Controller

DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen)

★★★★☆
Advanced / calibration-sensitive repair
$135.11 USD
Live Shopify product price / Fitment and repair notes
Ships worldwide from Hong Kong when stocked
DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen)

Specifications

Parent controllerDJI Phantom 4 Pro V2.0 Remote Controller
Listed componentDJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen)
Component classBoard and electronics
Listing conditionOEM-pulled; exact unit condition is shown on the live product listing
Reboot Hub listing SKUpart-Phantom-00986
Part fitVerify physical controller model, revision, position and connector against the original part
Official DJI controller sourcehttps://www.dji.com/support/product/phantom-4-pro-v2

Common Failure Modes

A controller function fails or the unit does not start normally.
A main-board fault is only one possibility. Check power, connectors, attached modules and the exact board revision before replacing this part.
medium
The original symptom remains after board replacement.
Recheck the donor/host controller label, connector seating, related flex cables and required service checks; stop if an electrical fault is suspected.
medium

Repair Notes

DJI Phantom 4 Pro V2.0 GL300L Remote Controller Main Board (Without Built-in Screen) Service Notes

Board-level service requires ESD control, careful flex-cable handling and a controlled function check after reassembly. DJI controller source: https://www.dji.com/support/product/phantom-4-pro-v2. This source identifies the parent controller family; individual component fit still requires donor/host part verification.

Related DJI Phantom 4 Pro V2.0 Remote Controller Parts

Need this part?

Buy the OEM part, or let Reboot Hub diagnose and install it for you.

Buy OEM Part → Book Installation
モデルデータベース
FPV / Avata
Neo
Flip
Spark / Tello
Delivery