撃痕の検査を妨げたりしないことを確認します。
装飾用付属品は、航空機の状態が記録された後にのみ取り付けてください。より広範なモデル適合性チェックを行うには、DJI アクセサリの互換性ガイド再販または保証レビューに使用される状態写真で元の表面が見えるようにしておきます。
The DJI Neo is an entry-level drone in the Neo series, released in 2024. Weighing just 135 g, it features a maximum transmission range of 10 km and an 18-minute flight time. Its camera system can capture 4K video at 30fps using a 1/2-inch image sensor with O4 transmission.
| Takeoff Weight | Approx. 135 g |
| Dimensions | 130×157×48.5 mm (L×W×H) |
| Max Ascent Speed | 0.5 m/s (Cine mode) |
| Max Descent Speed | 0.5 m/s (Cine mode) |
| Max Horizontal Speed (near sea level, no wind) | 6 m/s (Normal mode) |
| Max Takeoff Altitude | 2000 m |
| Max Flight Time | Approx. 18 mins (approx. 17 mins with the Propeller Guards)* |
| Max Hovering Time | Approx. 18 mins (approx. 17 mins with the Propeller Guards) |
| Max Flight Distance | 7 km |
| Max Wind Speed Resistance | 8 m/s (Level 4) |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + Galileo + BeiDou |
| Hovering Accuracy Range | Vertical: |
| Internal Storage | 22 GB |
| Class | C0 (EU) |
| Shutter Speed | Video: 1/8000-1/30 s |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | Wi-Fi: 25 MB/s |
| Image Sensor | 1/2-inch image sensor |
| Lens | FOV: 117.6° |
| ISO Range | 100-6400 (Auto) |
| Max Image Size | 12 MP Photo |
| Still Photography Modes | Single/Timed Shot |
| Photo Format | JPEG |
| Video Resolution | EIS Off: 4K (4:3): 3840×2880@30fps 1080p (4:3): 1440×1080@60/50/30fps EIS On: 4K (16:9): 3840×2160@30fps 1080p (16:9): 1920×1080@60/50/30fps Vertical Shooting 1080p (9:16) 1080×1920@60/50/30fps |
| Video Format | MP4 |
| Max Video Bitrate | 75Mbps |
| Supported File System | exFAT |
| Color Mode | Normal |
| Stabilization | Single-axis mechanical gimbal (tilt) |
| Mechanical Range | Tilt: -120° to 120° |
| Controllable Range | Tilt: -90° to 60° |
| Angular Vibration Range | ±0.01° |
| Sensing Type | Downward visual positioning |
| Downward | Precise Hovering Range: 0.5-10 m |
| Operating Environment | Downward: |
| Video Transmission System | O4 |
| Live View Quality | With DJI RC-N3 Remote Controller: Up to 1080p/60fps |
| Operating Frequency | 2.400-2.4835 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: |
| Max Transmission Distance (unobstructed, free of interference) | FCC: 10 km |
| Max Transmission Distance (unobstructed, with interference) | Strong Interference (urban landscape): Approx. 1.5-3 km |
| Max Transmission Distance (obstructed, with interference) | Low Interference and Obstructed by Buildings: Approx. 0-0.5 km |
| Lowest Latency | With DJI RC-N3 Remote Controller: Approx. 120 ms |
| Antennas | Two antennas, 1T2R |
| Protocol | 802.11a/b/g/n/ac |
| EIS | Supports RockSteady, HorizonBalancing, and turning stabilization off.* |
| Image Roll Correction | Supports correction of footage recorded on the drone |
| Communication Bandwidth | Max 40 MHz |
| Effective Operating Range | 50 m |
| Max Operating Time | Without Charging Any Mobile Device: 3.5 hours |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsVerified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
