DJI Mini 3
Quick Answer
The DJI Mini 3 is a Mini series DJI drone released in 2022, with 248 g, 1/1.3-inch CMOS, 4K/30fps, 38 min, 10 km (FCC); 6 km (CE/SRRC/MIC), and O2 connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.
DJI Mini 3 Comparison Snapshot
| Model position | Mini series DJI drone, released 2022 |
| Flight profile | 248 g takeoff weight; 38 min flight time |
| Camera profile | 1/1.3-inch CMOS; 4K/30fps video |
| Signal profile | O2; 10 km (FCC); 6 km (CE/SRRC/MIC) max range |
| Repair comparison | Compare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone. |
| Buying comparison | For pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone. |
كيف يمكنك تحديد قطع الغيار DJI Mini 3؟
حدد عملية التجميع الفاشلة قبل شراء قطعة Mini 3. سجل النموذج الدقيق والمسلسل، والجانب والموضع، ومسار الموصل، ومراجعة اللوحة أو الغلاف، ودليل الخطأ، وتاريخ التأثير أو الرطوبة، وصور واضحة للمكون الذي تمت إزالته. قد تختلف الأجزاء التي تحمل اسم سلسلة Mini المشابه من حيث الملاءمة أو المعايرة أو سلوك البرامج الثابتة.
استخدمقاعدة بيانات قطع الغيار DJIلمصطلحات التجميع وإصلاح مسار السحبعندما تتضمن المهمة اللوحة الرئيسية، أو المحور المحوري، أو المستشعرات، أو ESC، أو اللحام، أو المعايرة بدلاً من الاستبدال الخارجي الموثق.
About the DJI Mini 3
The DJI Mini 3, released in 2022, is an entry-level quadcopter in DJI's Mini series designed for portability and accessibility. It features a 248 g takeoff weight and offers a maximum flight time of 38 minutes. The drone captures video at 4K/30fps and uses O2 transmission technology.
Technical Specifications
| Takeoff Weight | 248 g |
| Dimensions | Folded (without propellers): 148×90×62 mm (L×W×H) |
| Max Ascent Speed | 5 m/s |
| Max Descent Speed | 3.5 m/s |
| Max Horizontal Speed (at sea level, no wind) | 16 m/s |
| Max Takeoff Altitude | With Intelligent Flight Battery: 4000 m |
| Max Flight Time | 38 minutes (with Intelligent Flight Battery) |
| Max Hovering Time | 33 minutes (with Intelligent Flight Battery) |
| Max Flight Distance | 18 km (with Intelligent Flight Battery and measured while flying at 43.2 kph in windless conditions) |
| Max Wind Speed Resistance | 10.7 m/s (Level 5) |
| Max Pitch Angle | 40° |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + GLONASS + Galileo |
| Hovering Accuracy Range | Vertical: ±0.1 m with vision positioning, ±0.5 m with GNSS; horizontal: ±0.3 m with vision positioning, ±1.5 m with GNSS. |
| Internal Storage | N/A |
| Class | C0 (EU) |
| Shutter Speed | Electronic Shutter: 2-1/8000 s |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | DJI O2: 5.5 MB/s with DJI RC-N1 or DJI RC; Wi-Fi 5: up to 25 MB/s under DJI's stated low-interference dual-band laboratory conditions with footage stored on the SD card. |
| Image Sensor | 1/1.3-inch CMOS |
| Lens | 82.1° FOV, 24 mm equivalent, f/1.7, focus from 1 m to infinity. |
| ISO Range | Video: ISO 100–3200; Photo: ISO 100–3200. |
| Max Image Size | 8064×6048 |
| Still Photography Modes | Single Shot: 12 MP |
| Photo Format | JPEG/DNG (RAW) |
| Video Resolution | 4K 3840×2160 at 24/25/30fps; 2.7K 2688×1512 or FHD 1920×1080 at 24/25/30/48/50/60fps. HDR output is supported at 24/25/30fps. |
| Video Format | MP4 (H.264) |
| Max Video Bitrate | 100 Mbps |
| Supported File System | FAT32 (≤ 32 GB) |
| Color Mode | Normal |
| Digital Zoom | 4K: 2× |
| Stabilization | 3-axis mechanical gimbal (tilt, roll, and pan) |
| Mechanical Range | Tilt: -135° to 80° |
