Genuine DJI Spare Parts Guide — Will It Fit, Is It Genuine, Will It Work
Genuine DJI spare parts
Will it fit? Is it genuine? Will it work?
The three questions everyone asks before buying a drone part — answered. Every Reboot Hub spare part is a genuine OEM-pulled DJI component, matched to your exact model, function-tested, and warranty-backed.
Genuine OEM-pulled
Model & connector match
Function-tested
180-day warranty
The short answer
- It's genuine. Parts are original DJI components pulled from donor units — never third-party clones that fit loosely or fail early.
- It fits — if four things match. Aircraft model, connector type, board version, and physical position (left/right, front/rear). Confirm these and the part fits.
- It works. Each part is function-tested for the fault it replaces before it ships.
- It's covered. Genuine spare parts carry a 180-day limited warranty on verified part faults.
- Not sure? Ask first. Send us your model and the part — we confirm compatibility before you buy.
Four things that make a part a safe buy
The difference between a part that drops in and one that wastes your money.
Genuine
OEM-pulled, not a clone
Original DJI hardware pulled from donor units and tested. Third-party clones often differ by connector or tolerance and fail early — genuine parts fit and behave like the original.
Compatible
Matched to your exact model
Listings use clear model naming so you match the right part — Air 2S is not Air 2, and revisions differ. Four checks confirm fit before you buy.
Tested
Function-verified before dispatch
Each part is checked for the fault it replaces. Cosmetic wear can vary on a pulled part, but the function is confirmed.
Guaranteed
180-day parts warranty
Genuine DJI spare parts carry a 180-day limited warranty on verified part faults. Installed parts aren't eligible for change-of-mind returns.
Warranty policy ›How to confirm a part fits — four checks
Run these before you buy. If a listing doesn't state your revision, ask us first.
- Aircraft modelMatch the exact model, including sub-variant — "Air 2S" and "Air 2" use different parts, as do Mini 3 and Mini 3 Pro.
- Connector typeCables and boards differ by connector. Check the plug shape and pin count against the part you're replacing.
- Board / hardware versionSome models shipped in revisions. If your unit has a specific board version, confirm the part matches it.
- Physical positionLeft vs right, front vs rear — arm, axis, and shell parts are position-specific. Match the side you need.
Not sure which part your model uses? Browse the full model-by-model breakdown in the DJI Parts Database ›
OEM-pulled part vs the alternatives
One broken part, four ways to deal with it. Here's what actually differs.
| Reboot Hub OEM-pulled | Third-party clone part | Buy a whole new unit | Official repair | |
|---|---|---|---|---|
| Genuine DJI part | Yes | No — clone | Yes (whole unit) | Yes |
| Fits like the original | Yes — 4-check | Often poor | N/A | Yes |
| Cost | Part only | Lowest | Full retail | High |
| Available for older models | Yes | Varies | Often discontinued | Often declined |
| Warranty | 180 days | Rare | Yes | Yes |
| Fix vs replace everything | Fix one part | Fix one part | Replace all | Fix |
Spare parts — your questions, answered
How do I make sure a spare part fits my DJI drone?
Confirm four things: the exact aircraft model, the connector type, the board or hardware version, and the physical position (left or right, front or rear). Many DJI parts look similar within a model family but differ by connector or revision. If a listing doesn't state your revision, ask us to confirm compatibility before you buy.
Are these original DJI parts or third-party copies?
They are genuine OEM-pulled DJI components — original parts pulled from donor units and tested — not third-party clones. Because they're pulled rather than new-in-box retail stock, cosmetic wear can vary, but the part is functionally verified before dispatch.
Can you supply parts for discontinued or older DJI models?
Often yes. Because parts are pulled from donor units, we can cover many older and discontinued models that no longer have new parts available — one of the main reasons buyers choose OEM-pulled over buying a whole new aircraft.
What warranty and returns apply to spare parts?
Genuine DJI spare parts carry a 180-day limited warranty covering verified part faults. Because installation can't be reversed, installed parts aren't eligible for change-of-mind returns; after installation, claims are handled as verified warranty cases under the warranty policy. Confirm the part matches your aircraft before installing.
Can Reboot Hub fit the part for me?
Yes. If you'd rather not install it yourself, our repair service can fit genuine parts and return the drone tested. Repair work carries a separate 30-day warranty on parts and workmanship.
Ready to find your part?
Jump to your model, or let us fit it for you.
Shop all DJI spare parts
Browse genuine OEM-pulled parts by drone model and by part type.
Shop spare parts ›Have us fit it
Chip-level repair with genuine parts, returned tested and warranty-backed.
Repair service ›Look up your model's parts
The DJI Parts Database maps every part of every model, zone by zone.
DJI Parts Database ›Why buy from Reboot Hub
Genuine, tested, graded, guaranteed — the trust standard behind every part and drone.
Trust guide ›- يؤدي اختيار تحديد إلى تحديث كامل للصفحة.