The DJI Matrice 350 RTK is a Matrice series DJI drone released in 2023, with 6470g, Payload, DJI video modes, 55min, 20km, and O3 Enterprise connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
| Model position | Matrice series DJI drone, released 2023 |
| Flight profile | 6470g takeoff weight; 55min flight time |
| Camera profile | Payload |
| Signal profile | O3 Enterprise; 20km max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
The DJI Matrice 350 RTK is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.
Yes. Reboot Hub maps serviceable parts for the DJI Matrice 350 RTK, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.
Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.
Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Matrice 350 RTK. Match the exact model, part zone, and connector generation before ordering a replacement.
Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.
The DJI Matrice 350 RTK is a 2023 addition to the enterprise-focused Matrice series, serving as a capable platform for professional aerial operations. It utilizes O3 transmission technology to achieve a maximum control range of 20.0 kilometers. The aircraft supports a maximum flight time of 55 minutes.
| Dimensions (unfolded, no propellers) | 810×670×430 mm |
| Dimensions (folded, with propellers) | 430×420×430 mm |
| Diagonal Wheelbase | 895 mm |
| Weight | Approx. 3.77 kg without batteries; approx. 6.47 kg with two TB65 |
| Max Takeoff Weight | 9.2 kg |
| Single Gimbal Damper Max Payload | 960 g |
| Max Horizontal Speed | 23 m/s (82.8 km/h) |
| Max Ascent / Descent Speed | Ascent 6 m/s; descent 5 m/s vertical, 7 m/s tilt |
| Max Flight Time | 55 min (no payload, ~8 m/s, windless, to 0%) |
| Max Wind Resistance | 12 m/s (43.2 km/h) |
| Max Flight Altitude | 5000 m (2110s props, ≤7.4 kg); 7000 m (2112 high-altitude props, ≤7.2 kg) |
| Transmission | O3 Enterprise — 4 antennas, 2T4R |
| Max Transmission Distance | 20 km (FCC) / 8 km (CE/SRRC/MIC) |
| RTK Positioning Accuracy | 1 cm + 1 ppm horizontal; 1.5 cm + 1 ppm vertical |
| Ingress Protection | IP55 |
| GNSS | GPS + GLONASS + BeiDou + Galileo |
| Operating Temperature | -20°C to 50°C |
| Supported Gimbals | Zenmuse H20, H20T, H20N, P1, L1, L2 |
| Battery / Station | TB65 Intelligent Flight Battery; BS65 Intelligent Battery Station |
| Remote Controller | DJI RC Plus — 7.02" 1920×1200, 1200 nits |
| EU UAS Class | C3 |
| Data Source | DJI Matrice 350 RTK User Manual v1.2 (official) |
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
37 serviceable parts in this zone.
14 serviceable parts in this zone.
10 serviceable parts in this zone.
7 serviceable parts in this zone.
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.
Official website: reboot-hub.com
Our official domain is reboot-hub.com. This is our only current official website for drone repair, pre-owned DJI drones, and OEM parts.
Reboot Hub is an independent repair parts and service provider. Reboot Hub is not affiliated with or endorsed by DJI.
