Mini Series / Released 2019
DJI Mavic Mini
Mini Series
Consumer
About the DJI Mavic Mini
The DJI Mavic Mini is a consumer drone from the Mini series, released in 2019. It offers a flight time of 30 minutes and a camera capable of recording 2.7K video using a 1/2.3” CMOS sensor.
Technical Specifications
| Takeoff Weight [1] | 249 g |
| Dimensions | Folded: 140×81×57 mm (L×W×H) |
| Max Ascent Speed | 4 m/s (S Mode) |
| Max Descent Speed | 3 m/s (S Mode) |
| Max Speed (near sea level, no wind) | 13 m/s (S Mode) |
| Maximum Takeoff Altitude | 3000 m |
| Max Flight Time | 30 minutes (measured while flying at 14 kph in windless conditions) |
| Max Wind Speed Resistance | 8 m/s (Scale 4) |
| Max Pitch Angle | 30° (S Mode) 20° (P Mode) 20° (C Mode) |
| Operating Temperature Range | 0° to 40°C (32° to 104°F) |
| GNSS | GPS+GLONASS |
| Hovering Accuracy Range | Vertical: ±0.1 m (with Vision Positioning), ±0.5 m (with GPS Positioning) Horizontal: ±0.3 m (with Vision Positioning), ±1.5 m (with GPS Positioning) |
| Max Control Speed (tilt) | 120°/s |
| Shutter Speed | Electronic Shutter: 4-1/8000s |
| Net Weight | 100 g |
| Sensor | 1/2.3” CMOS |
| Lens | FOV: 83° |
| ISO Range | Video: 100-3200 (Auto)100-3200 (Manual) Photo: 100-1600 (Auto) 100-3200 (Manual) |
| Still Image Size | 4:3: 4000×3000 |
| Still Photography Modes | Single shot Interval: 2/3/5/7/10/15/20/30/60 s |
| Video Resolution | 2.7K：2720×1530 24/25/30 p |
| Max Video Bitrate | 40 Mbps |
| Supported File System | FAT32（≤32 GB） |
| Photo Format | JPEG |
| Video Format | MP4 (H.264/MPEG-4 AVC） |
| Max. Bitrate | 4 Mbps |
| Mechanical Range | Tilt: -110° to 35° Roll: -35° to 35° Pan: -20° to 20° |
| Controllable Range | Tilt: -90° to 0° (default setting) -90° to +20° (extended) |
| Stabilization | 3-axis (tilt, roll, pan) |
| Angular Vibration Range | ±0.01° |
| Downward | Operating Range: 0.5-10 m |
| Operating Environment | Non-reflective, discernable surfaces |
| Operating Frequency[2] | Model MT1SS5: 5.725-5.850 GHz |
| Transmission Power (EIRP) | Model MT1SS5 |
| Operating Frequency | Model MR1SS5: 5.725-5.850 GHz |
| Max Transmission Distance (unobstructed, free of interference) | Model MR1SS5 |
| Video Transmission System | Enhanced Wi-Fi |
| Live View Quality | 720p/30fps |
| Diagonal Distance | 213 mm |
| Max Angular Velocity | 150°/s (S Mode) |
| Operating Current/Voltage | 1200 mA 3.6 V (Android) |
| Supported USB Port Types | Lightning, Micro USB (Type-B), USB Type-C |
| Latency (depending on environmental conditions and mobile device) | 170-240 ms |
| Rated Power | 18 W |
| Voltage | 7.2 V |
| Name | DJI Fly |
| Required Operating System | iOS v10.0 or later Android v6.0 or later |
| Supported SD Cards | UHS-I Speed Class 3 or above is required. A list of reccomended microSD cards can be found below. |
| Footnotes | 1. Aircraft takeoff weight (includes battery, propellers, and a microSD card). Registration not required in some countries and regions. Check local rules and regulations before use.These specs have been determined through tests conducted with the latest firmware. Firmware updates can enhance performance, so updating to the latest firmware is highly recommended. |
DJI Mavic Mini Parts Library
External
Body shells, arms, covers, feet, LED covers, and structural hardware for this model.
DJI Mavic Mini Bottom ShellLower body cover, feet mounts, and underside structure.External
DJI Mavic Mini Top ShellUpper body cover and main exterior housing.External
DJI Mavic Mini Front Arm (Left)Left front arm assembly, motor mount, and landing area.External
DJI Mavic Mini Front Arm (Right)Right front arm assembly, motor mount, and landing area.External
DJI Mavic Mini Rear Arm (Left)Left rear arm assembly and rear hinge structure.External
DJI Mavic Mini Rear Arm (Right)Right rear arm assembly and rear hinge structure.External
DJI Mavic Mini Landing GearFront leg, rear foot pad, and landing support parts.External
DJI Mavic Mini Screw KitModel-specific screws for shells, arms, boards, and gimbal service.External
Circuit Boards
Core electronics, power control, navigation boards, and sensing modules.
DJI Mavic Mini Core BoardMain logic board for flight control, processing, and system communication.Circuit Boards
DJI Mavic Mini ESC BoardElectronic speed controller board for motor power delivery.Circuit Boards
DJI Mavic Mini GPS + IMU BoardPositioning and attitude sensing board used for stable flight.Circuit Boards
DJI Mavic Mini Vision SystemObstacle sensing or positioning camera module depending on the model.Circuit Boards
DJI Mavic Mini Infrared Sensing SystemInfrared distance or detection module used by supported models.Circuit Boards
Flex Cables
Signal, power, camera, vision, GPS, and LED flex cables routed through the aircraft.
DJI Mavic Mini ESC Board Flex CableBoard-to-board cable for ESC communication and power control.Flex Cables
DJI Mavic Mini GPS Flex CableSignal cable between GPS module and main electronics.Flex Cables
DJI Mavic Mini Vision Flex CableFlex route for obstacle sensing or downward vision assemblies.Flex Cables
DJI Mavic Mini Gimbal PTZ Flex CableCamera and gimbal control flex cable for pitch, roll, and yaw movement.Flex Cables
DJI Mavic Mini LED CableArm light or status LED wiring used in the aircraft shell.Flex Cables
Gimbal
Camera module, lens frame, gimbal motors, vibration board, and stabilizer hardware.
DJI Mavic Mini Complete Gimbal AssemblyFull camera and gimbal assembly for complete module replacement.Gimbal
DJI Mavic Mini Camera ModuleCamera sensor and lens module used inside the gimbal assembly.Gimbal
DJI Mavic Mini Gimbal Pitch MotorPitch-axis motor that controls camera tilt movement.Gimbal
DJI Mavic Mini Gimbal Roll MotorRoll-axis motor for horizon stabilization.Gimbal
DJI Mavic Mini Gimbal Yaw MotorYaw-axis motor and arm assembly for lateral stabilization.Gimbal
DJI Mavic Mini Gimbal Vibration BoardShock absorption mount between the aircraft body and gimbal module.Gimbal
Browse All Models
Enterprise