DJI Flip
Quick Answer
The DJI Flip is a Flip series DJI drone released in 2025, with 249g, 1/1.3-inch image sensor, 4K/100fps, 31 min, 13 km FCC / 8 km CE, and O4 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Flip Comparison Snapshot
| Model position | Flip series DJI drone, released 2025 |
| Flight profile | 249g takeoff weight; 31 min flight time |
| Camera profile | 1/1.3-inch image sensor; 4K/100fps video |
| Signal profile | O4; 13 km FCC / 8 km CE max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
About the DJI Flip
DJI Flip is a 2025 camera drone with foldable full-coverage propeller guards. DJI lists a takeoff weight below 249 g, a 1/1.3-inch 48 MP camera, 4K/60fps HDR and 4K/100fps slow motion, up to 31 minutes of flight time, 12 m/s maximum horizontal speed in still air, and O4 transmission up to 13 km under FCC conditions.
Technical Specifications
| Takeoff Weight | < 249 g |
| Dimensions | Folded: 136×62×165 mm (L×W×H) Unfolded: 233×280×79 mm (L×W×H) |
| Max Ascent Speed | 5 m/s (Sport mode) 5 m/s (Normal mode) 2 m/s (Cine mode) |
| Max Descent Speed | 5 m/s (Sport mode) 5 m/s (Normal mode) 1.5 m/s (Cine mode) |
| Max Horizontal Speed | 12 m/s at sea level in still air in Sport or Follow mode; 16 m/s in Sport mode with a 4 m/s tailwind under DJI wind-tunnel conditions (Follow mode: 12 m/s). |
| Max Takeoff Altitude | 3000 m |
| Max Flight Time | 31 minutes |
| Max Hovering Time | 28 minutes |
| Max Flight Distance | 14 km |
| Max Wind Speed Resistance | 10.7 m/s (Level 5) |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + Galileo + BeiDou |
| Hovering Accuracy Range | Vertical: ±0.1 m (with vision positioning) ±0.5 m (with satellite positioning) Horizontal: ±0.3 m (with vision positioning) ±1.5 m (with satellite positioning) |
| Internal Storage | 2 GB |
| Class | C0 (EU) |
| Shutter Speed | 12MP Photo: 1/16000-2 s (2.5-8 s for simulated long exposure) |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | DJI O4: 10 MB/s with DJI RC-N3 or DJI RC 2; Wi-Fi 5: up to 30 MB/s in DJI's stated low-interference dual-band laboratory conditions. |
| Image Sensor | 1/1.3-inch image sensor |
| Lens | FOV: 82.1° Format Equivalent: 24 mm Aperture: f/1.7 Focus: 1 m to ∞ |
| ISO Range | Video Normal/Slow Motion: ISO 100–6400 Normal or 100–1600 D-Log M; Photo: 12 MP 100–6400, 48 MP 100–3200. |
| Max Image Size | 48MP Photo 8064×6048 |
| Still Photography Modes | Single Shot: 12 MP and 48 MP Burst Shooting: 12 MP, 3/5/7 frames Automatic Exposure Bracketing (AEB): 12 MP, 3/5/7 frames at 2/3 EV step Timed: 12 MP, 2/3/5/7/10/15/20/30/60 s |
| Photo Format | JPEG |
| Video Resolution | 4K 3840×2160 or FHD 1920×1080 at 24/25/30/48/50/60/100fps; vertical 2.7K 1512×2688 or vertical FHD 1080×1920 at 24/25/30fps. |
| Video Format | MP4 |
| Max Video Bitrate | 150Mbps |
| Supported File System | exFAT |
| Color Mode | Normal |
| Digital Zoom | 4K: 3x |
| Stabilization | 3-axis mechanical gimbal (tilt, roll, pan) |
| Mechanical Range | Tilt Axis: -130° to +63° |
| Controllable Range | Tilt Axis: -90° to +35° |
| Angular Vibration Range | ±0.01° |
| Sensing Type | Downward: one visual sensor and an infrared sensor, Forward: 3D Infrared Sensing System |
| Forward | 3D Infrared Sensing System |
| Downward | Measurement Range: 0.3-8 m (reflectivity > 10%) |
| Operating Environment | Downward sensing: textured, diffusely reflective surfaces above 20% reflectivity with light above 15 lux. |
| Video Transmission System | O4 |
| Live View Quality | Remote controller: up to 1080p/60fps. |
| Operating Frequency | 2.4000-2.4835 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: <30 dBm FCC, <20 dBm CE/SRRC/MIC; 5.1 GHz: <23 dBm CE; 5.8 GHz: <33 dBm FCC, <30 dBm SRRC, <14 dBm CE. |
| Max Transmission Distance (unobstructed, free of interference) | FCC: 13 km |
| Max Transmission Distance (unobstructed, with interference) | FCC typical-condition test, unobstructed: strong urban interference approx. 1–2.5 km; medium suburban interference approx. 2.5–7 km; low-interference suburb/seaside approx. 7–13 km. These figures do not guarantee an actual flight distance. |
| Max Transmission Distance (obstructed, with interference) | FCC low-interference test with obstruction: buildings approx. 0–0.5 km; trees approx. 0.5–2 km. These figures do not guarantee an actual flight distance. |
| Lowest Latency | Approx. 120 ms |
| Antenna | 4 antennas (2.4 GHz: 1T2R; 5.2/5.8 GHz: 2T2R) |
| Protocol | 802.11a/b/g/n/ac |
| Effective Operating Range | 50 m |
| Rated Power | 65 W |
| Max Operating Time | Without Charging Any Mobile Device: 3.5 hours |
| Mobile Device App | DJI Fly |
| Required Operating System | iOS 13.0 or later |
| Official detailed specs | https://www.dji.com/cn/flip/specs (checked 2026-10-16) |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Flip Parts Library
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsCompatible Power & Accessories
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.