| Controllable Range | Tilt: -90° to 60° |
| Angular Vibration Range | ±0.01° |
| Sensing Type | Downward vision system |
| Downward | Precise hovering range: 0.5–10 m. |
| Operating Environment | Downward vision: textured, diffusely reflective surfaces above 20% reflectivity with light above 15 lux. |
| Video Transmission System | DJI O2 |
| Live View Quality | Remote controller: 720p/30fps. |
| Operating Frequency | 2.400-2.4835 GHz |
| Transmission Power (EIRP) | 2.4 GHz: <26 dBm FCC, <20 dBm CE/SRRC/MIC; 5.8 GHz: <26 dBm FCC/SRRC, <14 dBm CE. |
| Max Transmission Distance (free of interference) | Up to 10 km (FCC) or 6 km (CE/SRRC/MIC), unobstructed and interference-free; one-way transmission test. |
| Max Transmission Distance (with interference) | FCC typical-condition test, unobstructed: strong urban interference approx. 1.5–3 km; medium suburban interference approx. 3–6 km; low-interference suburb/seaside approx. 6–10 km. These figures do not guarantee an actual flight distance. |
| Lowest Latency | Approx. 200 ms |
| Antenna | 2 antennas, 1T2R |
| QuickShots Modes | Dronie, Helix, Rocket, Circle, and Boomerang |
| Compatible Batteries | DJI Mini 3 Pro Intelligent Flight Battery, DJI Mini 3 Pro Intelligent Flight Battery Plus* |
| Max Operating Time | DJI RC-N1 Remote Controller |
| Guaranteed software updates until | 2026/12/31 |
| Official detailed specs | https://www.dji.com/cn/mini-3/specs (checked 2026-10-16) |
Common Failure Modes
Symptoms: Cracked shell, bent arm, loose landing gear, abnormal vibration, or visible crash damage.
Likely areas: outer shell, arms, landing gear, motor mounts
Inspect the airframe before powering on and verify the exact replacement part against the model variant.
Symptoms: Motor start failure, rough spin, propulsion warning, overheating, or unstable hover.
Likely areas: motor, arm wiring, ESC board, power connectors
Check for impact damage, cable strain, and water exposure before replacing boards or motors.
Symptoms: Camera shake, gimbal overload warning, tilted horizon, calibration failure, or no camera image.
Likely areas: gimbal assembly, vibration board, camera module, gimbal flex cable
Avoid forcing the gimbal by hand and recalibrate after any gimbal or camera service.
Symptoms: Positioning drift, obstacle sensing warning, compass or IMU calibration prompt, or unstable low-altitude hover.
Likely areas: vision sensors, IMU, GPS/GNSS board, sensor flex cables
Clean sensor windows and verify calibration after shell, sensor, or board replacement.
Repair Notes
Confirm the exact model, variant, error message, and visible damage before selecting parts. Do not substitute parts from a similar model without verification.
Remove the battery before opening the aircraft. Check for moisture, corrosion, and overheated connectors before reconnecting power.
Flex cables and coaxial cables are fragile. Route them without sharp bends and inspect connector locks before closing the shell.
After replacing gimbal, vision, GNSS, IMU, shell, arm, or propulsion parts, run the required calibration and perform a controlled low-altitude test.
DJI Mini 3 Parts Library
External
3 serviceable parts in this zone.
Circuit Boards
5 serviceable parts in this zone.
Flex Cables
1 serviceable parts in this zone.
Gimbal
3 serviceable parts in this zone.
Compatible Power & Accessories
Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.