Neo Series / Released 2024
DJI Neo
Neo Series
Entry
135 g
About the DJI Neo
The DJI Neo is an entry-level drone in the Neo series, released in 2024. Weighing just 135 g, it features a maximum transmission range of 10 km and an 18-minute flight time. Its camera system can capture 4K video at 30fps using a 1/2-inch image sensor with O4 transmission.
Technical Specifications
| Takeoff Weight | Approx. 135 g |
| Dimensions | 130×157×48.5 mm (L×W×H) |
| Max Ascent Speed | 0.5 m/s (Cine mode) |
| Max Descent Speed | 0.5 m/s (Cine mode) |
| Max Horizontal Speed (near sea level, no wind) | 6 m/s (Normal mode) |
| Max Takeoff Altitude | 2000 m |
| Max Flight Time | Approx. 18 mins (approx. 17 mins with the Propeller Guards)* |
| Max Hovering Time | Approx. 18 mins (approx. 17 mins with the Propeller Guards) |
| Max Flight Distance | 7 km |
| Max Wind Speed Resistance | 8 m/s (Level 4) |
| Operating Temperature | -10° to 40° C (14° to 104° F) |
| Global Navigation Satellite System | GPS + Galileo + BeiDou |
| Hovering Accuracy Range | Vertical: |
| Internal Storage | 22 GB |
| Class | C0 (EU) |
| Shutter Speed | Video: 1/8000-1/30 s |
| Max Control Speed (tilt) | 100°/s |
| Max Download Speed | Wi-Fi: 25 MB/s |
| Image Sensor | 1/2-inch image sensor |
| Lens | FOV: 117.6° |
| ISO Range | 100-6400 (Auto) |
| Max Image Size | 12 MP Photo |
| Still Photography Modes | Single/Timed Shot |
| Photo Format | JPEG |
| Video Resolution | EIS Off: 4K (4:3): 3840×2880@30fps 1080p (4:3): 1440×1080@60/50/30fps EIS On: 4K (16:9): 3840×2160@30fps 1080p (16:9): 1920×1080@60/50/30fps Vertical Shooting 1080p (9:16) 1080×1920@60/50/30fps |
| Video Format | MP4 |
| Max Video Bitrate | 75Mbps |
| Supported File System | exFAT |
| Color Mode | Normal |
| Stabilization | Single-axis mechanical gimbal (tilt) |
| Mechanical Range | Tilt: -120° to 120° |
| Controllable Range | Tilt: -90° to 60° |
| Angular Vibration Range | ±0.01° |
| Sensing Type | Downward visual positioning |
| Downward | Precise Hovering Range: 0.5-10 m |
| Operating Environment | Downward: |
| Video Transmission System | O4 |
| Live View Quality | With DJI RC-N3 Remote Controller: Up to 1080p/60fps |
| Operating Frequency | 2.400-2.4835 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: |
| Max Transmission Distance (unobstructed, free of interference) | FCC: 10 km |
| Max Transmission Distance (unobstructed, with interference) | Strong Interference (urban landscape): Approx. 1.5-3 km |
| Max Transmission Distance (obstructed, with interference) | Low Interference and Obstructed by Buildings: Approx. 0-0.5 km |
| Lowest Latency | With DJI RC-N3 Remote Controller: Approx. 120 ms |
| Antennas | Two antennas, 1T2R |
| Protocol | 802.11a/b/g/n/ac |
| EIS | Supports RockSteady, HorizonBalancing, and turning stabilization off.* |
| Image Roll Correction | Supports correction of footage recorded on the drone |
| Communication Bandwidth | Max 40 MHz |
| Effective Operating Range | 50 m |
| Max Operating Time | Without Charging Any Mobile Device: 3.5 hours |
DJI Neo Parts Library
External
Body shells, arms, covers, feet, LED covers, and structural hardware for this model.
DJI Neo Bottom ShellLower body cover, feet mounts, and underside structure.External
DJI Neo Top ShellUpper body cover and main exterior housing.External
DJI Neo Front Arm (Left)Left front arm assembly, motor mount, and landing area.External
DJI Neo Front Arm (Right)Right front arm assembly, motor mount, and landing area.External
DJI Neo Rear Arm (Left)Left rear arm assembly and rear hinge structure.External
DJI Neo Rear Arm (Right)Right rear arm assembly and rear hinge structure.External
DJI Neo Landing GearFront leg, rear foot pad, and landing support parts.External
DJI Neo Screw KitModel-specific screws for shells, arms, boards, and gimbal service.External
Circuit Boards
Core electronics, power control, navigation boards, and sensing modules.
DJI Neo Core BoardMain logic board for flight control, processing, and system communication.Circuit Boards
DJI Neo ESC BoardElectronic speed controller board for motor power delivery.Circuit Boards
DJI Neo GPS + IMU BoardPositioning and attitude sensing board used for stable flight.Circuit Boards
DJI Neo Vision SystemObstacle sensing or positioning camera module depending on the model.Circuit Boards
DJI Neo Infrared Sensing SystemInfrared distance or detection module used by supported models.Circuit Boards
Flex Cables
Signal, power, camera, vision, GPS, and LED flex cables routed through the aircraft.
DJI Neo ESC Board Flex CableBoard-to-board cable for ESC communication and power control.Flex Cables
DJI Neo GPS Flex CableSignal cable between GPS module and main electronics.Flex Cables
DJI Neo Vision Flex CableFlex route for obstacle sensing or downward vision assemblies.Flex Cables
DJI Neo Gimbal PTZ Flex CableCamera and gimbal control flex cable for pitch, roll, and yaw movement.Flex Cables
DJI Neo LED CableArm light or status LED wiring used in the aircraft shell.Flex Cables
Gimbal
Camera module, lens frame, gimbal motors, vibration board, and stabilizer hardware.
DJI Neo Complete Gimbal AssemblyFull camera and gimbal assembly for complete module replacement.Gimbal
DJI Neo Camera ModuleCamera sensor and lens module used inside the gimbal assembly.Gimbal
DJI Neo Gimbal Pitch MotorPitch-axis motor that controls camera tilt movement.Gimbal
DJI Neo Gimbal Roll MotorRoll-axis motor for horizon stabilization.Gimbal
DJI Neo Gimbal Yaw MotorYaw-axis motor and arm assembly for lateral stabilization.Gimbal
DJI Neo Gimbal Vibration BoardShock absorption mount between the aircraft body and gimbal module.Gimbal
Browse All Models
Enterprise