Phantom Series / Released 2018
DJI Phantom 4 Pro V2.0
Phantom Series
Prosumer
1375 g
About the DJI Phantom 4 Pro V2.0
The DJI Phantom 4 Pro V2.0 is a 2018 addition to the Phantom series, positioned as a prosumer platform. It features a 1-inch CMOS sensor capable of 4K video and utilizes OcuSync 2.0 transmission for a maximum range of 10 km. The aircraft offers a flight time of up to 30 minutes.
Technical Specifications
| Weight (Battery & Propellers Included) | 1375 g |
| Max Ascent Speed | S-mode: 6 m/s |
| Max Descent Speed | S-mode: 4 m/s |
| Max Speed | S-mode: 45 mph (72 kph) |
| Max Pitch Angle | S-mode: 42° |
| Max Angular Speed | S-mode: 250°/s |
| Max Wind Speed Resistance | 10 m/s |
| Max Flight Time | Approx. 30 minutes |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Satellite Positioning Systems | GPS/GLONASS |
| Max Controllable Angular Speed | Pitch: 90°/s |
| Altitude Range | 0-33 ft (0-10 m) |
| Mechanical Shutter Speed | 8-1/2000 s |
| Electronic Shutter Speed | 8-1/8000 s |
| Net Weight | 468 g |
| Obstacle Sensory Range | 2-98 ft (0.7-30 m) |
| Sensor | 1-inch CMOS |
| Lens | FOV 84° 8.8 mm/24 mm (35 mm format equivalent) f/2.8-f/11 auto focus at 1 m-∞ |
| ISO Range | Video: |
| Image Size | 3:2 Aspect Ratio: 5472×3648 |
| PIV Image Size | 4096×2160 (4096×2160 24/25/30/48/50p) |
| Still Photography Modes | Single Shot |
| Max Video Bitrate | 100 Mbps |
| Supported File Systems | FAT32 (≤32 GB); exFAT (>32 GB) |
| Photo | JPEG, DNG (RAW), JPEG + DNG |
| Stabilization | 3-axis (pitch, roll, yaw) |
| Controllable Range | Pitch: -90° to +30° |
| Angular Vibration Range | ±0.02° |
| Operating Environment | Surface with clear pattern and adequate lighting (lux>15) |
| Measuring Frequency | Forward: 10 Hz |
| Operating Frequency | 2.400-2.483 GHz and 5.725-5.850 GHz |
| Max Transmission Distance | 2.400-2.483 GHz, 5.725-5.850 GHz (Unobstructed, free of interference) |
| Transmitter Power (EIRP) | 2.400-2.483 GHz |
| Live View Working Frequency | 2.4 GHz ISM, 5.8 GHz ISM |
| Live View Quality | 720P @ 30fps, 1080P @ 30fps |
| Diagonal Size (Propellers Excluded) | 350 mm |
| Max Service Ceiling Above Sea Level | 19685 ft (6000 m) |
| Hover Accuracy Range | Vertical: |
| Vision System | Forward Vision System |
| Velocity Range | ≤31 mph (50 kph) at 6.6 ft (2 m) above ground |
| Operating Range | 0-33 ft (0-10 m) |
| FOV | Forward: 60° (Horizontal), ±27° (Vertical) |
| Video Recording Modes | H.265 |
| Video | MP4/MOV (AVC/H.264; HEVC/H.265) |
| Supported SD Cards | microSD |
| Battery | 6000 mAh LiPo 2S |
| Operating Current/Voltage | 1.2 A@7.4 V |
| Video Output Port | GL300K: HDMI |
| Mobile Device Holder | GL300K: Built-in display device (5.5-inch screen, 1920×1080, 1000 cd/m2, Android system, 4 GB RAM＋16 GB ROM) GL300L: Tablets and smart phones |
| Voltage | 17.4 V |
| Rated Power | 100 W |
| Mobile App | DJI GO 4 |
| Latency | Phantom 4 Pro V2.0: 220 ms (depending on conditions and mobile device) |
DJI Phantom 4 Pro V2.0 Parts Library
External
Body shells, arms, covers, feet, LED covers, and structural hardware for this model.
DJI Phantom 4 Pro V2.0 Bottom ShellLower body cover, feet mounts, and underside structure.External
DJI Phantom 4 Pro V2.0 Top ShellUpper body cover and main exterior housing.External
DJI Phantom 4 Pro V2.0 Front Arm (Left)Left front arm assembly, motor mount, and landing area.External
DJI Phantom 4 Pro V2.0 Front Arm (Right)Right front arm assembly, motor mount, and landing area.External
DJI Phantom 4 Pro V2.0 Rear Arm (Left)Left rear arm assembly and rear hinge structure.External
DJI Phantom 4 Pro V2.0 Rear Arm (Right)Right rear arm assembly and rear hinge structure.External
DJI Phantom 4 Pro V2.0 Landing GearFront leg, rear foot pad, and landing support parts.External
DJI Phantom 4 Pro V2.0 Screw KitModel-specific screws for shells, arms, boards, and gimbal service.External
Circuit Boards
Core electronics, power control, navigation boards, and sensing modules.
DJI Phantom 4 Pro V2.0 Core BoardMain logic board for flight control, processing, and system communication.Circuit Boards
DJI Phantom 4 Pro V2.0 ESC BoardElectronic speed controller board for motor power delivery.Circuit Boards
DJI Phantom 4 Pro V2.0 GPS + IMU BoardPositioning and attitude sensing board used for stable flight.Circuit Boards
DJI Phantom 4 Pro V2.0 Vision SystemObstacle sensing or positioning camera module depending on the model.Circuit Boards
DJI Phantom 4 Pro V2.0 Infrared Sensing SystemInfrared distance or detection module used by supported models.Circuit Boards
Flex Cables
Signal, power, camera, vision, GPS, and LED flex cables routed through the aircraft.
DJI Phantom 4 Pro V2.0 ESC Board Flex CableBoard-to-board cable for ESC communication and power control.Flex Cables
DJI Phantom 4 Pro V2.0 GPS Flex CableSignal cable between GPS module and main electronics.Flex Cables
DJI Phantom 4 Pro V2.0 Vision Flex CableFlex route for obstacle sensing or downward vision assemblies.Flex Cables
DJI Phantom 4 Pro V2.0 Gimbal PTZ Flex CableCamera and gimbal control flex cable for pitch, roll, and yaw movement.Flex Cables
DJI Phantom 4 Pro V2.0 LED CableArm light or status LED wiring used in the aircraft shell.Flex Cables
Gimbal
Camera module, lens frame, gimbal motors, vibration board, and stabilizer hardware.
DJI Phantom 4 Pro V2.0 Complete Gimbal AssemblyFull camera and gimbal assembly for complete module replacement.Gimbal
DJI Phantom 4 Pro V2.0 Camera ModuleCamera sensor and lens module used inside the gimbal assembly.Gimbal
DJI Phantom 4 Pro V2.0 Gimbal Pitch MotorPitch-axis motor that controls camera tilt movement.Gimbal
DJI Phantom 4 Pro V2.0 Gimbal Roll MotorRoll-axis motor for horizon stabilization.Gimbal
DJI Phantom 4 Pro V2.0 Gimbal Yaw MotorYaw-axis motor and arm assembly for lateral stabilization.Gimbal
DJI Phantom 4 Pro V2.0 Gimbal Vibration BoardShock absorption mount between the aircraft body and gimbal module.Gimbal
Browse All Models
Enterprise