DJI Zenmuse Z15-BMPCC
About the DJI Zenmuse Z15-BMPCC
Zenmuse Z15-BMPCC is DJI’s 2014 three-axis HD gimbal for a Blackmagic Pocket Cinema Camera with the specified Olympus 12 mm f/2.0 lens. DJI lists 1.26 kg for the gimbal and a separate 487 g reference camera/lens load. This is a camera stabilizer, not a drone or an included BMPCC kit; verify the camera, lens, GCU and mounting hardware separately.
Technical Specifications
| Device Class | Three-axis HD camera gimbal; camera and aircraft are separate components |
| DJI-Listed Camera | Blackmagic Pocket Cinema Camera (BMPCC) |
| DJI-Listed Lens | Olympus M.Zuiko Digital ED 12 mm f/2.0 |
| Gimbal Weight / Dimensions | 1.26 kg; 227 × 212 × 210 mm (H × D × W) |
| Reference Camera/Lens Load | 487 g for BMPCC, Olympus 12 mm f/2.0, battery and SD card; a listed setup, not an interchangeable maximum payload rating |
| Controlled Angle Accuracy | ±0.01° |
| Controlled Rotation | Pan ±360° continuous; tilt +50° to −140°; roll ±40° |
| Maximum Controlled Rotation Speed | Pan/tilt ±130°/s; roll ±30°/s |
| GCU / Input | 63 g GCU; 4S–12S LiPo input listed by DJI; follow the exact aircraft installation manual |
| Receiver Control | S-Bus/PPM receiver support; at least four spare receiver channels |
| Operating Temperature | −10°C to 50°C |
| DJI-Listed Aircraft Context | Matrice 600 Pro support specifications list this Z15 Series HD gimbal; verify the correct mount, GCU, control path and firmware |
| Legacy Software | DJI product page states Zenmuse Assistant Software distribution/updates were discontinued from 2018-05-15 |
| Official Sources | https://www.dji.com/zenmuse-z15-bmpcc; https://www.dji.com/support/product/matrice600-pro (checked 2026-10-16) |
Common Failure Modes
Symptoms: Gimbal does not initialize, hold horizon or respond to control.
Likely areas: GCU power, receiver channels, calibrated camera/lens and gimbal mechanics
Check the exact Z15 model and DJI installation requirements before considering component service.
Symptoms: Camera image or remote camera control is unavailable.
Likely areas: camera mode, HDMI/AV path, cable, power and control configuration
Distinguish camera and transmission faults from the gimbal; verify the documented camera/lens pair.
Repair Notes
Match the Z15 model label to its DJI-listed camera, lens, weight and control limits.
Verify GCU, power, receiver channels, aircraft mount and supported software/firmware before fitting.
A used camera, lens, GCU or mount is not presumed included; confirm components and written scope after inspection.