DJI Mavic 2 Enterprise
Quick Answer
The DJI Mavic 2 Enterprise is a Mavic series DJI drone released in 2018, with 905g, 1/2.3-inch CMOS (24x hybrid zoom), 4K/30fps, 31 min, 8km, and OcuSync 2.0 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Mavic 2 Enterprise Comparison Snapshot
| Model position | Mavic series DJI drone, released 2018 |
| Flight profile | 905g takeoff weight; 31 min flight time |
| Camera profile | 1/2.3-inch CMOS (24x hybrid zoom); 4K/30fps video |
| Signal profile | OcuSync 2.0; 8km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
DJI Mavic 2 Enterprise FAQ
What is the DJI Mavic 2 Enterprise best used for?
The DJI Mavic 2 Enterprise is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Is the DJI Mavic 2 Enterprise repairable?
Yes. Reboot Hub maps serviceable parts for the DJI Mavic 2 Enterprise, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
How should I compare the DJI Mavic 2 Enterprise with another DJI drone?
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Can I buy pre-owned DJI Mavic 2 Enterprise parts from Reboot Hub?
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Mavic 2 Enterprise. Match the exact model, part zone, and connector generation before ordering a replacement.
What should I check before buying a used DJI Mavic 2 Enterprise?
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
About the DJI Mavic 2 Enterprise
The DJI Mavic 2 Enterprise is an enterprise-tier quadcopter from the Mavic series, released in 2018. It is equipped with a 1/2.3-inch CMOS sensor offering 24x hybrid zoom and utilizes OcuSync 2.0 transmission for a maximum range of 8 kilometers.
Technical Specifications
| Takeoff Weight | Zoom Edition: 905 g; Dual Edition: 899 g (without accessories) |
| Max Takeoff Weight | 1100 g |
| Dimensions | Folded: 214 x 91 x 84 mm; unfolded: 322 x 242 x 84 mm |
| Max Speed | 72 kph (S-mode, no wind); 50 kph (P-mode, no wind) |
| Max Flight Time | 31 min (no wind, 25 kph) |
| Max Hovering Time | 29 min (no wind; varies with accessories) |
| Max Wind Speed Resistance | 29-38 kph |
| GNSS | GPS + GLONASS |
| Operating Temperature | -10 C to 40 C |
| App | DJI Pilot |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Mavic 2 Enterprise Parts Library
External
2 serviceable parts in this zone.
Circuit Boards
4 serviceable parts in this zone.
Flex Cables
1 serviceable parts in this zone.
Gimbal
0 serviceable parts in this zone.
Compatible Power & Accessories
Compatible batteries and accessories are being mapped from verified Reboot Hub inventory.