Inspire Series / Released 2014
DJI Inspire 1
Inspire Series
Professional
2935g
About the DJI Inspire 1
The DJI Inspire 1 is a professional-grade quadcopter from the Inspire series, first released in 2014. It features a 4K camera with a 1/2.3-inch sensor and uses Lightbridge video transmission technology with a range of 2 kilometers. The aircraft has a maximum flight time of 18 minutes and weighs 2935 grams.
Technical Specifications
| GPS Hovering Accuracy | Vertical: ±1.64 feet (0.5 m)Horizontal: ±8.20 feet (2.5 m) |
| Max Pitch Angle | 35° |
| Max Ascent Speed | 16.4 ft/s (5 m/s) |
| Max Descent Speed | 13.1 ft/s (4 m/s) |
| Max Speed | 49 mph or 79 kph (ATTI mode, no wind) |
| Max Wind Speed Resistance | 10 m/s |
| Max Flight Time | Approx. 18 min |
| Indoor Hovering | Enabled by default |
| Operating Temperature | 14° to 104° F (-10° to 40° C) |
| Max Takeoff Weight | 7.71 lbs(3500 g) |
| Max Controllable Speed | Pitch: 120°/s |
| Storage Temperature | Less than 3 months: -4° to 113° F (-20° to 45° C) |
| Electronic Shutter Speed | 8s － 1/8000s |
| Operating Temperature Range | 0° to 40° C |
| Net Weight | 570 g |
| Storage Temperature Range | Less than 3 months: -4° to 113° F (-20° to 45° C) |
| Altitude Range | 5-500 cm |
| ISO Range | 100-3200 (video) |
| Lens | 20mm (35mm format equivalent)f/2.8 focus at ∞ |
| Still Photography Modes | Single shoot |
| Max Bitrate of Video Storage | 60 Mbps |
| Ultrasonic Sensor Operating Range | 0.17-16.4 feet (5-500 cm) |
| Ultrasonic Sensor Operating Environment | Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance) |
| Angular Vibration Range | ±0.03° |
| Controllable Range | Pitch: -90° to +30° |
| Mechanical Range | Pitch: -125° to +45° |
| Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
| Operating Frequency | 922.7-927.7 MHz (Japan Only) |
| Model | T600 |
| Max Angular Velocity | Pitch: 300°/s |
| Max Takeoff Sea Level | 1.55 mi (2500 m) |
| Motor Model | DJI 3510H |
| Propeller Model | DJI 1345T |
| Diagonal Distance(propeller excluded) | 22.8 inch (581 mm, Landing Mode) |
| Interface Type | Detachable |
| Max Transmitting Distance(unobstructed, free of interference) | Up to 5 km or 3.1 miles when FCC compliant |
| EIRP | 10dBm@900m, 13dBm@5.8G, 20dBm@2.4G |
| Video Output Ports | USB, mini-HDMI |
| Power Supply | Built-in battery |
| Charging | DJI charger |
| Dual User Capability | Host-and-Slave connection |
| Mobile Device Holder | Tablet or Smart Phone |
| Max Mobile Device Width | 170mm |
| Battery | 6000mAh 2S LiPo |
| Name | X3 |
| Total Pixels | 12.76M |
| Effective Pixels | 12.4M |
| Image Max Size | 4000x3000 |
| FOV (Field of View) | 94° |
| CMOS | 1/2.3” CMOS |
| Video Recording Modes | UHD (4K): 4096x2160p24/25, 3840x2160p24/25/30 |
| Supported File Formats | FAT32/exFAT |
| Supported SD Card Types | Micro SD |
| Voltage | 26.3 V |
| Rated Power | 100 W |
| Velocity Range | <26.2 ft/s (8 m/s) at height of 6.56 feet (2 m) |
| Operating Range | <9.8 feet (3 m) |
| Mobile Device System Requirements | iOS 8.0 or later, Android 4.1.2 or later |
DJI Inspire 1 Parts Library
External
Body shells, arms, covers, feet, LED covers, and structural hardware for this model.
DJI Inspire 1 Bottom ShellLower body cover, feet mounts, and underside structure.External
DJI Inspire 1 Top ShellUpper body cover and main exterior housing.External
DJI Inspire 1 Front Arm (Left)Left front arm assembly, motor mount, and landing area.External
DJI Inspire 1 Front Arm (Right)Right front arm assembly, motor mount, and landing area.External
DJI Inspire 1 Rear Arm (Left)Left rear arm assembly and rear hinge structure.External
DJI Inspire 1 Rear Arm (Right)Right rear arm assembly and rear hinge structure.External
DJI Inspire 1 Landing GearFront leg, rear foot pad, and landing support parts.External
DJI Inspire 1 Screw KitModel-specific screws for shells, arms, boards, and gimbal service.External
Circuit Boards
Core electronics, power control, navigation boards, and sensing modules.
DJI Inspire 1 Core BoardMain logic board for flight control, processing, and system communication.Circuit Boards
DJI Inspire 1 ESC BoardElectronic speed controller board for motor power delivery.Circuit Boards
DJI Inspire 1 GPS + IMU BoardPositioning and attitude sensing board used for stable flight.Circuit Boards
DJI Inspire 1 Vision SystemObstacle sensing or positioning camera module depending on the model.Circuit Boards
DJI Inspire 1 Infrared Sensing SystemInfrared distance or detection module used by supported models.Circuit Boards
Flex Cables
Signal, power, camera, vision, GPS, and LED flex cables routed through the aircraft.
DJI Inspire 1 ESC Board Flex CableBoard-to-board cable for ESC communication and power control.Flex Cables
DJI Inspire 1 GPS Flex CableSignal cable between GPS module and main electronics.Flex Cables
DJI Inspire 1 Vision Flex CableFlex route for obstacle sensing or downward vision assemblies.Flex Cables
DJI Inspire 1 Gimbal PTZ Flex CableCamera and gimbal control flex cable for pitch, roll, and yaw movement.Flex Cables
DJI Inspire 1 LED CableArm light or status LED wiring used in the aircraft shell.Flex Cables
Gimbal
Camera module, lens frame, gimbal motors, vibration board, and stabilizer hardware.
DJI Inspire 1 Complete Gimbal AssemblyFull camera and gimbal assembly for complete module replacement.Gimbal
DJI Inspire 1 Camera ModuleCamera sensor and lens module used inside the gimbal assembly.Gimbal
DJI Inspire 1 Gimbal Pitch MotorPitch-axis motor that controls camera tilt movement.Gimbal
DJI Inspire 1 Gimbal Roll MotorRoll-axis motor for horizon stabilization.Gimbal
DJI Inspire 1 Gimbal Yaw MotorYaw-axis motor and arm assembly for lateral stabilization.Gimbal
DJI Inspire 1 Gimbal Vibration BoardShock absorption mount between the aircraft body and gimbal module.Gimbal
Browse All Models
Enterprise