DJI Mini 2

Keep Mini 2 camera capability separate from current condition

DJI Mini 2 uses a 1/2.3-inch CMOS camera with 12 MP effective pixels, 24 mm equivalent focal length, 83 degree field of view and f/2.8 aperture. The manual lists 4K up to 30 fps, 2.7K up to 60 fps, Full HD up to 60 fps, JPEG or DNG photos and MP4 video in H.264. These specifications identify the documented model route. They do not establish present focus, lens state, recording behavior or image quality for an individual aircraft.

The same manual describes a three-axis gimbal with a default controllable tilt range of -90 to 0 degrees and an extended range to +20 degrees when its relevant setting is enabled. It warns that a collision, obstruction, dust, sand or excessive external force can affect gimbal operation. An exact-item record should show the lens, camera shell, gimbal arms and protector, then separate current observations from the published system description.

Read the actual battery label before quoting capacity or flight time

The battery features list smart charging and discharging functions, LED level display, temperature detection, overcurrent and over-discharge protections, short-circuit protection, a cell-damage warning in DJI Fly and hibernation under stated low-voltage conditions. These mechanisms explain platform behavior; they do not reveal a supplied battery's history, capacity or future performance. A current record should identify the physical battery, inspect its casing and terminals, and keep any LED observation attached to the time it was made.

DJI lists a 31-minute maximum flight-time reference for the international version at a constant 17 kph in windless conditions; the JP version is listed at 18 minutes under the same stated condition. Those are published test references, not flight-time results for a used battery. The manual lists a 5 to 40 degrees C charging environment for both battery versions. Treat this as a handling boundary, not a measured health conclusion.

Name storage, controller and supplied components separately

DJI Mini 2 stores photos and video on a microSD card, requiring UHS-I Speed Grade 3 or above for high-resolution data. Without a card fitted, the documentation says single photos or 720p normal video can still be captured to the connected mobile device. This explains a model behavior but does not prove that a card, phone, controller cable or recorded media forms part of an item.

The product profile identifies DJI RC-N1 as the controller route and lists a maximum six-hour controller runtime in its stated laboratory context. The aircraft diagram names the gimbal and camera, power button, battery LEDs, downward vision system, infrared sensing system, motors, propellers, antennas, battery compartment cover, USB-C port and microSD slot. A complete exact-item record identifies each supplied component independently instead of inferring a kit from the Mini 2 name.

Build an exact Mini 2 record around the named systems

• Confirm the aircraft is DJI Mini 2 before using any value on this page.
• Show the camera, lens, gimbal and protector separately.
• Read and record the actual battery label; do not assume an international or JP battery route.
• Identify the supplied controller, cable, charger, propellers and microSD card individually.
• Keep LED, display and powered observations tied to the exact time and equipment observed.
• Use published camera, battery and storage facts as model context, not proof of an individual item's condition or contents.

This structure avoids turning an upgrade scenario into a collection of unsupported claims. It gives readers and agents a clear distinction between official Mini 2 documentation, the particular equipment supplied and the remaining unknowns.

DJI Mini 2 questions