DJI Zenmuse Z15-5D III (HD)
О модели DJI Zenmuse Z15-5D III (HD)
Zenmuse Z15-5D III (HD) is DJI’s three-axis HD gimbal specified for a Canon EOS 5D Mark III and Canon EF 24 mm f/2.8 IS USM lens. DJI lists a 1.53 kg gimbal and a separate 2664 g camera/lens reference load. It differs from the older Z15-5D specifications; identify the HD version and exact mounting/control setup before selecting parts.
Технические характеристики
| Device Class | Three-axis HD camera gimbal; camera and aircraft are separate components |
| DJI-Listed Camera | Canon EOS 5D Mark III |
| DJI-Listed Lens | Canon EF 24 mm f/2.8 IS USM |
| Gimbal Weight / Dimensions | 1.53 kg; 281 × 242 × 222 mm |
| Reference Camera/Lens Load | 2664 g for Canon EOS 5D Mark III, EF 24 mm f/2.8 IS USM, battery and SD card; a listed setup, not an interchangeable maximum payload rating |
| Controlled Angle Accuracy | ±0.02° |
| Controlled Rotation | Pan ±360° continuous; tilt +15° to −90°; roll ±25° |
| Maximum Controlled Rotation Speed | Pan ±90°/s; tilt ±130°/s; roll ±30°/s |
| GCU / Input | 63 g GCU; 4S–12S LiPo input listed by DJI; follow the exact aircraft installation manual |
| Receiver Control | S-Bus/PPM receiver support; at least four spare receiver channels |
| Operating Temperature | −10°C to 50°C |
| DJI-Listed Aircraft Context | Matrice 600 Pro support specifications list this Z15 Series HD gimbal; verify the correct mount, GCU, control path and firmware |
| Legacy Software | DJI product page states Zenmuse Assistant Software distribution/updates were discontinued from 2018-05-15 |
| Working Current | Static: 200mA (@25V); dynamic: 400mA (@25V); locked-rotor: 4A (@25V) |
| GCU Dimensions | 64.2 mm × 34.1mm × 19.5mm |
| S1000 Power Recommendation | 6S LiPo recommended when used with S1000 |
| Working Modes | Orientation-locked; Non orientation-locked; FPV (Reset) |
| Panoramic Photograph Function | 12 photos during one 360° rotation |
| Lightbridge 2 GCU Firmware | GCU firmware v2.6 or above required for the manual’s DJI Lightbridge 2 integration |
| Official Sources | https://www.dji.com/zenmuse-z15-5d-iii-hd; https://www.dji.com/support/product/matrice600-pro; https://dl.djicdn.com/downloads/zenmuse_z15_5d_iii_hd/en/Z15_5D_III_HD_User_Manual_v1.4_en.pdf (checked 2026-10-16) |
Типовые неисправности
Признаки: Gimbal does not initialize, hold horizon or respond to control.
Вероятные узлы: GCU power, receiver channels, calibrated camera/lens and gimbal mechanics
Check the exact Z15 model and DJI installation requirements before considering component service.
Признаки: Camera image or remote camera control is unavailable.
Вероятные узлы: camera mode, HDMI/AV path, cable, power and control configuration
Distinguish camera and transmission faults from the gimbal; verify the documented camera/lens pair.
Примечания по ремонту
Match the Z15 model label to its DJI-listed camera, lens, weight and control limits.
Verify GCU, power, receiver channels, aircraft mount and supported software/firmware before fitting.
A used camera, lens, GCU or mount is not presumed included; confirm components and written scope after inspection.