DJI Air 3S Gimbal Vibration Absorbing Board - OEM-pulled

DJI Air 3S Gimbal Vibration Absorbing Board - OEM-pulled

Vanlig pris $34.68
Vanlig pris $34.68 Salgspris
SPAR Utsolgt
TilstandEkte OEM-pulled del
Garanti180-dagers begrenset delegaranti. Se vilkår
DDP-levering Ingen importavgifter pålagt på kvalifiserte bestillinger.
DDP-levering, forklart

For kvalifiserte bestillinger for personlig bruk og destinasjoner som vises i kassen, arrangerer Reboot Hub levering som DDP. Gjeldende importavgifter og avgifter er inkludert i kassen eller håndteres gjennom vår leveringsordning, med mindre kassen eller skriftlig bekreftelse sier noe annet.

Se fraktpolicy, punkt 6
USD 28.88 frakt under USD 99 Gratis standardfrakt gjelder fra USD 99. Endelige leveringsalternativer vises i kassen.

DJI Air 3S Gimbal Vibration Absorbing Board - OEM-pulled. This is the photographed gimbal damping board for an exact Air 3S repair.

What does the DJI Air 3S Gimbal Vibration Absorbing Board do?

This part is part of the gimbal mounting and vibration isolation: it holds the gimbal to the airframe and filters motor vibration out of the footage. For reference, the DJI Air 3S (2024) has a 1-inch 50 MP + 1/1.3-inch 48 MP camera and records video up to 4K/120fps. The listing shows 5 original photographs of this exact part.

Common reasons owners replace it

  • Jello effect or fine vibration visible in video
  • A torn rubber damper or broken mounting bracket
  • A gimbal that sits crooked in its mount after a crash

Related DJI Air 3S parts

See all DJI Air 3S parts. The DJI Air 3S repair guide covers teardown order and checks.

Fitment: Match the board outline, mounting points, damping interfaces and attached hardware to the removed original before ordering.

Included: One OEM-pulled board in the photographed configuration. Aircraft, tools, screws and unrelated gimbal parts are not included unless shown.

Condition: Removed original part; inspect the gallery for the exact configuration and cosmetic condition.

How do I confirm fitment?

This Gimbal Vibration Absorbing Board is listed specifically for the DJI Air 3S. Compare the outline, connector layout, mounting points and printed markings shown in the gallery with the removed original before ordering; visually similar parts from other DJI aircraft can use different connectors or mounting geometry.

What is included?

The listing includes one photographed Gimbal Vibration Absorbing Board in OEM-pulled condition. Aircraft, tools, screws, adhesive and connected assemblies are excluded unless they are clearly shown. Diagnose the failed component before installation and use a qualified repair technician when the repair requires internal disassembly.

OEM-pulled DJI Air 3S Gimbal Vibration Absorbing Board on white with Reboot Hub watermark overlay — view 1

DJI Air 3S Gimbal Vibration Absorbing Board - OEM-pulled

Vanlig pris $34.68
Vanlig pris $34.68 Salgspris
SPAR Utsolgt
Vis alle detaljer

NØYAKTIG DELER OG UTSTYR PASSER

Match delen, grensesnittet og tilstanden før du bestiller.

For deler, kontrollere, kameraer, gimbals og tilbehør, sjekker Reboot Hub den nøyaktige varen, delens identitet, synlig tilstand og kjent kompatibilitet mot informasjonen som er tilgjengelig for bestillingen. Be oss om å bekrefte tilpasning før betaling når en komponent er modell- eller revisjonsspesifikk.