DJI Inspire 3 Parts replacement parts collection - Reboot Hub

Reboot Hub collection

DJI Inspire 3 Parts

57 products available

Browse OEM-pulled DJI Inspire 3 repair parts by exact component and position. Compare the listed model, connectors, included pieces and photographs before ordering.

57 products

DJI Inspire 3 parts for camera, sensor and central-board work

Current OEM-pulled Inspire 3 records include a DL mount, FPV camera front-shell, FPV camera IMU and camera modules, sensor board, central board, aircraft ESC board, GPS + IMU board, battery-release buckles, gimbal quick-release protective cover and downward-vision sensor adaptive board.

Keep the system path explicit

First separate imaging hardware from vision hardware, aircraft boards, battery-release hardware and gimbal protection. Then compare the item title, side where stated, connector or mount detail and actual-item imagery. A right or left battery-release buckle is a distinct record. A camera shell, camera module and camera IMU module are also different decisions.

Selected listing photos and condition notes are essential for the exact OEM-pulled item. Use the Drone Wiki for model background before a repair plan is made.

Inspire 3 FPV components, landing stations and release hardware

Inspire 3 names its FPV camera module, FPV IMU, camera covers and coaxial lead as separate parts. It also groups landing and ESC-bracket hardware by M1/M3 or M2/M4. Preserve the system and station rather than treating any camera or gimbal-related item as the same assembly.

Inspire 3 FPV components, landing stations and release hardware: component comparison
Listed components How to choose between them
DJI Inspire 3 FPV Camera Module
DJI Inspire 3 FPV Camera IMU Module
DJI Inspire 3 FPV Camera Front Shell Module
DJI Inspire 3 FPV Camera Coaxial Cable 		The FPV camera module, its IMU module, front shell and coaxial cable are different components. An FPV cover or lead does not constitute the complete camera module.
DJI Inspire 3 Landing Gear Module (M1/M3)
DJI Inspire 3 Landing Gear Module (M2/M4)
DJI Inspire 3 ESC Board Bracket (M1/M3)
DJI Inspire 3 ESC Board Bracket (M2/M4) 		Landing-gear modules and ESC brackets are divided into M1/M3 and M2/M4 groups. Match the original station and the type of support.
DJI Inspire 3 Gimbal Release Button
DJI Inspire 3 Gimbal Release Button Base Module
DJI Inspire 3 Gimbal Quick-Release Bracket
DJI Inspire 3 Gimbal Quick-Release Cover Plate 		Gimbal release button, button-base module, quick-release bracket and cover plate are different mechanical pieces around the release system.
DJI Inspire 3 Gimbal Rubber Dampers (3-Pack)
DJI Inspire 3 Gimbal Rubber Damper (4-Pack) 		Three-pack and four-pack gimbal damper products have separate listing identities. Compare the intended arrangement and required quantity.

Battery-release sides and sensor paths

Right and left battery-release buckles and springs are separately named, alongside the release lever. Downward and upward vision adaptive boards, the radar adaptive board, TOF connecting cable and front/rear RTK antennas are also distinct paths. Match the original connection and position before choosing an electronic part.

Read port and dust protection literally

Timecode-input, USB-C and expansion-port rubber stoppers have separate names. The lower cover, dust mesh, damping sleeve and roll/yaw-axis arm covers are individual structures; a port stopper or camera shell does not imply its board, sensor or internal cable is supplied.

Inspire 3 station and FPV questions

Is the FPV camera IMU the same item as the FPV camera module?

No. They have separate product pages, as do the front shell, rear cover and camera coaxial cable. Match the component required by the repair.

Can an M1/M3 landing-gear module be chosen as the M2/M4 version?

Do not infer interchangeability. The station groups are explicitly different product identities; compare the original gear and mounting arrangement.

Model information and repair reference

Read the matching Drone Wiki for model information and repair reference. The individual product listing and photographs define the component supplied; the Wiki is not a blanket compatibility statement.