Mavic Series / Released 2022
DJI Mavic 3 Thermal
Mavic Series
Enterprise
920 g
About the DJI Mavic 3 Thermal
The DJI Mavic 3 Thermal is an enterprise-tier drone from the Mavic series, released in 2022. It is equipped with a dual-sensor payload featuring a 1/2-inch 48MP wide camera and a 640x512 radiometric thermal imager, alongside a maximum flight time of 45 minutes.
Technical Specifications
| Sensor | 1/2-inch 48MP wide + 640x512 radiometric thermal |
| Max Video | 4K/30fps |
| Transmission | O3 Enterprise |
| Takeoff Weight | 920 g |
| Max Range | 15 km |
| Max Flight Time | 45 min |
| Release Year | 2022 |
DJI Mavic 3 Thermal Parts Library
External
Body shells, arms, covers, feet, LED covers, and structural hardware for this model.
DJI Mavic 3 Thermal Bottom ShellLower body cover, feet mounts, and underside structure.External
DJI Mavic 3 Thermal Top ShellUpper body cover and main exterior housing.External
DJI Mavic 3 Thermal Front Arm (Left)Left front arm assembly, motor mount, and landing area.External
DJI Mavic 3 Thermal Front Arm (Right)Right front arm assembly, motor mount, and landing area.External
DJI Mavic 3 Thermal Rear Arm (Left)Left rear arm assembly and rear hinge structure.External
DJI Mavic 3 Thermal Rear Arm (Right)Right rear arm assembly and rear hinge structure.External
DJI Mavic 3 Thermal Landing GearFront leg, rear foot pad, and landing support parts.External
DJI Mavic 3 Thermal Screw KitModel-specific screws for shells, arms, boards, and gimbal service.External
Circuit Boards
Core electronics, power control, navigation boards, and sensing modules.
DJI Mavic 3 Thermal Core BoardMain logic board for flight control, processing, and system communication.Circuit Boards
DJI Mavic 3 Thermal ESC BoardElectronic speed controller board for motor power delivery.Circuit Boards
DJI Mavic 3 Thermal GPS + IMU BoardPositioning and attitude sensing board used for stable flight.Circuit Boards
DJI Mavic 3 Thermal Vision SystemObstacle sensing or positioning camera module depending on the model.Circuit Boards
DJI Mavic 3 Thermal Infrared Sensing SystemInfrared distance or detection module used by supported models.Circuit Boards
Flex Cables
Signal, power, camera, vision, GPS, and LED flex cables routed through the aircraft.
DJI Mavic 3 Thermal ESC Board Flex CableBoard-to-board cable for ESC communication and power control.Flex Cables
DJI Mavic 3 Thermal GPS Flex CableSignal cable between GPS module and main electronics.Flex Cables
DJI Mavic 3 Thermal Vision Flex CableFlex route for obstacle sensing or downward vision assemblies.Flex Cables
DJI Mavic 3 Thermal Gimbal PTZ Flex CableCamera and gimbal control flex cable for pitch, roll, and yaw movement.Flex Cables
DJI Mavic 3 Thermal LED CableArm light or status LED wiring used in the aircraft shell.Flex Cables
Gimbal
Camera module, lens frame, gimbal motors, vibration board, and stabilizer hardware.
DJI Mavic 3 Thermal Complete Gimbal AssemblyFull camera and gimbal assembly for complete module replacement.Gimbal
DJI Mavic 3 Thermal Camera ModuleCamera sensor and lens module used inside the gimbal assembly.Gimbal
DJI Mavic 3 Thermal Gimbal Pitch MotorPitch-axis motor that controls camera tilt movement.Gimbal
DJI Mavic 3 Thermal Gimbal Roll MotorRoll-axis motor for horizon stabilization.Gimbal
DJI Mavic 3 Thermal Gimbal Yaw MotorYaw-axis motor and arm assembly for lateral stabilization.Gimbal
DJI Mavic 3 Thermal Gimbal Vibration BoardShock absorption mount between the aircraft body and gimbal module.Gimbal
Browse All Models
Enterprise