The DJI Neo is a Neo series DJI drone released in 2024, with 135 g, 1/2-inch image sensor, 4K/30fps, 18 min, 10 km, and O4 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Neo series DJI drone, released 2024 |
| Flight profile | 135 g takeoff weight; 18 min flight time |
| Camera profile | 1/2-inch image sensor; 4K/30fps video |
| Signal profile | O4; 10 km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Neo is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Neo, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Neo. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
DJI Neo 배터리는 일반 셀 번들이 아닌 밀봉된 지능형 배터리 팩으로 취급되어야 합니다. 구매자는 비행에 사용하기 전에 눈에 보이는 상태, 부기, 걸쇠 끼워맞춤, 사용 가능한 주기 기록, 충전 동작 및 배터리가 정품인지 여부를 확인해야 합니다.
이 블록은 해당 정보가 공식 자료 또는 직접 검증된 자료에서 나온 것이 아닌 한 분해 세부 사항, 셀 레이아웃 또는 내부 화학을 설명해서는 안 됩니다. 안전한 구매자의 가치는 팩을 개봉하는 것이 아닌 상태 확인입니다.
스킨은 센서, 통풍구, 상태 표시등, 라벨, 배터리 래치, 충전 접점, 프로펠러 간격 또는 액세스 패널을 덮지 않고 DJI Neo에 맞아야 합니다. 재료가 가장자리에서 들리거나 모래를 가두거나 균열 및 충격 표시 검사를 방해하지 않는지 확인하십시오.
항공기 상태를 문서화한 후에만 장식 액세서리를 설치하십시오. 더 폭넓은 모델 적합성 검사를 위해서는 다음을 사용하세요.DJI 액세서리 호환성 안내재판매 또는 보증 검토에 사용되는 상태 사진에서 원래 표면이 보이도록 유지합니다.
The DJI Neo is an entry-level drone in the Neo series, released in 2024. Weighing just 135 g, it features a maximum transmission range of 10 km and an 18-minute flight time. Its camera system can capture 4K video at 30fps using a 1/2-inch image sensor with O4 transmission.
| Takeoff Weight | Approx. 135 g |
| Dimensions | 130×157×48.5 mm (L×W×H) |
| Max Ascent Speed | 0.5 m/s (Cine mode) |
| Max Descent Speed | 0.5 m/s (Cine mode) |
| Max Horizontal Speed (near sea level, no wind) | 6 m/s (Normal mode) |
| Max Takeoff Altitude | 2000 m |
| Max Flight Time | Approx. 18 mins (approx. 17 mins with the Propeller Guards)* |
| Max Hovering Time | Approx. 18 mins (approx. 17 mins with the Propeller Guards) |
| Max Flight Distance | 7 km |
| Max Wind Speed Resistance | 8 m/s (Level 4) |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + Galileo + BeiDou |
| Hovering Accuracy Range | Vertical: |
| Internal Storage | 22 GB |
| Class | C0 (EU) |
| Shutter Speed | Video: 1/8000-1/30 s |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | Wi-Fi: 25 MB/s |
| Image Sensor | 1/2-inch image sensor |
| Lens | FOV: 117.6° |
| ISO Range | 100-6400 (Auto) |
| Max Image Size | 12 MP Photo |
| Still Photography Modes | Single/Timed Shot |
| Photo Format | JPEG |
| Video Resolution | EIS Off: 4K (4:3): 3840×2880@30fps 1080p (4:3): 1440×1080@60/50/30fps EIS On: 4K (16:9): 3840×2160@30fps 1080p (16:9): 1920×1080@60/50/30fps Vertical Shooting 1080p (9:16) 1080×1920@60/50/30fps |
| Video Format | MP4 |
| Max Video Bitrate | 75Mbps |
| Supported File System | exFAT |
| Color Mode | Normal |
| Stabilization | Single-axis mechanical gimbal (tilt) |
| Mechanical Range | Tilt: -120° to 120° |
| Controllable Range | Tilt: -90° to 60° |
| Angular Vibration Range | ±0.01° |
| Sensing Type | Downward visual positioning |
| Downward | Precise Hovering Range: 0.5-10 m |
| Operating Environment | Downward: |
| Video Transmission System | O4 |
| Live View Quality | With DJI RC-N3 Remote Controller: Up to 1080p/60fps |
| Operating Frequency | 2.400-2.4835 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: |
| Max Transmission Distance (unobstructed, free of interference) | FCC: 10 km |
| Max Transmission Distance (unobstructed, with interference) | Strong Interference (urban landscape): Approx. 1.5-3 km |
| Max Transmission Distance (obstructed, with interference) | Low Interference and Obstructed by Buildings: Approx. 0-0.5 km |
| Lowest Latency | With DJI RC-N3 Remote Controller: Approx. 120 ms |
| Antennas | Two antennas, 1T2R |
| Protocol | 802.11a/b/g/n/ac |
| EIS | Supports RockSteady, HorizonBalancing, and turning stabilization off.* |
| Image Roll Correction | Supports correction of footage recorded on the drone |
| Communication Bandwidth | Max 40 MHz |
| Effective Operating Range | 50 m |
| Max Operating Time | Without Charging Any Mobile Device: 3.5 hours |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.
Browse verified partsVerified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
