DJI Goggles Integra with RC Motion 2 | Compatibility & Repair Notes

Quick Answer

This bundle combines Goggles Integra (RCDS13) and RC Motion 2 (RM220). DJI’s current compatibility matrix supports the listed Avata and selected Mini/Air/Mavic 3 pairings only when both devices and firmware align. DJI sources differ on DJI FPV support for the bundle, so that aircraft is not listed here as confirmed.

Specifications

Included systemDJI Goggles Integra (RCDS13) + DJI RC Motion 2 (RM220)

Goggles weightApproximately 410 g with built-in battery

Goggles displaysTwo 0.49-inch screens, 1920×1080 per eye, up to 100 Hz

Goggles operating timeApproximately 2 hours in DJI Avata test conditions

Motion controller weightApproximately 170 g

Motion controller operating timeApproximately 5 hours stationary with DJI Avata under DJI test conditions

Pairing ruleAircraft, goggles, motion controller and firmware must all be supported together

DJI FPV discrepancyDJI current matrix marks RC Motion 2 incompatible; separate DJI Store article discusses the bundle. Verify before listing as compatible.

Official sourceshttps://www.dji.com/goggles-integra | https://www.dji.com/rc-motion-2/specs | https://repair.dji.com/help/content?customId=01700010143&lang=en&paperDocType=ARTICLE&re=US&spaceId=17

Compatibility Notes

The aircraft must appear in both the Goggles Integra and RC Motion 2 compatibility rows. DJI’s current matrix marks RC Motion 2 × for DJI FPV, while a separate DJI Store article discusses an Integra Motion Combo for DJI FPV. Treat that exact pairing as unconfirmed until firmware and bundle behavior are reconciled.

DJI Avata 2 DJI Avata DJI Mini 4 Pro DJI Mini 3 Pro DJI Air 3 DJI Mavic 3 DJI Mavic 3 Cine DJI Mavic 3 Classic DJI Mavic 3 Pro DJI Mavic 3 Pro Cine

Inspection Checklist

Display and optics

Check brightness, color uniformity, dead pixels, burn-in, lens scratches, fogging, and eye-to-eye consistency.

Fit and wearable parts

Inspect face foam, headband tension, nose bridge contact, ventilation openings, and pressure points.

Power and ports

Confirm USB-C / power input behavior, battery charging, button response, firmware state, and fan noise.

Pairing readiness

Verify aircraft, controller, firmware, region, and transmission generation before promising compatibility.

Common Failure Modes

Display defect or optical haze

Common symptoms include dim image, color shift, dead pixels, internal dust, lens scratches, or uneven brightness.

Power, charging, or battery fault

Look for unstable boot, short runtime, charging interruption, USB-C looseness, or battery swelling / runtime drop.

Pairing or transmission issue

Usually tied to firmware, controller mismatch, antenna damage, region settings, or unsupported aircraft model.

Wearable shell damage

Headband, hinge, face foam, shell tabs, antenna mounts, and fan vents often show the real handling condition.

Repair Notes

Test RC Motion 2 inputs separately from goggles display checks.
A bundle can appear functional but still fail on target aircraft pairing if firmware is mismatched.
Record a pairing video when selling as a complete motion-control set.

Pre-Owned Buying Checks

Ask for actual screen-on photos or video, not only exterior product photos.
Confirm the exact goggles model; Goggles 3, Goggles 2, Integra, V2, and N3 are not interchangeable.
Verify compatible aircraft, controller, firmware version, and intended flight mode before purchase.
Check whether the unit includes battery, antennas, corrective lenses, face foam, cable, and original accessories.
For pre-owned units, prioritize function evidence and pairing proof over cosmetic wording.