The DJI Phantom 3 Advanced is a consumer quadcopter from the Phantom series released in 2015. It features a 5 km maximum transmission range using Lightbridge technology and a 2.7K camera with a 1/2.3-inch CMOS sensor. The model has a weight of 1280 g and a maximum flight time of 23 minutes.
| Weight (Battery & Propellers Included) | 1280 g |
| Max Ascent Speed | 5 m/s |
| Max Descent Speed | 3 m/s |
| Max Speed | 16 m/s (ATTI mode) |
| Max Pitch Angle | 35° |
| Max Angular Speed | 150°/s |
| Max Flight Time | Approx. 23 minutes |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Satellite Positioning Systems | GPS/GLONASS |
| Electronic Shutter Speed | 8 - 1/8000 s |
| Max Controllable Angular Speed | Pitch: 90°/s |
| Altitude Range | 30 - 300 cm |
| Net Weight | 365 g |
| Sensor | 1/2.3” CMOS |
| Lens | FOV 94° 20 mm (35 mm format equivalent) f/2.8 focus at ∞ |
| ISO Range | 100-3200 (video) 100-1600 (photo) |
| Image Size | 4000×3000 |
| Still Photography Modes | Single Shot Burst Shooting: 3/5/7 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV Bias Timelapse |
| Max Video Bitrate | 40 Mbps |
| Supported File Systems | FAT32 (≤32 GB); exFAT (>32 GB) |
| Photo | JPEG, DNG (RAW) |
| Stabilization | 3-axis (pitch, roll, yaw) |
| Controllable Range | Pitch: -90° to +30° |
| Operating Environment | Surface with clear pattern and adequate lighting (lux>15) |
| Operating Frequency | 2.400 - 2.483 GHz |
| Max Transmission Distance | FCC Compliant: 3.1 mi (5 km) |
| Transmitter Power (EIRP) | FCC: 20 dBm CE: 16 dBm MIC: 16 dBm |
| Live View Working Frequency | 2.4 GHz ISM |
| Live View Quality | 720P @ 30fps |
| Diagonal Size (Propellers Excluded) | 350 mm |
| Max Service Ceiling Above Sea Level | 19685 feet (6000 m) |
| Hover Accuracy Range | Vertical: |
| Video Recording Modes | 2.7K: 2704 x1520p 24/25/30 (29.97) |
| Video | MP4, MOV (MPEG-4 AVC/H.264) |
| Supported SD Cards | Micro SD |
| Angular Control Accuracy | ±0.02° |
| Vision System | Downward Vision System |
| Velocity Range | ≤8 m/s (2 m above ground) |
| Operating Range | 50 - 300 cm |
| Battery | 6000 mAh LiPo 2S |
| Operating Current/Voltage | 1.2 A@7.4 V |
| Video Output Port | USB |
| Mobile Device Holder | Tablets and smart phones |
| Voltage | 17.4 V |
| Rated Power | 57 W |
| Mobile App | DJI GO |
| Latency | 220ms (depending on conditions and mobile device) |
| Required Operating Systems | iOS 8.0 or later Android 4.1.2 or later |
| Recommended Devices | ios: iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPod touch 6, iPad Pro, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4, and iPad mini 4 Wi-Fi + Cellular. This app is optimized for iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s and iPhone 6s Plus. Android: Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 9, Google Nexus 7 II, Ascend Mate7, Huawei Mate 8, Nubia Z7 mini, SONY Xperia Z3, MI 3, MI PAD*Support for additional Android devices available as testing and development continues. |
Body shells, arms, covers, feet, LED covers, and structural hardware for this model.
Core electronics, power control, navigation boards, and sensing modules.
Signal, power, camera, vision, GPS, and LED flex cables routed through the aircraft.
Camera module, lens frame, gimbal motors, vibration board, and stabilizer hardware.