Inspire Series / Released 2016
DJI Inspire 2
Inspire Series
Professional
3440g
About the DJI Inspire 2
The DJI Inspire 2, released in 2016, is a professional-tier quadcopter from the Inspire series designed for high-end aerial imaging. It supports 5.2K/30fps video recording and features interchangeable cameras with 1-inch (X4S) and 4/3-inch (X5S) sensors. The system utilizes Lightbridge 2 transmission for a maximum range of 7 km.
Technical Specifications
| Flight time | 23-27 MINS |
| Speed | 94 KM/H |
| Max Takeoff Weight | 9.37lbs (4250 g) |
| GPS Hovering Accuracy | Vertical: ±1.64 feet (0.5 m) or ±0.33 feet (0.1 m, Downward Vision System enabled) |
| Max Ascent Speed | P-mode/A-mode: 16.4 ft/s (5 m/s) |
| Max Descent Speed | Vertical: 13.1 ft/s (4 m/s) |
| Max Wind Speed Resistance | 10 m/s |
| Max Flight Time | Approx. 27min (with Zenmuse X4S) |
| Indoor Hovering | Enabled by default |
| Operating Temperature | -4° to 104° F (-20° to 40° C) |
| Max Speed | 58 mph or 94 kph(Sport mode) |
| Max Controllable Speed | Pitch: 180°/s |
| Storage Temperature | Less than 3 months: -4° to 113° F (-20° to 45° C) |
| Net Weight | 515 g |
| Altitude Range | <32.8 feet (10 m) |
| Video resolution | 6K/5.2K |
| Sensory range | 30 M |
| Ultrasonic Sensor Operating Range | 0.33-16.4 feet (10-500 cm) |
| Ultrasonic Sensor Operating Environment | Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance) |
| Angular Vibration Range | ±0.01° |
| Controllable Range | Pitch: -130° to+40° |
| Mechanical Range | Pitch: -140° to+50° |
| Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
| Obstacle Sensing Range | 2.3-98.4 feet (0.7-30 m) |
| Live view | 1080 P |
| Operating Frequency | 2.400-2.483 GHz |
| Control range | 7 KM |
| Model | T650A |
| Max Angular Velocity | Pitch: 300°/s |
| Max Tilt Angle | P-mode: 35° (Forward Vision System enabled: 25°) |
| Max Takeoff Sea Level | 1.55 mi (2500 m) |
| Motor Model | DJI 3512 |
| Propeller Model | DJI 1550T |
| Diagonal Distance(propeller excluded) | 23.8 inch (605 mm, Landing Mode) |
| Interface Type | Detachable |
| Max Transmitting Distance(unobstructed, free of interference) | 2.4 GHz: |
| EIRP | 2.4 GHz: |
| Video Output Ports | USB, HDMI |
| Power Supply | Built-in battery |
| Charging | DJI charger |
| Dual User Capability | Host-and-Slave connection |
| Mobile Device Holder | Tablet or Smart Phone |
| Max Mobile Device Width | 170 mm |
| Battery | 6000mAh 2S LiPo |
| USB Supply Power | iOS: 1 A @ 5.2 V (Max); Android: 1.5 A @ 5.2 V (Max) |
| Voltage | 26.1 V |
| Rated Power | 180 W |
| Name | Intelligent Flight Battery |
| Velocity Range | <32.8 ft/s (10 m/s) at height of 6.56 feet (2 m) |
| Operating Range | <32.8 feet (10 m) |
| FOV | Horizontal: 60°; Vertical: 54° |
DJI Inspire 2 Parts Library
External
Body shells, arms, covers, feet, LED covers, and structural hardware for this model.
DJI Inspire 2 Bottom ShellLower body cover, feet mounts, and underside structure.External
DJI Inspire 2 Top ShellUpper body cover and main exterior housing.External
DJI Inspire 2 Front Arm (Left)Left front arm assembly, motor mount, and landing area.External
DJI Inspire 2 Front Arm (Right)Right front arm assembly, motor mount, and landing area.External
DJI Inspire 2 Rear Arm (Left)Left rear arm assembly and rear hinge structure.External
DJI Inspire 2 Rear Arm (Right)Right rear arm assembly and rear hinge structure.External
DJI Inspire 2 Landing GearFront leg, rear foot pad, and landing support parts.External
DJI Inspire 2 Screw KitModel-specific screws for shells, arms, boards, and gimbal service.External
Circuit Boards
Core electronics, power control, navigation boards, and sensing modules.
DJI Inspire 2 Core BoardMain logic board for flight control, processing, and system communication.Circuit Boards
DJI Inspire 2 ESC BoardElectronic speed controller board for motor power delivery.Circuit Boards
DJI Inspire 2 GPS + IMU BoardPositioning and attitude sensing board used for stable flight.Circuit Boards
DJI Inspire 2 Vision SystemObstacle sensing or positioning camera module depending on the model.Circuit Boards
DJI Inspire 2 Infrared Sensing SystemInfrared distance or detection module used by supported models.Circuit Boards
Flex Cables
Signal, power, camera, vision, GPS, and LED flex cables routed through the aircraft.
DJI Inspire 2 ESC Board Flex CableBoard-to-board cable for ESC communication and power control.Flex Cables
DJI Inspire 2 GPS Flex CableSignal cable between GPS module and main electronics.Flex Cables
DJI Inspire 2 Vision Flex CableFlex route for obstacle sensing or downward vision assemblies.Flex Cables
DJI Inspire 2 Gimbal PTZ Flex CableCamera and gimbal control flex cable for pitch, roll, and yaw movement.Flex Cables
DJI Inspire 2 LED CableArm light or status LED wiring used in the aircraft shell.Flex Cables
Gimbal
Camera module, lens frame, gimbal motors, vibration board, and stabilizer hardware.
DJI Inspire 2 Complete Gimbal AssemblyFull camera and gimbal assembly for complete module replacement.Gimbal
DJI Inspire 2 Camera ModuleCamera sensor and lens module used inside the gimbal assembly.Gimbal
DJI Inspire 2 Gimbal Pitch MotorPitch-axis motor that controls camera tilt movement.Gimbal
DJI Inspire 2 Gimbal Roll MotorRoll-axis motor for horizon stabilization.Gimbal
DJI Inspire 2 Gimbal Yaw MotorYaw-axis motor and arm assembly for lateral stabilization.Gimbal
DJI Inspire 2 Gimbal Vibration BoardShock absorption mount between the aircraft body and gimbal module.Gimbal
Browse All Models
Enterprise