Mavic Series / Released 2022
DJI Mavic 3 Classic
Mavic Series
Prosumer
895 g
About the DJI Mavic 3 Classic
The DJI Mavic 3 Classic is a 2022 prosumer addition to the Mavic series. It features a 4/3 CMOS sensor for 4K/120fps video and offers a maximum flight time of 46 minutes.
Technical Specifications
| Takeoff Weight | 895 g |
| Dimensions | Folded (without propellers): 221×96.3×90.3 mm (L×W×H) |
| Max Ascent Speed | 8 m/s |
| Max Descent Speed | 6 m/s |
| Max Horizontal Speed (at sea level, no wind) | 21 m/s |
| Max Takeoff Altitude | 6000 m |
| Max Flight Time | 46 minutes |
| Max Hovering Time | 40 minutes |
| Max Flight Distance | 30 km The flight distance is different from the video transmission distance. The data was tested in a controlled environment, under the following specific test conditions: flying at a constant speed of 50.4 kph in a windless environment at sea level, with APAS off, AirSense off, camera parameters set to 1080p/24fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. |
| Max Wind Speed Resistance | 12 m/s |
| Max Pitch Angle | 35° |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + Galileo + BeiDou |
| Hovering Accuracy Range | Vertical: |
| Internal Storage | 8 GB (approx. 7.9GB available space) |
| Class | C1 (EU) |
| Shutter Speed | Electronic Shutter: 8-1/8000 s |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | O3+: |
| Image Sensor | 4/3 CMOS, Effective Pixels: 20 MP |
| Lens | FOV: 84° |
| ISO Range | Video: |
| Max Image Size | 5280×3956 |
| Still Photography Modes | Single Shot: 20 MP |
| Photo Format | JPEG/DNG (RAW) |
| Video Resolution | H.264/H.265 |
| Video Format | MP4/MOV (MPEG-4 AVC/H.264, HEVC/H.265) |
| Max Video Bitrate | H.264/H.265: 200 Mbps |
| Supported File System | exFAT |
| Color Mode | Normal/HLG/D-Log/D-Log M |
| Digital Zoom | 3× (only in Video Mode) |
| Stabilization | 3-axis mechanical gimbal (tilt, roll, pan) |
| Mechanical Range | Tilt: -135° to 100° |
| Controllable Range | Tilt: -90° to 35° |
| Angular Vibration Range | ±0.007° |
| Sensing Type | Omnidirectional binocular vision system, supplemented with an infrared sensor at the bottom of the aircraft |
| Forward | Measurement Range: |
| Backward | Measurement Range: |
| Lateral | Measurement Range: |
| Upward | Measurement Range: |
| Downward | Measurement Range: |
| Operating Environment | Forward, Backward, Left, Right, and Upward: |
| Video Transmission System | O3+ |
| Live View Quality | Remote Controller: |
| Operating Frequency | 2.400-2.4835 GHz |
| Transmission Power (EIRP) | 2.400-2.4835 GHz: |
| Max Transmission Distance (free of interference) | FCC: 15 km |
| Max Transmission Distance (with interference) | Strong Interference: urban landscape, approx. 1.5-3 km |
| Lowest Latency | 130 ms (with DJI RC-N1 Remote Controller) |
| Antennas | 4 antennas, 2T4R |
| Transmitter Power (EIRP) | DJI RC-N1 Remote Controller |
| Charging Voltage Limit | 17.6 V |
| Rated Power | 65 W |
| Max Operating Time | DJI RC-N1 Remote Controller |
| Guaranteed software updates until | 2026/12/31 |
DJI Mavic 3 Classic Parts Library
External
Body shells, arms, covers, feet, LED covers, and structural hardware for this model.
DJI Mavic 3 Classic Bottom ShellLower body cover, feet mounts, and underside structure.External
DJI Mavic 3 Classic Top ShellUpper body cover and main exterior housing.External
DJI Mavic 3 Classic Front Arm (Left)Left front arm assembly, motor mount, and landing area.External
DJI Mavic 3 Classic Front Arm (Right)Right front arm assembly, motor mount, and landing area.External
DJI Mavic 3 Classic Rear Arm (Left)Left rear arm assembly and rear hinge structure.External
DJI Mavic 3 Classic Rear Arm (Right)Right rear arm assembly and rear hinge structure.External
DJI Mavic 3 Classic Landing GearFront leg, rear foot pad, and landing support parts.External
DJI Mavic 3 Classic Screw KitModel-specific screws for shells, arms, boards, and gimbal service.External
Circuit Boards
Core electronics, power control, navigation boards, and sensing modules.
DJI Mavic 3 Classic Core BoardMain logic board for flight control, processing, and system communication.Circuit Boards
DJI Mavic 3 Classic ESC BoardElectronic speed controller board for motor power delivery.Circuit Boards
DJI Mavic 3 Classic GPS + IMU BoardPositioning and attitude sensing board used for stable flight.Circuit Boards
DJI Mavic 3 Classic Vision SystemObstacle sensing or positioning camera module depending on the model.Circuit Boards
DJI Mavic 3 Classic Infrared Sensing SystemInfrared distance or detection module used by supported models.Circuit Boards
Flex Cables
Signal, power, camera, vision, GPS, and LED flex cables routed through the aircraft.
DJI Mavic 3 Classic ESC Board Flex CableBoard-to-board cable for ESC communication and power control.Flex Cables
DJI Mavic 3 Classic GPS Flex CableSignal cable between GPS module and main electronics.Flex Cables
DJI Mavic 3 Classic Vision Flex CableFlex route for obstacle sensing or downward vision assemblies.Flex Cables
DJI Mavic 3 Classic Gimbal PTZ Flex CableCamera and gimbal control flex cable for pitch, roll, and yaw movement.Flex Cables
DJI Mavic 3 Classic LED CableArm light or status LED wiring used in the aircraft shell.Flex Cables
Gimbal
Camera module, lens frame, gimbal motors, vibration board, and stabilizer hardware.
DJI Mavic 3 Classic Complete Gimbal AssemblyFull camera and gimbal assembly for complete module replacement.Gimbal
DJI Mavic 3 Classic Camera ModuleCamera sensor and lens module used inside the gimbal assembly.Gimbal
DJI Mavic 3 Classic Gimbal Pitch MotorPitch-axis motor that controls camera tilt movement.Gimbal
DJI Mavic 3 Classic Gimbal Roll MotorRoll-axis motor for horizon stabilization.Gimbal
DJI Mavic 3 Classic Gimbal Yaw MotorYaw-axis motor and arm assembly for lateral stabilization.Gimbal
DJI Mavic 3 Classic Gimbal Vibration BoardShock absorption mount between the aircraft body and gimbal module.Gimbal
Browse All Models
Enterprise