Drone Wiki
FI FI20 languages
Drone Wiki language20

Zenmuse Series / Released 2016

DJI Zenmuse XT

Zenmuse Series Payload 270g
DJI Zenmuse XT
270g
Takeoff Weight

Quick Answer

The DJI Zenmuse XT is a Zenmuse series DJI drone released in 2016, with 270g, DJI camera system, DJI video modes, model-specific flight time, model-specific range, and DJI transmission system connectivity. Reboot Hub uses this page as a technical reference for specs, compatible OEM parts, common repair planning, and inspected pre-owned buying checks.

DJI Zenmuse XT Comparison Snapshot

Model positionZenmuse series DJI drone, released 2016
Flight profile270g takeoff weight
Camera profileCheck the model-specific camera module
Signal profileDJI transmission system
Repair comparisonCompare shell, arm, ESC, flex cable, GPS, vision sensor, and gimbal availability before choosing between this model and another DJI drone.
Buying comparisonFor pre-owned units, prioritize serial verification, battery health, gimbal calibration, flight test evidence, and warranty coverage over headline price alone.

DJI Zenmuse XT FAQ

What is the DJI Zenmuse XT best used for?

The DJI Zenmuse XT is best evaluated by its weight, camera system, flight time, range, and repairability. Use the specs and parts library on this page to compare it with other DJI models before buying or repairing.

Is the DJI Zenmuse XT repairable?

Yes. Reboot Hub maps serviceable parts for the DJI Zenmuse XT, including shell, arm, circuit board, flex cable, gimbal, and camera-related assemblies where available. Chip-level diagnosis is recommended when crashes, water damage, ESC faults, or gimbal errors are present.

How should I compare the DJI Zenmuse XT with another DJI drone?

Compare takeoff weight, sensor size, video mode, flight time, transmission system, parts availability, and warranty coverage. These factors affect image quality, travel rules, repair cost, and long-term ownership risk.

Can I buy pre-owned DJI Zenmuse XT parts from Reboot Hub?

Where inventory is available, Reboot Hub lists OEM-pulled DJI parts and compatible assemblies for the DJI Zenmuse XT. Match the exact model, part zone, and connector generation before ordering a replacement.

What should I check before buying a used DJI Zenmuse XT?

Check the serial number, activation status, battery health, gimbal movement, camera focus, sensor calibration, flight logs, shell damage, and whether the seller provides a functional test video or inspection report.

About the DJI Zenmuse XT

The DJI Zenmuse XT is DJI's first thermal gimbal payload, built with FLIR: uncooled VOx microbolometer in 640×512 or 336×256 resolutions with multiple lens options.

Technical Specifications

TypeThermal payload (FLIR)
Dimensions / Weight103×74×102 mm / 270 g
Thermal ImagerUncooled VOx, 640×512 or 336×256, 7.5/8.3 Hz, NETD <50 mK
Scene Range-25–135°C (high gain) / -40–550°C (low gain)
Lens Options6.8 / 7.5 / 9 / 13 / 19 mm
Gimbal±0.03° angular vibration
Data SourceDJI Zenmuse XT User Manual v1.2 (official)

Common Failure Modes

Gimbal vibration, drift or overload high

Symptoms: Horizon tilt, shaking image, gimbal overload warning, or motor whine.

Likely areas: gimbal motors, dampers, flex cables, IMU

Never force the gimbal by hand. Recalibrate after any transport shock or service.

No image / video feed loss high

Symptoms: Black feed, intermittent video, or payload not recognized by the aircraft.

Likely areas: SKYPORT/mount connector, coax and flex cables, main board

Inspect and reseat the detachable mount contacts first — connector wear is the most common cause on frequently swapped payloads.

Sensor or lens fault medium

Symptoms: Blurry frames, focus hunting, dead pixels, thermal NETD drift or measurement errors.

Likely areas: lens assembly, focus motor, image sensor, thermal shutter

Clean optics with proper tools only; thermal cameras need periodic flat-field calibration.

Moisture or ingress damage high

Symptoms: Fogged lens, corrosion at contacts, failures after rain or washdown.

Likely areas: seals, connectors, boards

Most payloads are IP44–IP54 at best — never submerge, and dry thoroughly before storage.

Repair Notes

Pre-service check

Confirm the exact payload model and firmware pairing with the aircraft before any parts decision — variants (e.g. H20 vs H20T) share bodies but differ internally.

Mount handling

Power off the aircraft before attaching or detaching the payload. Protect the SKYPORT contacts; cap the mount when not installed.

Optics care

Use lens-safe tools only. For LiDAR windows, blow off dust before wiping to avoid scratching the coated glass.

Post-repair calibration

After gimbal, IMU or camera service, run gimbal auto-calibration and verify stabilization and (for thermal/LiDAR) measurement accuracy before operational use.

DJI Zenmuse XT Parts Library

Verified Parts Atlas in progress

Parts Atlas is being mapped from verified Reboot Hub inventory. Model specs and repair guidance are available below.

Browse verified parts

Compatible Power & Accessories

Verified batteries, controllers, goggles, propellers, and accessories mapped from Reboot Hub inventory for this model.

Compatible batteries and accessories are being mapped from verified Reboot Hub inventory.

Repairing a DJI Zenmuse XT?

Match the exact part first, then choose OEM parts or technician installation.

Shop Parts Collection Repair Options