Zenmuse Series / Released 2014

DJI Zenmuse Z15-GH4 (HD)

Zenmuse Series Payload

About the DJI Zenmuse Z15-GH4 (HD)

Zenmuse Z15-GH4 (HD) is DJI’s 2014 three-axis HD gimbal specified for Panasonic GH4/GH3 and an Olympus 12 mm f/2.0 lens. DJI lists a 1.26 kg gimbal and a distinct 690 g reference GH4/lens load. The supported camera/lens and gimbal calibration matter more than the similar Z15 name; do not treat the GH4 model as interchangeable with BMPCC, 5D III or A7 versions.

Technical Specifications

Device ClassThree-axis HD camera gimbal; camera and aircraft are separate components
DJI-Listed CameraPanasonic GH4 or GH3
DJI-Listed LensOlympus M.Zuiko Digital ED 12 mm f/2.0
Gimbal Weight / Dimensions1.26 kg; 233 × 210 × 192 mm
Reference Camera/Lens Load690 g for Panasonic GH4, Olympus 12 mm f/2.0, battery and SD card; a listed setup, not an interchangeable maximum payload rating
Controlled Angle Accuracy±0.01°
Controlled RotationPan ±360° continuous; tilt +50° to −140°; roll ±40°
Maximum Controlled Rotation SpeedPan/tilt ±130°/s; roll ±30°/s
GCU / Input63 g GCU; 4S–12S LiPo input listed by DJI; follow the exact aircraft installation manual
Receiver ControlS-Bus/PPM receiver support; at least four spare receiver channels
Operating Temperature−10°C to 50°C
DJI-Listed Aircraft ContextMatrice 600 Pro support specifications list this Z15 Series HD gimbal; verify the correct mount, GCU, control path and firmware
Legacy SoftwareDJI product page states Zenmuse Assistant Software distribution/updates were discontinued from 2018-05-15
Official Sourceshttps://www.dji.com/zenmuse-z15-gh4-hd/info; https://www.dji.com/support/product/matrice600-pro (checked 2026-10-16)

Common Failure Modes

Gimbal initialization or control issue medium

Symptoms: Gimbal does not initialize, hold horizon or respond to control.

Likely areas: GCU power, receiver channels, calibrated camera/lens and gimbal mechanics

Check the exact Z15 model and DJI installation requirements before considering component service.

Video or shutter-control issue medium

Symptoms: Camera image or remote camera control is unavailable.

Likely areas: camera mode, HDMI/AV path, cable, power and control configuration

Distinguish camera and transmission faults from the gimbal; verify the documented camera/lens pair.

Repair Notes

Exact variant

Match the Z15 model label to its DJI-listed camera, lens, weight and control limits.

Legacy integration

Verify GCU, power, receiver channels, aircraft mount and supported software/firmware before fitting.

Service

A used camera, lens, GCU or mount is not presumed included; confirm components and written scope after inspection.

Product & Parts Mapping Status

No current Reboot Hub product route or model-specific Parts Atlas mapping is shown until exact evidence is verified. Use the primary technical source above for the current model boundary.

DJI Zenmuse Z15-GH4 (HD)

No current Reboot Hub product route or model-specific Parts Atlas mapping is shown until exact evidence is verified. Use the primary technical source above for the current model boundary.

DJI Zenmuse Z15-GH4 (HD) — frequently asked questions

Does DJI Zenmuse Z15-GH4 (HD) include the camera?
No camera inclusion is established by the gimbal specifications. DJI lists Panasonic GH4 or GH3 and Olympus M.Zuiko Digital ED 12 mm f/2.0 as the supported reference setup; verify the actual used-unit bundle.
What does 1.26 kg mean for DJI Zenmuse Z15-GH4 (HD)?
DJI lists 1.26 kg for the Z15 gimbal itself and separately lists a camera/lens reference load (690 g for Panasonic GH4, Olympus 12 mm f/2.0, battery and SD card). Neither figure is the aircraft takeoff weight.
Can I use any camera or lens with DJI Zenmuse Z15-GH4 (HD)?
DJI lists Panasonic GH4 or GH3 with Olympus M.Zuiko Digital ED 12 mm f/2.0 for this model. Confirm the exact calibrated camera/lens setup and mounting parts rather than assuming another Z15 variant is interchangeable.
Which aircraft does DJI list with DJI Zenmuse Z15-GH4 (HD)?
DJI’s Matrice 600 Pro support specifications name the Z15 Series HD gimbals including this model. Confirm the complete mount, GCU, controller and firmware integration before installation.
Base de datos de modelos
FPV / Avata
Neo
Flip
Spark / Tello