DJI Phantom 4 Pro
Quick Answer
The DJI Phantom 4 Pro is a Phantom series DJI drone released in 2016, with 1,388 g, 1-inch CMOS, 20 MP, 4K/60fps H.264, 30 min, 7 km FCC / 3.5 km CE, and Lightbridge connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Phantom 4 Pro Comparison Snapshot
| Model position | Phantom series DJI drone, released 2016 |
| Flight profile | 1,388 g takeoff weight; 30 min flight time |
| Camera profile | 1-inch CMOS, 20 MP; 4K/60fps H.264 video |
| Signal profile | Lightbridge; 7 km FCC / 3.5 km CE max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
About the DJI Phantom 4 Pro
DJI Phantom 4 Pro is the 2016 1,388 g version with a 1-inch 20 MP CMOS camera, adjustable f/2.8–f/11 aperture and mechanical shutter. DJI lists H.264 4K up to 60 fps or H.265 4K up to 30 fps, plus approximately 30 minutes of flight. Its enhanced Lightbridge controller is rated up to 7 km FCC or 3.5 km CE at 2.4 GHz in unobstructed, interference-free conditions; the later V2.0 uses a different OcuSync controller system.
Technical Specifications
| Weight (Battery & Propellers Included) | 1388 g |
| Max Ascent Speed | S-mode: 6 m/s |
| Max Descent Speed | S-mode: 4 m/s |
| Max Speed | S-mode: 45 mph (72 kph) |
| Max Pitch Angle | S-mode: 42° |
| Max Angular Speed | S-mode: 250°/s |
| Max Wind Speed Resistance | 10 m/s |
| Max Flight Time | Approx. 30 minutes |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Satellite Positioning Systems | GPS/GLONASS |
| Max Controllable Angular Speed | Pitch: 90°/s |
| Altitude Range | 0 - 33 feet (0 - 10 m) |
| Mechanical Shutter Speed | 8 - 1/2000 s |
| Electronic Shutter Speed | 8 - 1/8000 s |
| Net Weight | 468 g |
| Obstacle Sensory Range | 2 - 98 feet (0.7 - 30 m) |
| Sensor | 1’’ CMOS |
| Lens | FOV 84° 8.8 mm/24 mm (35 mm format equivalent) f/2.8 - f/11 auto focus at 1 m - ∞ |
| ISO Range | Video: ISO 100–3200 Auto or 100–6400 Manual; Photo: ISO 100–3200 Auto or 100–12800 Manual. |
| Image Size | 3:2 Aspect Ratio: 5472 × 3648 |
| PIV Image Size | 4096×2160(4096×2160 24/25/30/48/50p) |
| Still Photography Modes | Single shot; 3/5/7/10/14-shot burst; 3/5-frame AEB at 0.7 EV; timed 2/3/5/7/10/15/20/30/60 s. |
| Max Video Bitrate | 100 Mbps |
| Supported File Systems | FAT32 (≤32 GB); exFAT (>32 GB) |
| Photo | JPEG, DNG (RAW), JPEG + DNG |
| Stabilization | 3-axis (pitch, roll, yaw) |
| Controllable Range | Pitch: -90° to +30° |
| Angular Vibration Range | ±0.02° |
| Operating Environment | Surface with clear pattern and adequate lighting (lux>15) |
| Measuring Frequency | Forward: 10 Hz |
| Operating Frequency | 2.400 - 2.483 GHz and 5.725 - 5.825 GHz |
| Max Transmission Distance | 2.4 GHz: up to 7 km (FCC), 3.5 km (CE), or 4 km (SRRC). 5.8 GHz: up to 7 km (FCC), 2 km (CE), or 5 km (SRRC). Unobstructed and free of interference. |
| Transmitter Power (EIRP) | 2.400 - 2.483 GHz |
| Live View Working Frequency | 2.4 GHz ISM, 5.8 GHz ISM |
| Live View Quality | 720P @ 30fps |
| Diagonal Size (Propellers Excluded) | 350 mm |
| Max Service Ceiling Above Sea Level | 19685 feet (6000 m) |
| Hover Accuracy Range | Vertical: ±0.1 m with vision positioning, ±0.5 m with GPS; horizontal: ±0.3 m with vision positioning, ±1.5 m with GPS. |
| Vision System | Forward Vision System |
| Velocity Range | ≤31 mph (50 kph) at 6.6 ft (2 m) above ground |
| Operating Range | 0 - 33 feet (0 - 10 m) |
| FOV | Forward: 60°(Horizontal), ±27°(Vertical) |
| Video Recording Modes | H.265 |
| Video | MP4/MOV (AVC/H.264; HEVC/H.265) |
| Supported SD Cards | Micro SD |
| Remote Controller Battery | 6000 mAh LiPo 2S |
| Operating Current/Voltage | 1.2 A@7.4 V |
| Video Output Port | GL300E: HDMI |
| Mobile Device Holder | GL300E: Built-in display device (5.5 inch screen, 1920×1080, 1000 cd/m2, Android system, 4 GB RAM＋16 GB ROM) GL300F: Tablets and smart phones |
| Voltage | 17.4 V |
| Rated Power | 100 W |
| Mobile App | DJI GO 4 |
| Latency | Phantom 4 Pro: 220 ms (depending on conditions and mobile device) |
| Official detailed specs | https://www.dji.com/cn/support/product/phantom-4-pro (checked 2026-10-16) |
| Flight Battery | Phantom 4 Pro Intelligent Flight Battery: 5870 mAh, 15.2 V, 89.2 Wh, LiPo 4S. |
| Official flight battery specs | https://www.dji.com/support/product/phantom-4-pro (checked 2026-10-16) |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Phantom 4 Pro Parts Library
External
10 serviceable parts in this zone.
Circuit Boards
4 serviceable parts in this zone.
Flex Cables
2 serviceable parts in this zone.
Gimbal
0 serviceable parts in this zone.
Compatible Power & Accessories
Compatible batteries and accessories are being mapped from verified Reboot Hub inventory.