DJI Spreading Wings S1000+
About the DJI Spreading Wings S1000+
DJI Spreading Wings S1000+ is a DJI professional multirotor frame/platform, not a factory-integrated camera drone. DJI lists a 4.4 kg frame assembly and a 6.0–11.0 kg configured takeoff range. Its published hover reference is 15 min at 9.5 kg with 6S 15,000 mAh; battery, controller, gimbal/camera and radio must be specified for the actual build. S1000+ adds a revised power distribution system and removable upper center board; do not import original S1000 4.2 kg frame weight. This is an English official-source Wiki reference, not a current stock or parts offer.
Technical Specifications
| Product Identity | DJI Spreading Wings S1000+ professional multirotor frame/platform; not a factory-integrated camera drone |
| Frame Assembly Weight | 4.4 kg in the DJI manual; excludes separately selected flight battery, flight controller, camera/gimbal and radio |
| DJI Takeoff Weight Range | 6.0–11.0 kg; match the complete configured aircraft before flight |
| DJI Hover Reference | 15 min at 9.5 kg with 6S 15,000 mAh under DJI published configuration, not a universal payload/endurance pairing |
| Recommended Power Battery | 6S LiPo 10,000–20,000 mAh, 15C minimum; actual pack/package must be verified |
| Diagonal Wheelbase | 1045 mm |
| Center Frame | 337 mm center-frame diameter |
| Motor / Propeller | 41×14 mm stator, 400 rpm/V; DJI 1552/1552R folding 15×5.2-inch propellers |
| ESC | 40 A, 6S LiPo; 30–450 Hz signal, 8 kHz drive PWM in DJI manual |
| Working Environment Temperature | -10 to 40 °C |
| Flight Controller | DJI A2 or WooKong-M settings documented; flight controller selected separately |
| Camera / Gimbal | DJI announcement confirms Zenmuse Z15-5D compatibility; verify configured gimbal and takeoff weight |
| Control and Video Range | Not specified by the bare frame; depends on the separately selected controller and video system |
| Model Boundary | S1000+ adds a revised power distribution system and removable upper center board; do not import original S1000 4.2 kg frame weight. |
| DJI Official User Manual | https://dl.djicdn.com/downloads/s1000_plus/en/S1000%EF%BC%8B_User_Manual_en_v1.4.pdf |
| DJI Official Product Specification | https://www.dji.com/spreading-wings-s1000-plus/info |
| Max Power / Hover Power | 4,000 W maximum; 1,500 W hover at 9.5 kg takeoff weight |
| Landing Gear | Retractable landing gear is part of DJI frame specification; confirm the actual assembled hardware |
Common Failure Modes
Symptoms: Cracked arm, loose folding joint or visible structural deformation after impact.
Likely areas: frame arms, hinges, center plates, landing gear and fasteners
Keep the configured aircraft grounded until structure and full takeoff weight are checked.
Symptoms: Motor roughness, folding propeller damage or abnormal vibration.
Likely areas: motors, ESCs, propellers, arm mounts and wiring
Verify model-specific parts and balance before any controlled test flight.
Repair Notes
Read the exact Spreading Wings S1000+ label; S900, S1000 and S1000+ frame masses differ.
Record the selected flight controller, battery, camera/gimbal, radio and full takeoff weight before assessing a fault.
This Wiki profile does not certify parts interchangeability, saleable stock or service capability.